M+F KEG-Technik MINOMAT A 5/4 + AW 1100 KEG Filling Line (1998)

M+F KEG-Technik KEG Abfüllanlage

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Prodpfoxfvh Sox Apdec

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Podpfx Apjw U A T Iedorc Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data - Capacity: 20 hL per batch - Hot water tank: 4,586 L, steam heating jacket - Cold water tank: 4,400 L, glycol cooling jacket - Heating: Steam - Control: Semi-automatic with PLC Scope of Delivery  - Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated - Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket Prsdpjxcng Iefx Apdec - Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket - Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity - 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel - Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control  

Year of construction: 1999, condition: used, 4 upright fermentation vats with jacket cooling Additional title: vertical, coolable, stainless steel vessels Max. content: 2500 l Length: 1600 mm Width: 1600 mm Pjdpfsxwy Slox Apderc Height: 1717 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free standing Base construction: cylindrical vessel, open at the top, with square tube feet on domes Features: Shell cooling, automatic-valve with temperature control, central bottom outlet with shut-off valve

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance. Psdpfxow Ag Nds Apdsrc

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  - Capacity: 5/10hl - Electrical heating: 27kW / 400V (special ceramic heating element) - Equipment: - 3 appliances: brewing kettle, lauter tun, whirlpool - Additional equipment included: - Manual filler (wall-mounted) - Keg filler - 2 fermentation and storage tanks (650L each) - 1 fermentation and storage tank (1200L) - All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) - Glycol cooler - Plate heat exchanger Scope of delivery  - 1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) - 1x manual filler (wall-mounted) - 1x keg filler - 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) - 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) Podpfxoyb R Its Apderc - 1x glycol cooler - 1x plate heat exchanger

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Content: 500 litres 1x Dreher brite tank Content: 1000 litre Podez Hlclepfx Apderc 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table - double sink

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Prsdpfx Apozm R Amsdoc Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Year of construction: 2020, condition: new, functionality: fully functional, This new brewery, still wrapped in plastic from the production factory, has been purchased in 2020 but was never installed after planning permission failed by the local government. So, it's a complete set, see details, alle brand new (!) but for a very attractive price. New it will be approx. 640K, this one is for 360.000€. All manuals etc available, as well as a plan for installation with support from manufacturer (separate billing). PLEASE NOTE: WE DO NOT SUPPLY VISA / WE DO NOT PROVIDE SPREAD PAYMENT. We are a brewery, not a trader nor manufacturer. Predpfxozz Rbxo Apdsc

Condition: like new (used), MESPACK H-320 SCD – Automatic Pouch Filling and Sealing Machine The MESPACK H-320 SCD is an automatic pouch filling and sealing machine designed for the industrial filling and packaging of products in pre-formed flexible pouches. MESPACK is a manufacturer specializing in flexible packaging machinery, and the H-320 SCD is designed to automate the various stages of the process, including pouch handling, opening, filling, and sealing, within an industrial line. The machine automatically manages the pouches from feeding and positioning to final filling and sealing, providing an integrated solution for continuous production packaging lines. MAIN FEATURES -Manufacturer: MESPACK -Model: H-320 SCD Psdpfx Apjy Nzm Dedjrc -Type: Automatic pouch filling and sealing machine -Format: Pre-formed flexible pouches -Automatic pouch feeding -Pouch opening and positioning -Product filling station -Automatic sealing -Automatic packaging handling -Continuous industrial production -Robust construction for professional use -Integrable with different feeding and dispensing systems -Compatible with inspection, transportation, and end-of-line equipment APPLICATION The MESPACK H-320 SCD is designed to automate the various operations necessary for packaging products in pre-formed pouches. The machine individually receives each pouch, positions and opens it, and then performs the filling operation using the corresponding dispensing system. Once the product has been introduced, the machine automatically seals the pouch, preparing it to continue to the next stage of production. Depending on the product and the line configuration, it can be combined with: -Product feeding systems -Volumetric dispensers -Liquid dispensers -Weighing machines -Weight controllers -Metal detectors -Inspection equipment -Conveyors -Stacking and end-of-line systems APPLICATIONS A particularly interesting solution for food manufacturers and processing and packaging companies looking to automate the filling and sealing of products in pre-formed flexible pouches. The MESPACK H-320 SCD can be integrated into both existing packaging lines and new installations designed for the processing and automatic packaging of products in pouch format. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.