Used Floating Dredgers for sale (313)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Kistolmács
18,180 km
Float dredger with bucket conveyor
Ungarische SonderanfertigungVUK 120/15,5
Call
Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth.
The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye.
Hedpfxevv Nwxj Af Tofp
As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network.
Success:
Your message has been sent.
Listing
Susuz
16,862 km
Floating dredger
Galen2m3 Dragline Bucket
Call
Condition: new, Power that transcends tough terrains: Galen Group's dragline buckets effortlessly handle the heaviest loads with durability and engineering excellence! Please contact us for inquiries.
Hfedpfx Asvzhb Tjf Top
Success:
Your message has been sent.
Listing
Wymysłów
17,869 km
Flygt 2610.171 submersible pump, 40 m³/h, 1.2 kW, 400 V, float switch control
Flygt2610.171 40 m³/h 1,2 kW 400 V
Call
Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications.
The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions.
The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump.
Technical specifications:
Manufacturer: Flygt / ITT Water & Wastewater AB
Hedo Aibdcspfx Af Tofp
Model: 2610.171
Capacity: 40 m³/h – 40,000 l/h
Power rating (as per nameplate): 1.2 kW
Power supply: three-phase
Voltage: 400 V star (Y) / 230 V delta (Δ)
Rated current: 2.7 / 4.7 A
Frequency: 50 Hz
Rotational speed: 2740 rpm
Operating mode: S1 – continuous operation
Ingress protection: IP68
Maximum medium temperature: 40°C
Power factor cos φ: 0.85
Weight: approximately 19 kg
Made in: Sweden
Included in the set:
Submersible pump
Float switch
Power cable
Control module with switch and indicator lights
CEE power plug
Success:
Your message has been sent.
Listing
Würzburg
18,500 km
Float and laminated glass cutting line
LisecESL-60/30RS / VB-33
Call
Condition: used, overall weight: 40,000 kg, No. 3282
Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33
Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027
According to our customer / the previous owner, the line is fully functional and can be inspected on site
Scope of delivery
Only the areas framed in yellow in the layout
Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22
Item numbers as marked on the photos
Key technical data
Designed for jumbo size 6000 x 3210 mm
Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness
Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness
2 laminated glass cutting bridges Lisec VB-33 for higher output
Automatic cutting table with grinding unit for edge deletion (Low-E)
Automatic breaking in X and Y direction
Conveyor sections up to max. 50 kg/m2
Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V
Compressed air 6 - 8 bar
Total of the stated connected loads approx. 210 kVA
Laminated glass cutting
Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg
Item 2: Assembly Lisec VZ Line 2
Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg
Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg
Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA
Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg
Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg
Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg
Float glass cutting
Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg
Item 10: Belt conveyor section Lisec BTA-40/26
Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg
Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg
Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg
Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg
Hfedj Af Aqwepfx Af Top
Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg
Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg
Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg
Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg
Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg
Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg
Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg
Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg
Total weight approx. 40000 kg
Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly
On-site inspection is possible and recommended
Any warranty is excluded, sold as seen / as is
Success:
Your message has been sent.
Listing
Germany
18,654 km
LISEC Combined VSG & Float Glass Cutting Line
LISECCombined VSG & Float Glass Cutting Line
Call
Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details.
- Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.
Hedpo Agixyefx Af Tefp
Discover more used machines
Success:
Your message has been sent.
Listing
Navan
18,594 km
Costarelli Float Sink Tank with Drag Con
CostarelliRange of
Call
Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation.
Hsdpfx Aowm Nd Eof Tefp
Success:
Your message has been sent.
Listing
Tuliszków
17,869 km
Submersible pump ORPU Sonel B 60/2 – 80 m³/h, 5.2 kW, 400 V, float switch
ORPUSonel B 60/2
Call
Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water.
Technical specifications:
Hfjdoz Syk Ajpfx Af Tsp
Brand: ORPU
Model: Sonel B 60/2
Maximum flow rate: 80 m³/h – 80,000 l/h
Maximum head: 25 m
Power: 5.2 kW
Power supply: 400 V, three-phase
Frequency: 50 Hz
Manufacturer: Oranienburger Pumpen + Verdichter GmbH
Country of origin: Germany
The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.
Success:
Your message has been sent.
Listing
Pinnow
18,153 km
Floating pontoon
Schwimm-Ponton
Call
Condition: ready for operation (used), Floating pontoon made from gravel extraction.
Hfedpozck A Tsfx Af Tsp
Success:
Your message has been sent.
Listing
Kehra
17,096 km
Moulder
WEINIGHYDROMAT 2000 FLOATING VERTICAL SPINDLES
Call
Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED
FEED MOTOR 22 KW
FEEDRATE MAX 100 M/MIN
300MM WIDE MOULDER
1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING
Hfodpfxj Akchqo Af Top
2ND SPINDLE TOP 30 KW WITH COUNTER BEARING
3RD SPINDLE LEFT 22 KW OPPOSED
4TH SPINDLE RIGHT 22 KW OPPOSED
VERTICAL SPINDLES FLOATING
VERTICAL SPINDLES OPPOSED
SPINDLES 6,000RPM
WORKING WIDTH 300 MM
PLANING HEIGHT 160 MM
NUMBER OF SPINDLES 4
BOTTOM SPINDLES 1
SPINDLE DIAMETER 50 MM
CONTINUOUSLY VARIABLE INVERTER DRIVE FEED
FEED MOTOR
22 KW
MAIN MOTOR POWER 30 KW
SPINDLE(S) WITH COUNTERBEARING
SEPERATE MOTOR PER SPINDLE
MOTORIC ADJUSTMENT
PROGRAMMABLE CONTROLLER
INFEED TABLE LENGTH 700 MM
TABLE ROLLERS DRIVEN
LUBRICATION PUMP AUTOMATIC
SHORT INFEED WITH 220MM TOP FEED ROLLERS
CONFORMITY MARKING
CE MARK
TOTAL CONNECTION
126 KW
Success:
Your message has been sent.
Listing
Manchester
18,620 km
Large capacity Float / Sink Tank
ROTAJETFloat Sink tank
Call
Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included.
Hfodpfxow D Ugge Af Tep
Success:
Your message has been sent.
Listing
Germersheim
18,632 km
Suction dredger
MTSDINO VARIO 12 SB 1325
Call
Condition: used, functionality: fully functional, mileage: 21,000 km, power: 375.1 kW (509.99 HP), gearing type: automatic, fuel type: diesel, color: green, axle configuration: 8x4, first registration: 02/2023, Year of construction: 2023, operating hours: 788 h, Equipment: ABS, traction control, Inspected used vehicle SB 1325 – Available from December 15, 2026
Standard superstructure DINO Vario 12 m³
MAN TGS 8x4 MTS suction excavator DINO Vario 12 m³
Standard equipment:
MTS suction superstructure
MTS double fan (patented)
MTS material separation system (patented)
Automatic filter cleaning
Compressed air compressor 4.5 m³/min, 8 bar
POWERARM articulated boom with 7 m suction hose
3 stabilizer supports
Hfjds Ahyp Tjpfx Af Top
PLC control with remote diagnostics
Radio remote control
Set of demolition and air release tools
Storage option
Optional extras:
Container and lid with stainless steel lining
MEGAARM articulated boom
Rotating suction pipe system IKE/PERFOR
Suction & drive & steer HYDROSTAT
Full fairing DESIGN
High-pressure water system 30 l/min, 160 bar, 500 l tank
Full fairing DESIGN
3 vibrators on the suction hose
Industrial equipment:
Abitron instead of Groß Funk
Industrial package I: grounding system
Industrial package II: gas sensor
Industrial package III: Ex Zone II radio
Industrial package V: conductive suction hose
Environmental equipment:
Noise reduction package: sound insulation for the container
Special accessory module:
Storage boxes, stainless steel
Access ladder, machine house, 2 x
Ladder under hose rack
Hose reel, rear for MTS spade
Special accessory - lighting:
Lighting package I: 3 LED lights on the vehicle frame
Lighting package II: 2 LED lights on the central joint of the articulated boom
Lighting package III: LED light strips in the tool box
Lighting package V: LED lights next to the articulated boom shaft
Lighting package VIII: Light bar on the lid (rear)
Special accessory - safety:
4 flashing beacons
Other special equipment:
Trailer coupling, ball hitch 3.5 t with support
Water tap on the right (passenger side)
The general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen-gebrauchtfahrzeu ge
Subject to errors and prior sale.
The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.
Success:
Your message has been sent.
Listing
Kehra
17,096 km
Moulder
WEINIGHYDROMAT 2000 FLOATING VERTICAL SPINDLES
Call
Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED
FEED MOTOR 22 KW
FEEDRATE MAX 100 M/MIN
300MM WIDE MOULDER
1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING
2ND SPINDLE TOP 30 KW WITH COUNTER BEARING
3RD SPINDLE LEFT 22 KW OPPOSED
4TH SPINDLE RIGHT 22 KW OPPOSED
VERTICAL SPINDLES FLOATING
VERTICAL SPINDLES OPPOSED
SPINDLES 6,000RPM
WORKING WIDTH 300 MM
PLANING HEIGHT 160 MM
NUMBER OF SPINDLES 4
BOTTOM SPINDLES 1
Hfsdpsz Dnr Rjfx Af Tsp
SPINDLE DIAMETER 50 MM
CONTINUOUSLY VARIABLE INVERTER DRIVE FEED
FEED MOTOR
22 KW
MAIN MOTOR POWER 30 KW
SPINDLE(S) WITH COUNTERBEARING
SEPERATE MOTOR PER SPINDLE
MOTORIC ADJUSTMENT
PROGRAMMABLE CONTROLLER
INFEED TABLE LENGTH 700 MM
TABLE ROLLERS DRIVEN
LUBRICATION PUMP AUTOMATIC
SHORT INFEED WITH 220MM TOP FEED ROLLERS
CONFORMITY MARKING
CE MARK
TOTAL CONNECTION
126 KW
Success:
Your message has been sent.
Listing
Germersheim
18,632 km
Suction dredger
MTSDino 8
Call
Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from April 1, 2027.
Used suction dredger directly from the manufacturer – for sale or rent.
Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you can get used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for its next assignment.
Currently Available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2
Suction unit:
Tested quality directly from the manufacturer
6 months warranty
1 year/500 operating hours maintenance-free
Operating hours of fan: 652h
Operating hours of compressor: 670h
Standard equipment
MTS suction unit
MTS double fan
MTS material separation system (patented)
Automatic filter cleaning, compressed air compressor 4.5m³/min, 8 bar
Articulated boom POWERARM with 7m suction hose
3 stabilization supports
PLC control with optional remote diagnostics
Radio remote control (brand: Gross Funk)
Storage option
Optional module options
Container & lid, stainless steel lining
Stainless steel design for toolboxes
Articulated boom EVO-POWER ARM
Rotary suction pipe system IKE/PERFOR
Suction & drive & steering HYDROSTAT
Electric steering Volvo
Full fairing DESIGN
High-tip HIGH-TIP with 4 supports (2+2)
High-pressure water system 30 l/min
Vibrators on the suction hose
Industrial equipment
Industrial package II: Gas sensor
Infinitely variable speed control for fan
Filtration unit for oil circuit
Environmental equipment
Hydraulic oil, biodegradable
Noise reduction package: Sound insulation of the container exterior
Accessories - Module
Container with 2 pneumatic vibrators
Access ladder, machine house (2x)
Ladder under the hose rack
Accessories - Lighting
Hodpfx Afezvw U Us Tefp
Light package II: 2 LED lights on the central joint of the articulated boom
Light package III: LED light strips in the toolbox
Light package V: LED lights next to the articulated boom shaft
Light package VII: Fire brigade lighting
2x Light package VIII: Light bar at the rear
Accessories - Safety
4 warning lights
Anti-slip coating
Accessories - Filter system
Filter cleaning with pneumatic vibrator
Accessories - Tools
Vogt pneumatic shovel
Atlas Copco 20 KG hammer
Air lance
The general terms and conditions for used vehicles of MTS GmbH apply and can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen
Errors and prior sale excepted.
The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.
Success:
Your message has been sent.
Listing
Saasveld
18,476 km
Sink-float tank, centrifuge, screen
AMA recycling technologies
Call
Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics.
The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues.
Hfedpfxoxhf H Ns Af Top
A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order.
Please contact us for further information.
Success:
Your message has been sent.
Listing
Lukov u Zlína
18,025 km
Plasma
Pierce Control Automation3000+ GP
Call
Condition: good (used), functionality: fully functional, Year of construction: 2020, CNC Plasma Cutting Machine PIERCE 02047 RUM 3000+ GP including accessories
Workstation Specifications
1) CNC Cutting Machine RUM 3000+ GP
Year of manufacture: 2020
Serial No.: 02047
Machine condition: Used, fully operational
Working cutting width: 2,500 mm
Cutting length: 12,000 mm
Maximum cutting width: 2,550 mm
Maximum cutting length: 12,050 mm
Machine track length: 14 m (12 m + 2 m parking area)
Position of PIERCE 19" control unit: Left side of the machine gantry
Floating motorized oxy-fuel cutting head with EI and THC: 1 pc
Floating motorized plasma cutting head with IHS and THC: 1 pc
Material types: Mild steel / stainless steel
Oxy-fuel technology – cutting gas: Propane
Oxy-fuel torch type: HARRIS
Position of utility supply lines along the longitudinal axis: Lower position
Energy chain type: Energy chain with aluminum cover, width 200 mm
Data transfer to control unit: USB port + Wi-Fi network (client)
Automatic machine zero-position detection: Yes
Laser Cross optical positioning system: Yes, 1 pc (mounted on the plasma head)
Plasma technology – anti-collision system: Magnetic, 1 pc
Machine operating ambient temperature: +10 °C to +40 °C
Minimum ambient temperature must not fall below +5 °C
2) Plasma Unit
Hypertherm HPR260XD with AGC (Automatic Gas Console)
Year of manufacture: 2013
Serial No.: 260XD-004852
3) Cutting Table
Hsdps Ait U Rsfx Af Tsfp
TIGEMMA Medium Series
Working table dimensions: 2.5 m × 12 m
Overall internal table dimensions: 2.6 m × 12.3 m
Table load capacity: 1,800 kg/m²
Maximum cutting material thickness: up to 220 mm
Table section control: Pneumatic (rail system)
Success:
Your message has been sent.
Listing
Ortenberg
18,519 km
Wastewater treatment plant with lamella clarifier, etc.
Kühn, Behncke, Klees u.a.
Call
Condition: used, Year of construction: 2021, functionality: fully functional, Components/parts of a wastewater treatment plant are for sale due to the closure of the site in 63683 Ortenberg.
The following plant components are available for sale:
2 x Bühne3 filter tanks, D-750, manufactured in 2022
1 x FF Bio Container, 5 cbm, with float from Kühn Wastewater Technology (biological degradation of sugar in wastewater)
1 x FF Bio Container, 10 cbm, with float from Kühn Wastewater Technology (biological degradation of sugar in wastewater)
1 x Lamella scraper from Kühn Wastewater Technology for approx. 2000 liters of wastewater/hour, with filter bag frame
Hfsdpfj Ai D Ayjx Af Tsp
1 x Stainless steel tank, 19 cbm
1 x Sedimentation tank from Firma Klees (mixing tank for polymer and iron(III), volume 4.6 cbm), manufactured in 2016
You can purchase individual plant components. Please feel free to submit an offer!
Self-collection in 63683 Ortenberg.
Success:
Your message has been sent.
Listing
Ballygowan
18,523 km
Glass washing machine
NeptunMASTER WAVE HP 2800
Call
Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019.
Wave HP 2862-80 HD
Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass.
Inlet conveyor
The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running.
Prewashing and washing
A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h.
Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces.
Water management
Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production.
Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles.
Hfedpj Ah Hgzsfx Af Top
Drying and energy saving
The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying.
Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions.
This equipment is being sold Ex-Works, with the buyer responsible for packing & shipping.
If you have any questions or need more information, feel free to send us a message or give us a call.
Success:
Your message has been sent.
Listing
Sierakowska Huta
17,772 km
Multi-blade edger with floating saw blade
WEINIGK 23T 245/120 laser
Call
Condition: excellent (used), CATALOGUE NUMBER 7890
Technical specifications:
- track width 245mm
- shaft width for the edger 380mm
- shaft width for the multi-blade saw 320mm
- max. blade diameter 350mm
- blade arbor diameter for the edger 80mm
- blade arbor diameter for the multi-blade saw 65mm
- max. cutting height 120mm
- table width with clearance 900mm
- table length 1780mm
– from above:
- feed rollers/ejectors
- smooth pressure shaft
- feed rollers
- smooth pressure shaft
- insert for short pieces
- shaft with saws
- 2 smooth pressure shafts
– from below:
- guide
- feed rollers/ejectors
- track
- central lubrication
- laser
- stepless feed speed adjustment
- feed motor 1.1kW
- main motor 30kW
- manual lifting of the machine body
- manual lifting of the saw shaft
- dust extraction nozzle diameter 210mm
- overall dimensions L/W/H 1900x1500x1800mm
- weight approx. 2000kg
ADVANTAGES
- German production
- stepless feed speed adjustment
- floating blade shaft for edging
- multi-blade saw sleeve included
- laser
- insert for short pieces
- multi-blade saw, used, very good condition
Hjdpfx Afj Af Ivus Tofp
Net price: 55900 PLN
Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR
(Prices may change due to significant fluctuations)
Success:
Your message has been sent.
Listing
Burghaun
18,457 km
Seppi M. H-SMO-B 125 / Vario Flow / floating / NEW
SeppiM. H-SMO-B 125 / Vario Flow / flottierend / NEU
Call
Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ).
Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available
Price: €11,790.00 net / €14,030.10 gross
Working width: 125 cm
Overall width: 140 cm
Depth: 120 cm
Height: 60 cm
Weight: 380 kg
Support roller: 152 mm
V-belts: 4
- Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land
- Mulches grass and light brush up to 7 cm diameter
- Suitable for excavators from 5 to 13 tons
- Designed for mounting on various adapter plates
- Drive designed for hydraulic motor according to the carrier unit's oil flow
- Indirect belt drive with 4 V-belts
- Drop-forged counter blades
- Double-skinned housing made from high-tensile steel
- Adjustable discharge hood with rear rubber guard
- Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm
- Rotor wall thickness: 12.5 mm
- Front protection with chains
- Colour: red RAL3020 · anthracite RAL7021
Hedpjymi Enefx Af Tsfp
OPT 371 Rotor with SMO flails (standard)
- 12 pieces, part no. 130.02.001
OPT 291 VARIO FLOW
- Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve
- Displacement in cm³ (min-max): 29 - 58
- Required hydraulic pressure in bar (min-max): 150 - 250
- Required hydraulic oil flow in l/min (min-max): 60 - 120
OPT 099 Floating mounting (parallel linkage)
Optional: MS08 adapter plate incl. bolts and installation = €750.00 net
Three hydraulic connections required: pressure, return, and drain.
Unit delivered without hoses or couplings.
Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available.
We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse!
Simply contact us at / .
Finance options available upon request.
We are an official Seppi M. sales and service partner.
We are an official Magni telescopic handler sales and service partner.
We are an official DMS sales and service partner.
We are an official Westtech sales and service partner.
We are an official JCB construction machinery sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
We are an official Holp sales and service partner.
We are an official OilQuick sales and service partner.
With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany.
We can supply the full range of Seppi M. products!
Errors and prior sale excepted!
= Further Information =
Please contact Marius Herden for further details.
Success:
Your message has been sent.
Listing
南阳市
10,416 km
Glass tempering furnace
NothGlassBU1Е60
Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty
We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system.
The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components.
Refurbishment work includes the replacement of:
- Heating elements
- Ceramic rollers
- Electric motors
- Automation and control systems
- Electronic components
The furnace has been fully refurbished and prepared for further industrial operation.
Warranty: 12 months.
### Main Technical Specifications
- Manufacturer: NorthGlass (China)
- Model: BU1E60
- Condition: Used, fully refurbished
- Maximum glass size: 2,850 × 6,000 mm
- Minimum glass size: 300 × 300 mm
- Glass thickness: 5–22 mm
- Heating system: Forced convection
- Convection system: 6 high-temperature upper convection fans with variable frequency control
- Production capacity: 16–18 batches/hour (5 mm clear glass)
- Heating power: 1,143 kW
- Quenching fan power: 2 × 220 kW
- Rated electrical capacity: 1,100 kVA
- Minimum Low-E emissivity: ε = 0.04
- Quality standard: GB15763.2-2005
### Supported Glass Types
- Clear float glass
- Low-E coated glass
- Patterned glass
Hfodpsz Rv Dpsfx Af Tsp
- Body-tinted glass
### Equipment Configuration
The furnace includes:
- Loading table
- Heating section
- Flat glass quenching section
- Unloading table
- Electrical control system
- Frequency converters
- Air circulation system
- Quenching fans with vibration isolation frames
### Key Advantages
- Fully refurbished with replacement of major components
- Advanced forced convection heating technology
- Suitable for processing Low-E glass
- Large processing capacity of up to 2,850 × 6,000 mm
- High productivity of up to 18 batches per hour
- 12-month warranty
- Cost-effective alternative to purchasing a new glass tempering furnace
### Price and Delivery
Price: Upon request
Delivery terms and additional technical information are available upon request.
Contact us for a detailed quotation, additional photographs, videos, and technical documentation.
Success:
Your message has been sent.
Listing
Burghaun
18,457 km
Seppi M. H7 125 flail mulcher with rotary swivel / floating
SeppiM. H7 125 Schlegelmulcher Drehkranz / flottierend
Call
Condition: new, working width: 1,250 mm, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request).
Seppi M. H7 125 flail mower / incl. swivel ring / incl. floating mounting / NEW unit / in stock & immediately available
Price: €17,890.00 net / €21,289.10 gross
- Working width: 125 cm
- Overall width: 140 cm
- Depth: 97 cm
- Height: 57 cm
- Weight: 410 kg without accessories
- mulches grass and light brush up to 7 cm in diameter
- for excavators from 5 to 15 tons
- Universal interface for mounting various adapter plates
- S420: double-walled housing made of high-strength S420 steel
- WEARPLATE: Housing: with replaceable wear plates
- LOW PROFILE: Low profile design
- Indirect V-belt drive with 4 V-belts
- Drive designed for hydraulic motor depending on the
flow rate of the carrier machine
- 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height adjustable
- COUNTER CUTTERS: two rows of replaceable forged counter blades
- Rotor wall thickness: 12.5 mm
- Front protection with chains
- Rear protection made of rubber
- Color: red RAL3020 · anthracite RAL7021
OPT 371 HELIX ROTOR TECHNOLOGY
- Triple helix rotor with SMO flail (standard)
- 12 pieces, part number 130.02.001
OPT 291 VARIO FLOW
- Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve
- Displacement in cm³ (min-max): 29 - 58
- Required hydraulic pressure in bar (min-max): 100 - 300
- Required hydraulic flow rate in l/min (min-max): 55 – 150
OPT 099 Floating mounting (parallelogram guidance)
OPT 555 Swivel adapter
OPT 372 hydraulic 190° swivel device
3 hydraulic lines are required: feed, return and leakage oil.
Optional: MS08 adapter plate incl. screws and mounting = €880.00 net
Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available.
In our warehouse, we have a very large selection of various Seppi M. products that are immediately available!
Mr. Herden (phone number available upon request) will be happy to assist you.
Upon request, we will also be happy to provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Holp sales and service partner.
We are an official Magni telehandler sales and service partner.
Hjdpfxjy E Etye Af Tofp
We are an official DMS sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official JCB construction machinery sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete Seppi M. range for you!
Errors and prior sale are subject to change!
Intended use: Agriculture
Please contact Marius Herden for more information.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Stanmore
18,790 km
Beam Saw
MacmazzaTS90
Call
Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020.
Manufacturer: Macmazza
Model: TS90
Year of construction: 2020
Condition: used
Category ID: 1426
Type ID: 844
Type: Beam Saw
2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME
Price: €39.900net – negotiable
An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours.
The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed.
RECORDED OPERATING DATA
• Total Hours Machine in Operation: 49 hours 46 minutes
• Total Hours Machine in Working: 28 hours 31 minutes
• Total Saw Blade Cutting Distance: 571.5 metres
• Total Production Recorded: 129.6 m³
All operating data can be verified directly through the machine’s control system.
TECHNICAL SPECIFICATION
• Manufacturer: Macmazza
• Model: TS90
• Year of manufacture: 2020
• Serial number: 931/20
• Cutting length: 4,300 mm
• Pusher stroke: 4,300 mm
• Maximum cutting height: 90 mm
• Installed power: 15 kW
• Power supply: 400 V, 50 Hz, three-phase + N + PE
• Control voltage: 24 V DC
• Full-load current: 30 A
• Machine weight: 3,500 kg
• Computer-controlled operation
• Integrated cutting optimisation software
• Automatic rear pusher
• Pneumatic grippers
• Scoring unit
• Air-float front supporting tables
• CE marked
ADDITIONAL ORIGINAL MACMAZZA GRIPPER
The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery.
The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available.
CONDITION AND INSPECTION
The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time.
It is currently installed and can be inspected and demonstrated under power by prior appointment.
Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries.
LOCATION AND COLLECTION
Located in Perivale, West London, United Kingdom.
Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser.
PRICE
€39.900 net – negotiable
Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.
Hfjdozzdyzopfx Af Tsp
Success:
Your message has been sent.
Listing
Vrhnika
18,373 km
Laser cutting machine
GOLDEN LASERP2060-3D
Call
Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on.
Main configuration:
Laser source: Raycus 3,000 W fiber laser
Cutting head: 3D 5-axis bevel cutting head with auto focus
CNC control and software: PA (Germany)
Hfsdpfx Ae Afwzwef Top
Nesting software: Lantek (Spain)
Servo motors: Yaskawa (Japan)
Reducers: APEX (Taiwan); gears and rack: alpha (Germany)
Linear guides: HIWIN (Taiwan)
Proportional valve: SMC (Japan)
Main electrical parts: Schneider (France)
Chiller: Tongfei
Automatic bundle loader (load size 800 x 800 x 6,000 mm)
Automatic unloading / collecting device (max. collecting length 3,000 mm)
Pneumatic double chucks with auto-centering
Floating support system and floating rear material support
Weld seam recognition camera (round and rectangular tubes)
Automatic lubrication
Dust extraction unit / air dust dryer 5.5 kW
Technical data:
Tube diameter range: 20–200 mm
Max. tube length: 6,000 mm
Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles
Max. tube weight: 37 kg/m
Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm)
X/Y positioning speed: 95 m/min
X/Y acceleration: 1.5 G
Chuck rotation speed: 160 rpm
Positioning accuracy: ±0.03 mm
Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm
Axis motor power: X 3 kW, Y 2 kW, Z 2 kW
Machine power: 30 kW, 380 V AC, 50/60 Hz
Machine weight: approx. 12 t
Footprint: approx. 12 x 5.5 m
Year of manufacture: 2022
Location: Slovenia
Inspection and test cutting possible by appointment.
Success:
Your message has been sent.
Listing
Ivanja Reka
18,241 km
CNC machine tending FANUC robot cell
Teximp d.o.o.URC-35P
Call
Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information:
Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises.
It consists of:
1) Robot:
Fanuc robot M20iD/35
6-axis vertical robot
Load capacity 35 kg / reach 1831mm
R-30iB Plus controller
A-cabinet
I/O modules; DI32 / DO32
DCS Dual Check Safety Position (J567)
Soft Float (J612)
Touch Skip (J921)
Singularity Avoidance (R792)
User Socket Messaging (R648)
Karel (R632)
2) Loader Table:
Compact but heavy loader table with front entrance.
Table size: 980 x 700 mm
Docking station with four pockets
Three locating pins for quick pallet exchange
ReeR safety light curtain, Cat. 4
Three control buttons
LED status beacon
Electrical cabinet and cables included
3) Pallet Rack
The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets.
Large rack (42 pockets) - included as standard
Second large rack (42 pockets) - optional
4) Vices & Zero-point clamping system
The system is designed for:
- Lang Vices (not included in price)
- Lang Zero-Point clamping system (not included in price)
- Note: it can also be implemented to work with pallets instead of vices (not included in price)
5) Safety Options:
Cage (standard)
ReeR safety light curtains (cat.4) on Loader table (standard)
Plexiglass cover on Racks (standard)
ReeR Mosaic M1 safety controller (standard)
6) Interface to the Haas machines
Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged)
Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication)
Preparing for a Clamping device
Preparing for a PAD
Preparing for an external Air Blow
7) Gripper Configuration
The Teximp Gripper Interface includes everything needed for gripping the vices
Gripper carrier
Schunk Gripper JGP-P 160-2
Stroke per jaw [mm] = 8
Recommended workpiece weight [kg] = 24.5
Hodpo Af Uxxjfx Af Tsfp
Preparation for vice/pallet clamping
Sensors for gripper state detection - clamped/unclamped
Blower nozzle
Laser sensor (for vise presence detection)
8) Automatic Door system
URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include:
a) PAD-HaasUMC-side
b) PAD-HaasVF-side
c) Can be made for other machines (not included in price)
9) Programming Option (HMI)
Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge.
Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise!
- Easy visual programming
- No additional hardware required
Note:
- We provide transport, installation, commissioning and operator training at additional cost.
- You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.
Success:
Your message has been sent.
Listing
Ivanja Reka
18,241 km
CNC machine tending FANUC robot cell
Teximp d.o.o.URC-12
Call
Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information:
Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines.
It consists of:
1) Robot:
- Fanuc robot M-10iD/12
6-axis vertical robot
Load capacity 12 kg / reach 1441mm
R-30iB Plus controller
A-cabinet
I/O modules; DI16 / DO16
DCS Dual Check Safety Position (J567)
Hfjdpfxo Afx Ryj Af Tjp
Soft Float (J612)
Touch Skip (J921)
Singularity Avoidance (R792)
User Socket Messaging (R648)
Karel (R632)
2) Part Table:
Compact but heavy part table with front entrance.
Table size 980 x 700mm
Three pins for quick pallet changing
Reer safety light curtain, cat.4
Control button 3
LED status beacon
Electrical cabinet and cables
3) Safety Options
The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version.
- Cage (Standard)
- Omron Laser (Alternative)
- Reer Light Curtain (Standard)
4) Interface to the Haas machines
Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged)
Communication CNC < = > URC, I/O, M-fin, safety
Preparing for a Clamping device
(2nd clamping device available)
Preparing for a PAD
Preparing for an external Air Blow
5) Gripper Configuration
The Teximp Gripper Interface includes everything needed for clamping parts on the robot side.
- Gripper carrier 90°
Schunk Gripper JGP-P 100-2 (2 pcs)
Stroke per jaw [mm] = 5
Recommended workpiece weight [kg] = 8.75
ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer
Sensors G1/G2 - clamped/unclamped
Blower nozzle
Other possibility:
- Gripper carrier 180°
Schunk Gripper JGZ 100-1 (2 pcs)
Stroke per jaw [mm] = 10
Recommended workpiece weight [kg] = 9
Sensors G1/G2 - clamped/unclamped (4 pcs)
Blower nozzle
6) Automatic Door system
Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines.
PAD-HaasVF-side
PAD-HaasVF-front
PAD-HaasMM-front
PAD-HaasST
PAD-HaasUMC
- PADs for machines without the original side door/window are also available.
7) Programming Option (HMI)
Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime.
- Easy visual programming
- No additional hardware required
Note:
- We provide transport, installation, commissioning and operator training at additional cost.
- You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.
We make it easier for you to find: "floating dredgers"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Floating Dredgers (313)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you









































































































































































































































































































































