Used Cl500 Q for sale (1,966)

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Hsdpfx Asy Tu Txecdon Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 107407,, IN GOOD CONDITION Hedpfx Asyi Uq Iocden

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1991, machine/vehicle number: 105039, excellent condition Hsdpfxjy Tl Umj Acdsn

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) Hodpfeixz Hdox Acdon - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Hsdey Ah H Ropfx Acdsn Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, Leybold A700 Q deposition system (ebeam) Hjdpfsuhcnisx Acdon Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. Hjdpfoyt Nm Ejx Acden The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. Hjdpfxeyt Nhve Acden The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. Hedsyt I U Uspfx Acdon You are always welcome to visit our showroom in Bergeijk for a viewing. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. Hsdpox Uz Ilefx Acdon The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW Hedel Dw D Ejpfx Acden - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Hjdpfx Ajhnc E Ascden Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Hsdelbmm Eepfx Acdon Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Condition: used, Scissor Lift Table, Hydraulic Lifting Machine, Self-Propelled Scissor Lift, Holland Lift HL Q 135 EL 18, Used Machine Manufacturer: Holland Lift Type: HL Q 135 EL 18 Overall dimensions: Hodpoy Uq Smjfx Acdjn Width: 4400 mm Depth: 1800 mm Height: 2980 mm Year of manufacture: 1992 Working height: 15.50 m (Platform height: 13.50 m) Operating weight: 6500 kg High load capacity: 500 kg (approved for 2 persons, also suitable for lifting heavy tools and materials) Operating voltage: 48 V (battery-powered drive system) Extra: Manually extendable platform, allowing the basket length to be extended to more than 6 meters for an even larger working area. The battery provides approximately 1–2 hours of continuous operation.

Condition: new, 12 boxes (24 rolls) of strapping tape, Tewe, 12x0.63mm, length 3000m, core 200, black – used -: Hjdsv T Rwhjpfx Acden Price for complete collection from location: only €1,200 (net)!! Manufacturer: Tewe Type: 12063, 7640 / Q 2242402 Year of manufacture: 2x 3,000m black Diameter: 200mm Condition: New Available: Immediately Location: Braunschweig

Condition: used, functionality: fully functional, machine/vehicle number: 0012, Year of construction: 2005, load capacity: 1,800 kg, lifting height: 5,200 mm, fuel type: electric, mast type: triplex, drive type: Elektro, High-lift order picker Chassis number: 0012 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Hjdpfx Acjy Uptcjdjn Battery type: PzS

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Hodpfxex R A E Re Acden Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Hedpfsx R A E Djx Acdsn Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049  

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Hodpfxew Hbnvs Acdjn Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Condition: ready for operation (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year 2011 Axis travels 1300x600x600 mm Machine weight 8,000 kg Box ways Spindle ISO 40 (DIN 69871) 12,000 rpm Spindle line chiller High-pressure internal spindle coolant BLUM laser tool probe Hodpfx Acsxql Ncedsn 24-position random tool changer Auger chip conveyor CNC HEIDENHAIN 530 Remote electronic handwheel

Condition: ready for operation (used), Heidenhain LE 355 Q control . 238 324 99 SN:2937133 , used, normal signs of wear, 100% functional, scope of delivery as per photos Hedpfji Eam Djx Acden

Condition: used, Q 33.0 m³/h P 15,0 kW max. 20 bar max. 110 C° Hodpoikwapofx Acden H 90.0 m Nr. 4932869340 232 kg

Condition: used, machine/vehicle number: 008347, Max. panel width: 1200 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 50 Kg Work capacity: 18 Cycles/min Movement system: suction cups. Hodpfxeyngzpo Acdsn

Condition: new, Year of construction: 2026, machine/vehicle number: J25I814558, fuel type: diesel, motor manufacturer: Cummins QSL9-G7, General information Field of application: Construction Weights Empty weight: 3.400 kg Hsdsv N Tlaopfx Acdon Functional Generator capacity: 330 kVA Dimensions of cargo space: 402 x 140 x 250 cm CE mark: yes Other information Fuel consumption: 59 Liter per Hour at 75% Load Generator: Stamford HC444D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 44 kW (59.82 HP), motor manufacturer: Cummins 4BTAA3.3-G14, General information Field of application: Construction Weights Empty weight: 1.263 kg Functional Generator capacity: 55 kVA Dimensions of cargo space: 232 x 102 x 169 cm CE mark: yes Other information Fuel consumption: 10.2 Liter per Hour at 75% Load Generator: Stamford UC224D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage IIIA / Tier III Water tank volume: 200 l Hodpfxov Hk Ers Acdon Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank