Used Dgs for sale (151)

Condition: used, Direct current, gear motor Tjded Evukspfx Af Tjf -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-250005, Kaltenbach KBS 851 DG Miter Band Saw Tsdpfxjwlz Iys Af Tjf The Kaltenbach KBS 851 is a powerful double-edged miter band saw for precise and efficient cuts in steel profiles, pipes, and solid material. This miter band saw, equipped with the Kaltenbach T13 transport system, is ideal for use in steel trading or steel construction. The machine is in very good used condition and has been regularly serviced by Kaltenbach.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. Todpsilg Hdofx Af Tsf - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Tedpfx Asu Eug Ief Tof With lots of accessories.

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm Tedefdgi Hepfx Af Tjf saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: DG-60-B 95174, type of input current: AC, punching force: 400 t, machine base height: 2,400 mm, input voltage: 380 V, input frequency: 50 Hz, Iberica DG-60-B Flatbed Die Cutting Machine Size: (250 x 450) - (860 x 1.140) mm Weight: 19.000 kg Power Req.: 380 V / 50 Hz Installed power: 13,5 kW Used space: 9.800 x 3.700 x 2.400 mm Tedpfx Afowwtn Ae Tjf Status: mnf. 1995 Machine has stripping station, for clean product pallet delivery Pressing force : 400 tons Working speed : up to 5.000 sheets / hour Cardboard thickness : up to1,5 mm Corrugated cardboard thickness : up to 5 mm Gripper margin 8-15 mm, standard 10 mm Stroke of stamping plate 55 mm, Suitable for cardboard and corrugated cardboard type : E, B, C, EB, EE, BE Machine in printing house, under power, test is possible Located: Europe Eastern Current State: Under power Available: 07-2025

Condition: used, Direct current, gear motor -Power: 3 kW -DC motor: Manufacturer Baumuller type DSG Tsdpfx Afsd Evu So Tef -Speed: 6000 rpm -Gearbox: manufacturer Nord type 2282AZ-IEC 80 -Translation: 1: 11.81 -Hollow shaft diameter: 35 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Condition: excellent (used), functionality: fully functional, Edge, disc grinder 2-in-1 SAMCO DG-60 Specifications: - manufacturer - SAMCO - model - DG-60 - working height - 150 mm - paper size - 150 x 1870 mm - worktop with dimensions of 35 x 64 cm - motor power - 2.2 kW - mechanical belt tensioning and oscillation - the machine does not need pneumatics - diameter of the abrasive plate - 600 mm - table top adjustable in angle +- 45 degrees - extraction stubs fi 120 mm - safety switches and CE markings - weight - approx. 400 kg - overall dimensions 110 x 120 x 130 cm ( l. x w. x h. ) Additional information: Tsdpfevgnagox Af Tjf - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and shipping costs

Condition: excellent (used), Year of construction: 2015, AUTOMATIC TWO-HEAD SAW ELUMATEC DG 244 + E580 -5 YEAR 2015 Tjdowltqaspfx Af Tsf

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. Tjdpfxehkhumo Af Tjf -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: new, Metallkraft BMBS 360 x 500 HA-DG Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. Description: -Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. -Designed for industrial use -For sawing e.g. stainless steel, tool steel, hollow sections and solid materials -Saw band drive with low-maintenance, oil-lubricated worm gear -With robust three-phase motor with overload protection -Saw band guide with adjustable carbide plates -With mechanical saw band tensioning and monitoring by microswitch -Cooling system on the saw band guides -With frequency converter as standard for infinitely variable adjustment of the saw band speed from 20 - 100 m/min. -With BRP saw band monitoring as standard Technical data: Motor power 2.0 kW Speed steps stepless saw band speeds 20 ? 100 m/min saw band dimensions 4780 x 34 x 1,1 mm Footprint (LxWxH) 2900 x 950 x 2270 mm Tedpfx Afocgz E Ts Tof Table height material feed 820 mm cutting angle 650 kg Cutting range 360 mm Cutting range 0° round tube material 250 mm Cutting range 0° round tube solid material 500 x 360 mm Cutting range 0° - rectangle lying 500 x 360 mm Cutting range 0° - rectangle standing 350 mm Cutting range +45° - round tube material 180 mm Cutting range +45° round tube solid material 400 x 180 mm Cutting range +45° - rectangle lying 350 x 360 mm Cutting range +45° - rectangle standing 310 mm Cutting range -60° - round tube material 130 mm Cutting range -60° round tube solid material 310 x 170 mm Cutting range -60° - rectangle lying 200 x 360 mm Cutting range -60° - rectangle standing 360 mm Cutting range -45° - round tube material 180 mm Cutting range -45° round tube solid material 400 x 190 mm Cutting range -45° - rectangle lying 330 x 360 mm Cutting range -45° - rectangle standing 270 mm Cutting range +60° - round tube material 130 mm Cutting range +60° round tube solid material 270 x 320 mm Cutting range +60° - rectangle lying 240 x 360 mm Cutting range bundle - round tube solid material 500 x 220 mm

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm Tedpfx Ash E Izfef Tsf - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, Year of construction: 2000, Working width .- mm With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Todpfxevwfl Uj Af Tef

Condition: new, Year of construction: 2025, Mini wheeled crane BEFARD DG 620 and DG 820 with electric drive for transporting injection molds, casting molds and other heavy loads in tight spaces. The electric drive allows work inside halls and production rooms. Range up to 3.75 m / 4.7 m / 5.5 m Standard equipment DG820.3 • remote control of work • three hydraulic extensions with a maximum vertical range of 5.5 m • battery power supply • two operating modes - fast and slow Additional, optional equipment • Anti-overload system • Sensor for correctly spread support feet • Head with hydraulic rotation and manual tilt • 500 kg hydraulic winch • LED work lighting Available in the selected color. Tjdpfev I Uz Tox Af Tof

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, feed length Y-axis: 60 mm, ram adjustment: 80 mm, pressing force: 50 t, stroke length: 60 mm, overall weight: 4,500 kg, Haulick RV 50 Todpfjwiu Dpox Af Tef Year of production 1974 Nominal force at medium speed and medium stroke of approx. 30 dg before UT in continuous stroke - 50 Mp speed range 1/min - 60-360 Ram stroke - 60 mm Stroke adjustment - 80 mm Bore fi 40 mm Weight 4500 kg The press is from closed stamping plant located in Poland,. Still connected to the power supply. Possibility to check the machine in operation. The press are in very good condition

Year of construction: 2025, condition: new, machine/vehicle number: 073108206Z, We offer new hydropneumatical unit for machines elumatec DG 79, MGS 73 and SA 73. Never used. Original elumatec spare part. number: 073108206Z We can send it to your address. Tedpewhdy Rofx Af Tef

Condition: new, DEMAG Spare Parts: 1. Gear Limit Switch DGS 4 – 2 pcs 2. Transmitter / PCB DRC - DR D3 3. Load Measuring Pin DMR 20 4. CAN Safety Transceiver 5. Brake Ring / Conical KB 160 B – 2 pcs 6. Brake Ring / Conical KB 100 B – 4 pcs 7. Right Rope Guide, 1-groove, P 200/15 8. Brake Unit KDF 63 – 2 pcs 9. Wear Set B050 10. Clutch Set 11. Brake Disc 13KF – 3 pcs 12. Lifting Eye DK 20 – 2 pcs 13. Torque Support Set MA 125-1 – 2 pcs 14. Magnet Body for Brake B140 – 1 pc + B050 – 2 pcs 15. Wire Rope, Diameter 16 mm – 35 meters Tjdpswug Nujfx Af Tjf 16. Wire Rope, Diameter 10 mm – 62.8 meters 17. Gear Limit Switch DGS 3

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-2512-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 1050.0 kg - Maximum load: 1750.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Tjdpfx Ajrp A Ukef Tsf Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, machine/vehicle number: 26065, Year of construction: 2019, operating hours: 4,323 h, load capacity: 1,400 kg, lifting height: 1,612 mm, free lift: 1,529 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, .: 26065 Device Details: Year of Manufacture: 2019 Load Capacity: 1400 kg Lift Height: 1612 mm Read Operating Hours: 4323 h Free Lift: 1529 mm Mast Type: Duplex Mast Height: 2060 mm Length/Width/Height: 2500 / 800 / 1230 mm Operating Weight: 1291 kg Battery from: 2020 ---- Equipment: * Initial lift * Full free lift * DGS made of plexiglass ---- Further Device Information: Double-stack load capacity: 1400/2000kg---- The operating hours are generally read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to seeing you! We speak English Tsdpjwputwjfx Af Tof Interim sales and errors for this offer are expressly reserved. In dealer transactions, the device is sold as is, not refurbished. All information is provided without guarantee, errors and changes reserved.

Condition: new, Year of construction: 2025, 2-column guided band saw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP no. 0491120) Particularly suitable for universal use with different cross-sections cross-sections, materials and frequently changing miter cuts. Center of rotation remains unchanged at every angle setting, thus exact length measurement at 90° and in the miter area. MEBA Eco-Saw-Innovation 2000 The universally applicable MEBA 335 DG mitre band sawing machine is ergonomically perfected and has an optimum price-performance ratio. Simple central operation. The machine control system complies with CE standard 89/289 Technical data: Cutting range: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit - Saw band 3 kW ; 400 V, 50 Hz - Hydraulics 0.55kW - Coolant pump 0.11kW Saw frame feed: infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without set-up elements) Weight: 1320 kg Todot Dpw Rjpfx Af Tef Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Subject to technical changes. Basic equipment of the MEBA 335 DG-500 Semi-automatic sawing sequence with workpiece clamping-sawing-up to set height after cutting is complete MEBA high-performance package: Infinitely variable hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital reading with 0.1° accuracy Rapid traverse lowering of the saw frame via pushbutton up to the material edge Patented double mitre system (ERP no. 0491120) Unique double mitre bandsaw with which mitres on both sides can be set simply and economically by swivelling the saw frame and the material support. Automatic movement of the clamping vices and digital miter adjustment The material clamping vise moves automatically in the direction of flow according to the desired miter, so the material is always clamped at right angles, close to the saw band. The mitre pivot point is the intersection point between the saw blade and the fixed clamping jaw, which means that the length dimension does not change when the angle position changes. Hydraulic full-stroke workpiece clamping. Quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Stable two-column linear saw frame Saw blade set at a 3° angle to the material support surface. Central machine operation Saw frame clearance height adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Rotating chip cleaning brush Saw blade tension with torque wrench Operating instructions and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 900.0 kg - Maximum load: 1120.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Tedsthi Amopfx Af Tof Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, machine/vehicle number: 26111, Year of construction: 2016, operating hours: 3,360 h, load capacity: 1,400 kg, lifting height: 4,300 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, .: 26111 Device details: Year of construction: 2016 Load capacity: 1400 kg Lifting height: 4300 mm Read operating hours: 3360 h Free lift: 1400 mm Mast type: Triplex Mast height: 1930 mm Length/Width/Height: 2500 / 800 / 2220 mm Operating weight: 1585 kg ---- Equipment: * Full free lift * DGS made of plexiglass ---- Further device information: ---- For operating hours, these are generally the read hours. Todpfxewpuryj Af Tef We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to your call! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 25238, Year of construction: 2016, operating hours: 3,676 h, load capacity: 2,000 kg, lifting height: 4,026 mm, free lift: 1,315 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, .: 25238 Device Details: Year of manufacture: 2016 Load capacity: 2000 kg Lifting height: 4026 mm Read operating hours: 3676 h Free lift: 1315 mm Mast type: Triplex Mast height: 1915 mm Length/Width/Height: 2150 / 805 / 1230 mm Operating weight: 1588 kg Battery from: 2016 ---- Features: * Full free lift * DGS made of plexiglass ---- Tedpfxetw A Tyo Af Tjf Further Device Information: ---- The operating hours are generally read-off hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We will gladly buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to seeing you! We speak English. Interim sale and errors for this offer are expressly reserved. In the dealer business, the device is sold in its AS-IS condition, not reconditioned. All details without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 4666, Year of construction: 2011, operating hours: 4,502 h, load capacity: 1,600 kg, lifting height: 1,844 mm, free lift: 879 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, .: 4666 Device Details: Year of manufacture: 2011 Load capacity: 1600 kg Lifting height: 1844 mm Indicated operating hours: 4502 h Free lift: 879 mm Mast type: Duplex Mast height: 1415 mm Length/Width/Height: 2010 / 800 / 1200 mm Operating weight: 1200 kg ---- Equipment: * Initial lift * DGS made of plexiglass ---- Additional Device Information: Battery very poor Operating hours according to the meter ---- The operating hours are generally read values. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are available immediately for you. Of course, also for rent! We are happy to buy your OLD ONE. Do you have any questions? During our business hours from 7:30 am to 4:00 pm, you can reach us. We look forward to seeing you! We speak English Interim sale and errors in this offer are expressly reserved. Tedpfxetw Adls Af Tsf In the dealer business, the device is sold as is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 6707, Year of construction: 2000, operating hours: 4,383 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, .: 6707 Device details: Year of manufacture: 2000 Load capacity: 1600 kg Lifting height: 3300 mm Read operating hours: 4383 h Free lift: 1630 mm Mast type: Duplex Mast height: 2100 mm Length/Width/Height: 1950 / 800 / 1200 mm Operating weight: 1215 kg Battery from: 2008 ---- Equipment: * Full free lift * DGS made of metal ---- Further device information: Battery heavily oxidized Noisy when lowering. Drive motor makes noises. ---- Operating hours are generally read hours. We are happy to offer you suitable transport. An additional 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Tjdpfx Afetw Ah Re Tsf Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. The device is sold in its AS-IS condition, not refurbished, in dealer business. All information without guarantee, errors and changes reserved.