Used Dgs for sale (164)

Condition: used, mileage: 740,000 km, power: 290 kW (394.29 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Sold without silo compressor and only with PTO (power take-off). DG Intercooler. German vehicle. Ncsdsxll Tkspfx Ad Nol

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- Ncodsfgyh Hepfx Ad Nsl The machine is delivered fully assembled and ready for immediate use.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure Nsdpfofg E Hlox Ad Necl controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min Ncedpshpktvsfx Ad Nel total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material Nedpfxjd Iipmj Ad Njcl 6. Vice opens

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Nedpfx Adexd Au Aj Nocl

Condition: used, grinding diameter 250 mm grinding length 600 mm centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° longitudinal feed of the table 700 mm table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Überholt nach Kellenberger Richtlinie inklusive neuer, moderner sowie zukunftssicherer Steuerung. Foto von bereits gelieferter Maschine. -Die Bedienung über das Touch-Panel ist denkbar einfach. -Die Symbolik auf der Steuertafel ist praktisch identisch mit der ursprünglichen Steuerung somit entfällt die Einarbeitung. -Diagnosefunktion mit Anzeige von SPS Hinweisen und den digitalen I/O -Abrichtfunktion auf Kundenwunsch erweiterbar bzw. änderbar. -Auf Wunsch orientierter Spindelhalt der Werkstückspindel möglich. -Neuer Maximaler Zustellbetrag 40mm auf Wunsch noch erweiterbar. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Nedpfxjd Ih Eho Ad Nocl Inklusive: -Neuer DGS Papierbandfilter -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Maschine verfügt in der x-Achse über ein elektronisch gesteuertes Zustellsystem mit Schrittmotorantrieb. Hydraulische Tischlängs- und Eilgangbewegung. Vielseitige Einsatzmöglichkeit in der Produktion beim Aussenrund- und Innenschleifen oder für das Aussen-, Plan- und Innenschleifen in einer Aufspannung von Einzelteilen. Mögliche Optionen: -Halbautomatische Abrichtzyklen für das Aussen- und Innenschleifen -automatischer Abrichtkompensation. -Messsteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; Ncjdpsucl Dcsfx Ad Njl *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically Nodpfjilg Hdox Ad Njcl after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Ncodofdgi Hepfx Ad Nol Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: DG-60-B 95174, type of input current: AC, punching force: 400 t, machine base height: 2,400 mm, input voltage: 380 V, input frequency: 50 Hz, Iberica DG-60-B Flatbed Die Cutting Machine Size: (250 x 450) - (860 x 1.140) mm Weight: 19.000 kg Power Req.: 380 V / 50 Hz Installed power: 13,5 kW Used space: 9.800 x 3.700 x 2.400 mm Status: mnf. 1995 Machine has stripping station, for clean product pallet delivery Ncedswwtn Aopfx Ad Nel Pressing force : 400 tons Working speed : up to 5.000 sheets / hour Cardboard thickness : up to1,5 mm Corrugated cardboard thickness : up to 5 mm Gripper margin 8-15 mm, standard 10 mm Stroke of stamping plate 55 mm, Suitable for cardboard and corrugated cardboard type : E, B, C, EB, EE, BE Machine in printing house, under power, test is possible Located: Europe Eastern Current State: Under power Available: 07-2025

Condition: excellent (used), functionality: fully functional, Edge, disc grinder 2-in-1 SAMCO DG-60 Specifications: - manufacturer - SAMCO - model - DG-60 - working height - 150 mm - paper size - 150 x 1870 mm - worktop with dimensions of 35 x 64 cm - motor power - 2.2 kW - mechanical belt tensioning and oscillation - the machine does not need pneumatics Nedpevgnagjfx Ad Necl - diameter of the abrasive plate - 600 mm - table top adjustable in angle +- 45 degrees - extraction stubs fi 120 mm - safety switches and CE markings - weight - approx. 400 kg - overall dimensions 110 x 120 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and shipping costs

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Ncedpswn H Auefx Ad Njl Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Ncjdpfxohkhume Ad Njl Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: used, machine/vehicle number: 6707, Year of construction: 2000, operating hours: 4,383 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, .: 6707 Device details: Year of manufacture: 2000 Load capacity: 1600 kg Lifting height: 3300 mm Read operating hours: 4383 h Free lift: 1630 mm Mast type: Duplex Mast height: 2100 mm Length/Width/Height: 1950 / 800 / 1200 mm Operating weight: 1215 kg Battery from: 2008 ---- Equipment: * Full free lift * DGS made of metal ---- Further device information: Battery heavily oxidized Noisy when lowering. Drive motor makes noises. ---- Operating hours are generally read hours. Ncedpetw Ah Rofx Ad Njl We are happy to offer you suitable transport. An additional 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. The device is sold in its AS-IS condition, not refurbished, in dealer business. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 25425, Year of construction: 2007, operating hours: 8,802 h, load capacity: 1,400 kg, lifting height: 4,740 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, .: 25425 Device details: Year of manufacture: 2007 Load capacity: 1400 kg Lifting height: 4740 mm Read operating hours: 8802 h Free lift: 1550 mm Mast type: Triplex Mast height: 2060 mm Length/Width/Height: 2170 / 800 / 1300 mm Nodpstw Dazsfx Ad Nocl Operating weight: 1600 kg Battery from: 2016 ---- Equipment: * Initial lift * Full free lift * DGS made of metal ---- Additional device information: ---- The operating hours are generally read off the display. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to seeing you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer transactions, the device is sold as is, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 26111, Year of construction: 2016, operating hours: 3,360 h, load capacity: 1,400 kg, lifting height: 4,300 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, .: 26111 Device details: Year of construction: 2016 Load capacity: 1400 kg Lifting height: 4300 mm Read operating hours: 3360 h Free lift: 1400 mm Mast type: Triplex Mast height: 1930 mm Length/Width/Height: 2500 / 800 / 2220 mm Operating weight: 1585 kg ---- Equipment: * Full free lift * DGS made of plexiglass ---- Further device information: ---- For operating hours, these are generally the read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to your call! We speak English Ncsdpowpuryofx Ad Nsl Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 26065, Year of construction: 2019, operating hours: 4,323 h, load capacity: 1,400 kg, lifting height: 1,612 mm, free lift: 1,529 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, .: 26065 Device Details: Year of Manufacture: 2019 Load Capacity: 1400 kg Lift Height: 1612 mm Read Operating Hours: 4323 h Free Lift: 1529 mm Mast Type: Duplex Mast Height: 2060 mm Nodpfswputwjx Ad Njcl Length/Width/Height: 2500 / 800 / 1230 mm Operating Weight: 1291 kg Battery from: 2020 ---- Equipment: * Initial lift * Full free lift * DGS made of plexiglass ---- Further Device Information: Double-stack load capacity: 1400/2000kg---- The operating hours are generally read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to seeing you! We speak English Interim sales and errors for this offer are expressly reserved. In dealer transactions, the device is sold as is, not refurbished. All information is provided without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 4666, Year of construction: 2011, operating hours: 4,502 h, load capacity: 1,600 kg, lifting height: 1,844 mm, free lift: 879 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, .: 4666 Device Details: Year of manufacture: 2011 Load capacity: 1600 kg Lifting height: 1844 mm Indicated operating hours: 4502 h Free lift: 879 mm Mast type: Duplex Mast height: 1415 mm Length/Width/Height: 2010 / 800 / 1200 mm Operating weight: 1200 kg ---- Equipment: * Initial lift * DGS made of plexiglass ---- Additional Device Information: Battery very poor Operating hours according to the meter ---- The operating hours are generally read values. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are available immediately for you. Of course, also for rent! We are happy to buy your OLD ONE. Do you have any questions? During our business hours from 7:30 am to 4:00 pm, you can reach us. We look forward to seeing you! Ncsdpfotw Adlox Ad Njl We speak English Interim sale and errors in this offer are expressly reserved. In the dealer business, the device is sold as is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 5002, Year of construction: 2011, operating hours: 10,103 h, load capacity: 1,400 kg, lifting height: 2,000 mm, free lift: 1,020 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, .: 5002 Device details: Year of construction : 2011 Ncsdpfx Adevkfale Nol Lifting capacity : 1400 kg Lifting height : 2000 mm Read operating hours : 10103 h Free lift : 1020 mm Mast type : Duplex Mast height : 1400 mm Length/width/height : 1870 / 800 / 1200 mm Operating weight : 1293 kg Battery from :2011 ---- Equipment: * DGS made of Plexiglas ---- Further device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We will gladly buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Nodpsvzp Uzefx Ad Njcl Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: used, machine/vehicle number: 6677, Year of construction: 2012, operating hours: 2,622 h, load capacity: 1,400 kg, lifting height: 2,480 mm, fuel type: electric, mast type: simplex, construction height: 1,660 mm, .: 6677 Device details: Year of manufacture: 2012 Ncedpfjtw Ah Djx Ad Nol Load capacity: 1400 kg Lifting height: 2480 mm Read operating hours: 2622 h Mast type: Standard Mast height: 1660 mm Length/Width/Height: 2000 / 800 / 1200 mm Operating weight: 1288 kg Battery from: 2012 ---- Equipment: * DGS made of Plexiglas ---- Further device information: ---- Operating hours are generally read hours. We are happy to offer you suitable transport. An additional 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. The device is sold in its AS-IS condition, not refurbished, in dealer business. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 9009, Year of construction: 2007, operating hours: 306 h, load capacity: 1,050 kg, lifting height: 2,900 mm, fuel type: electric, mast type: simplex, construction height: 2,000 mm, .: 9009 Device details: Year of manufacture: 2007 Load capacity: 1050 kg Lifting height: 2900 mm Read operating hours: 306 h Mast type: Standard Mast height: 2000 mm Length/Width/Height: 1900 / 785 / 1240 mm Operating weight: 912 kg ---- Equipment: * DGS made of metal ---- Further device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transport. Ncedpfx Adetw Amms Nsl Another 250 - 300 forklifts, attachments, and sweepers available immediately for you. Also available for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. In dealer business, the device is sold as-is, not refurbished. All information is without guarantee, errors and changes reserved.

Condition: new, machine/vehicle number: 25863, Year of construction: 2024, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 2,000 mm, fuel type: electric, mast type: simplex, construction height: 1,580 mm, .: 25863 Device details: Year of construction : 2024 Lifting capacity : 1200 kg Lifting height : 2000 mm Read operating hours : 1 h Mast type : Standard Mast height : 1580 mm Length/width/height : 1830 / 800 / 1310 mm Operating weight : 720 kg ---- Equipment: * Initial lift * DGS made of Plexi ---- Further device information: ---- The operating hours are generally read hours. We are happy to offer you suitable transportation. Ncsdpfx Aeu Hf U Ssd Nel Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We will gladly buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: new, DEMAG Spare Parts: 1. Gear Limit Switch DGS 4 – 2 pcs 2. Transmitter / PCB DRC - DR D3 3. Load Measuring Pin DMR 20 Ncodpfx Adowug Nuj Nel 4. CAN Safety Transceiver 5. Brake Ring / Conical KB 160 B – 2 pcs 6. Brake Ring / Conical KB 100 B – 4 pcs 7. Right Rope Guide, 1-groove, P 200/15 8. Brake Unit KDF 63 – 2 pcs 9. Wear Set B050 10. Clutch Set 11. Brake Disc 13KF – 3 pcs 12. Lifting Eye DK 20 – 2 pcs 13. Torque Support Set MA 125-1 – 2 pcs 14. Magnet Body for Brake B140 – 1 pc + B050 – 2 pcs 15. Wire Rope, Diameter 16 mm – 35 meters 16. Wire Rope, Diameter 10 mm – 62.8 meters 17. Gear Limit Switch DGS 3