Used Dgs for sale (152)

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for intimidate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses. Gedpoxxz N Uofx Ahvotw

Condition: used, This listing is for a Grifols DG Therm Incubator The DG Therm is a digital incubator designed for efficient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin. Gsdpfxsxxwapj Ahvjtw

Condition: excellent (used), Model: DGS 180 Godpfx Ahjgh Hl Eovotw Saw angle in two planes (vertical and horizontal). Very good condition.

Condition: good (used), Double mitre saw Manufacturer: Haffner Gedpfx Asx Hgu Ishvstw Model: DGS 180 Year of manufacture: N.A., approx. 1990 Cutting length: 3,400 mm Saw blade diameter: 330 mm Power: 2 x 1.1 kW Speed: 2,800 rpm Tilting: 45°, 90° Swivelling: -45°, 90°, +45°

Condition: used, Year of construction: 1996, - Connected load (kW): 2 - Control voltage (V): 24 - Supply voltage (V); 400 - Compressed air supply (bar): 7 - Saw blade diameter (mm): 300 - Sawing width max. (mm): 150 - Sawing height max. (mm): 100 - Stop table length (mm): 4000 - Outfeed table length (mm): 2500 - swivelling: via control Gtedpfjbazzpox Ahvow

Condition: used, 0 4000,5000 mm Gtsdoxmk Amepfx Ahvow Working height 120 mm 0 ja

Condition: good (used), Technical Data: Parameter Value Saw blade diameter 330 mm Cutting capacity (at 90°) 165 x 115 mm Cutting capacity (at 45°) 115 x 115 mm Gtodpfx Asxvmqxshvjw Swivel range (angles) 0° to 45° Cutting length (min./max.) min. 350 mm / max. 3000 mm Motor power 2 x 2.5 HP (approx. 1.8 kW) Power supply 380 V, 50 Hz Operating pressure 6 bar Weight 615 kg Technical Condition: Used machine, technically fully functional, with signs of use appropriate for its age (year of manufacture: 1977). Please contact me to arrange viewing and testing of the machine. Collection in person or transport possible upon agreement.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Gtedpfx Aod N Rb Dohvow Drilling front heads on each side included Very good condition. Available immediately.

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Empty weight: 490 kg Top speed: 24 km/h Serial number: L4MCUCM47PA000041 Gtsdpfx Ahetr Tazjvew Transport dimensions (LxWxH): 2.43x1.16x1.8 Please contact PFEIFER GROUP for more information

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Empty weight: 490 kg Top speed: 24 km/h Serial number: L4MCUCM46PA000046 Gtedjtr Tbqjpfx Ahvow Transport dimensions (LxWxH): 2.43x1.16x1.8 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Double mitre saw from Haffner, type 189, immediately available. Technical data: Saw blade diameter 330 mm, max saws distance at 90°: 3,330 mm, cutting height at 90°: 90 mm, cutting width: 220 mm, cutting height at 45°: 40 mm, min saws distance at 90°: 360 mm. Saw blades tiltable up to 45°, intermediate support, saw units swiveling, saw blades tiltable, pneumatic clamps, top-cutting design, manual width adjustment. Weight approx. 380 kg. Required space: length 1.2 m, width 3.8 m. The machine is in excellent technical condition and can be inspected at any time. Nationwide delivery by freight forwarder possible. For questions, simply call or write. Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg. All prices net plus VAT – subject to errors. Gsdpfxjxk Tvko Ahvotw

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) Gtsdpfx Asupxupohvew • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic Gtodpfx Aofgyicehvow · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Operating hours: 100 h, condition: used, functionality: fully functional, Heavy-duty granulator. Rotor width 1200 mm, rotor diameter 660 mm, with 5 rows of knives, one with a V-cut blade, 3 counter knives, one of which serves as a deflector, which can also be removed. Hopper and screen basket open hydraulically. Weight approx. 7700 kg. Gtedpfx Aev Iqrnjhvsw Machine has only been in operation for approximately 100 hours. No wear. Optionally available with feed conveyor belt or suction system.

Year of construction: 2025, operating hours: 2 h, condition: like new (used), functionality: fully functional, DG 2660 E granulator, 15 kW, rotor width 600 mm, rotor diameter 260 mm, 3 rows of knives, V-cut, 2 rows of counter knives. With soundproof enclosure. Showroom machine, as good as new. Gtsdpfx Ahov Iqyxovow

Condition: good (used), Year of construction: 1997, Double mitre saw RAPID DGS 200 year of construction 1997 drive 2 x 2,2 KW, 400 V swivelling range manual 45° to 90 Saw blade 420 mm Ø Saw feed pneumatic cutting length 4000 mm Profile clamping 2 pcs. horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment manual Length display digital Air pressure 7 bar Profile support fixed outside and movable in the middle dimension L/W/H 5200/1200/1500 mm Gtjdpfx Aohctt Ejhvjw Weight 800 kg

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS Gtsdpfsw Rrxfjx Ahvsw

Year of construction: 2012, condition: ready for operation (used), A Schüco double miter saw for aluminum profiles is available. Saw units: 2, max. cutting length: 6000mm, saw blade diameter: 500mm, bore: 32mm, max. miter angle: 22.5°, fixed stops: 90°/45°/22.5°, min. cutting length: 300mm. Machine dimensions X/Y/Z: approx. 7500mm/1800mm/2000mm, weight: approx. 2200kg. Documentation available. An on site inspection is possible. Gjdpfx Ahsyh Nv Tsvjtw

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 Godpou Nm Niofx Ahvjtw - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece Gtodpfoxwvh Asx Ahvew -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc. Gtsdpfxoxw Tc Rs Ahvsw

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg Gtedpfxoxwlfwe Ahvow

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-80-PA 543966 Gsdpfx Ahjx Iftlsvotw -Stroke: 80 mm -Quantity: 1x sled available -Dimensions: 200/60/H35 mm -Weight: 1.1 kg

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Gtodpsxv D Dcofx Ahvew Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: new, Festo DGSL-12-50-Y3A Mini slide 543979 ,unused in sealed original box, 100% functional, scope of delivery according to photos Gtjdpfei D U Iuox Ahvjw