Used Dgs for sale (183)

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-32704 + Stegmann DG 1604 2500 pulses/rev rotary encoder, serial number: 330003657, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Djdpsi D In Tsfx Al Aowc

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm Djdpfx Alst Dpw Re Aowc 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch Dwsdozkqizspfx Al Asc -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

Condition: new, machine/vehicle number: 9035, Year of construction: 2024, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 2,000 mm, fuel type: electric, mast type: simplex, construction height: 1,545 mm, .: 9035 Device details: Year of manufacture: 2024 Lifting capacity: 1200 kg Lifting height: 2000 mm Read operating hours: 1 h Mast type: Standard Mast height: 1545 mm Length/Width/Height: 1800 / 800 / 1220 mm Operating weight: 744 kg ---- Equipment: * Full free lift * Plexiglas DGS ---- Further device information: Other lifting heights available on request ---- The operating hours listed generally refer to the hours read off the device. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Dwedpfx Aotw Ahksl Aoc Of course, also for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Interim sales and errors for this offer are explicitly reserved. In dealer business, the device is sold in AS-IS condition, not refurbished. All information without guarantee, errors and changes reserved.

Condition: new, machine/vehicle number: 9137, Year of construction: 2024, operating hours: 1 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, .: 9137 Device details: Year of manufacture: 2024 Dwsdpfetw Atmex Al Asc Load capacity: 1000 kg Lifting height: 2700 mm Read operating hours: 1 h Mast type: Standard Mast height: 1940 mm Length/Width/Height: 1800 / 770 / 1320 mm Operating weight: 758 kg Battery from: 2021 ---- Equipment: * Initial lift * DGS made of metal ---- Further device information: ---- Operating hours are generally the read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 am to 4:00 pm, you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold in AS-IS condition, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Dwjdpfx Alsd Hzbwe Asc Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Baumüller DSG 100-K servo motor, serial number: 20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Dwjdpfei D E Dvsx Al Asc

Condition: good (used), Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG BM 59834544 -Impeller diameter: 225 mm Djdpfx Aozhuhiel Aowc -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm -Weight: 8.5 kg

Condition: new, Year of construction: 2026, Mini wheeled crane BEFARD DG 620 and DG 820 with electric drive for transporting injection molds, casting molds and other heavy loads in tight spaces. Dodpfx Asv I Uz Tel Ajwc The electric drive allows work inside halls and production rooms. Range up to 3.75 m / 4.7 m / 5.5 m Standard equipment DG820.3 • remote control of work • three hydraulic extensions with a maximum vertical range of 5.5 m • battery power supply • two operating modes - fast and slow Additional, optional equipment • Anti-overload system • Sensor for correctly spread support feet • Head with hydraulic rotation and manual tilt • 500 kg hydraulic winch • LED work lighting Available in the selected color.

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Dsdpfezi Sglox Al Aswc -Manufacturer: ismet, transformer -Type: DG -Item No.: 603133 -Power: 960 VA -Voltage: 380V / 24V -Technical data: see photo of the nameplate -Dimensions: 240/210/H225 mm -Weight: 15.4 kg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm Dodpfx Aljhpktvo Ajwc band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Dodpoxg Hanofx Al Aowc Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice Dsdpfofg E Hlox Al Aowc • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, speed encoder, incremental encoder -Manufacturer: Contact, speed sensor -Type: Dg 122.1 -No.: 401849/ 4 Dwsdsq Av U Tepfx Al Aoc -Connection: 1 2 = 20 VAC/1000 rpm -Max: 10000 rpm -Shaft: Ø 10 x 28 mm -Quantity: 1x available -Dimension: 143/100/H100 mm -Weight: 0.8 kg

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping, sawing, and lifting to the set height after the cut is completed. Stepless hydraulic control of cutting pressure and feed rate on the back of the saw blade. This ensures optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed rate for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials, and frequently changing miter cuts. The machine control complies with CE standard 89/289. Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 This model can also be supplied with double miter capability as model 320 DG! Rapid lowering of the saw frame via push button to the material edge. Manual miter adjustment from 90° to 30°, stepless according to scale. The miter pivot point is the intersection between the saw blade and the fixed clamping jaw, thus no change in the length dimension when changing the angle. Hydraulic full-stroke workpiece clamping - CETOP hydraulic system. At every angle of the saw frame, the material is clamped parallel at 90°. Complete coolant system with electric submersible pump. Central machine operation. Saw blade drive with end-of-travel shut-off. Movable blade guide arm, adjustable to material width. Saw blade deflector rollers with carbide guide. Chip-cleaning brush, rotating with the blade. Saw blade tension with torque wrench. Paint finish: silver gray / blue gray (RAL 7001 / RAL 7031). Remaining piece length: 25mm. Cutting speed: AC frequency-controlled drive, 15-150 m/min, steplessly adjustable at the control panel. Drive: Saw blade 3.0kW; 400V, 50Hz. Hydraulics 1.1kW. Coolant pump 0.1kW. Saw frame feed: Stepless up to 300mm/min, hydraulically controlled. Saw blade tension: Mechanical with torque wrench. Saw blade dimensions: 4200x34x1.1mm. Working height: 750mm (without mounting elements). Dwodpfxohppabo Al Aec Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spray device Clamping pressure regulator Support table on the feed side.

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Dwsdpfx Ast Rbhzsl Ajc -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW Dwedod Iipmjpfx Al Aec weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: good (used), DC, geared motor Dodpfx Aled Evu So Aewc -Power: 3 kW -DC motor: Manufacturer Baumüller, type DSG -Speed: 6000 rpm -Transmission: Manufacturer Nord Type 2282AZ-IEC 80 -Translation: 1:11,81 -Hollow shaft diameter: 35 mm -Speedometer: Manufacturer Stegmann Type DG 60L XSR 500 Pulse/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25 Dsdpfx Aloxablxe Ajwc

Condition: used, Direct current, gear motor Dwedod Evuijpfx Al Asc -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art. No.: 3690041 Condition: New machine Cutting range (round): 300 mm Band speed: 20-100 m/min, infinitely variable Standard equipment includes: - Fully hydraulic, semi-automatic version After starting, the machine automatically tensions the blade, after the cut is complete, it returns to the starting position, stops the saw blade, and opens the clamping device. - Cutting sensor for automatic detection of material height - Horizontal clamping device, mechanical, hydraulic - Monitoring of saw blade tension, electromechanical - Chip removal brush - Measuring stop with a scale of 1,000 mm - Coolant system - Operating manual Djdpfx Aleilg Hde Aswc

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- Dwodpfx Aexwvh Ael Aec -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A Dwodpfxjxwlfwe Al Ajc -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Condition: used, Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV Djdpsd Evukefx Al Ajwc -Dimensions: 605/240/H200 mm -Weight: 30 kg

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Dsdpfx Aecuntzol Aewc Cutting speed: 35/70 m/min Standard equipment: - Horizontal clamping device - Length stop (600 mm) - Monitoring of saw blade tension, electromechanical - Chip removal brush - Coolant system - Operating manual