Used Demag Faw 1 for sale (556)

Year of construction: 2014, condition: used, Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible. Knodpez Dkh Ijfx Anujc

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: MIKA212, Technical specifications: 1x Demag KBK 1 column-mounted slewing crane, capacity 125 kg, with Demag DC chain hoist, 125 kg Useful load at full extension: 125 kg Height: approx. 3.5 m UK jib length: approx. 3.05 m Outreach: 2.5 m Hook height: approx. 2.65 m Total weight: approx. 350 kg Kodpfx Ajzv H Uqonuonc Including 125 kg Demag DC chain hoist (older model) Includes bolts, cable carrier, carriage, end cap, etc. Includes anchor plate 60x60 cm Slewing range: 300°, connection to 400V 16A Crane is dismantled and immediately available. Item location: 75053 Gondelsheim Other cranes are available, with load capacities ranging from 80-5000 kg. Please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Kedsz Dhnrepfx Anujnc Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment Knsdpfxjx D Ecco Anujc • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Knsdpfx Aezxxhuenujc

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: WIL9, Demag hall crane, portal crane, bridge crane including steel structure with floor control Dimensions of steel structure approx. 36 x 14.5 m with 1x Demag bridge crane 2.5 tons - gauge 14.3 m Payload/lifting capacity 2500 KG - 2.5 t Technical data of the system: Crane track/steel structure consisting of HEB200/HEA240 beams Length of steel structure approx. 35.75 m Overall width (outer edge of steel structure) approx. 14.5 m Overall height of crane approx. 6.2 m Top of running rails approx. 5.41 m Bottom of running rails approx. 5.17 m Top of bridge approx. 6.2 m Bottom of bridge approx. 5.68 m Hook height approx. 5.2 m Gauge 14.3 m Support spacing approx.: 6.1 + 6.1 + 6.1 + 6.1 + 6.1 + 5.5 m System is delivered complete: Steel structure / supports made of HEA240, running rails HEA280 incl. power rail/power supply Ksdpfozdcd Ssx Anujnc 1 bridge with 2500 kg Demag DH wire rope hoist with floor control Crane is disassembled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by forwarding agent or collection only by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: ROD391, Technical specifications: 1x Demag KBK 1 pillar slewing crane, NL 80KG, with Abus chain hoist, manufactured in 2021 Load capacity at full outreach: 80KG Height: approx. 3.65 m (pillar 3.05 m + pillar extension) UK jib length: approx. 3.1 m Outreach: 5 m Hook height: approx. 2.7 m Total weight: approx. 400KG Knodpfjz Tcv Dox Anuoc with 80KG Abus GM chain hoist, manufactured in 2021 including bolts, cable carrier, trolley, end cap, etc. Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000KG, please inquire See pictures Shipping via freight forwarder or collection only by prior arrangement

Condition: ready for operation (used), Year of construction: 2005, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Kedpfxoz Ibiko Anujnc Additional equipment • Hiltectro V-1000 IS robot (MY: 2020) • Belt conveyor with safety enclosure

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. Knjdpeyvwbwefx Anusc 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Kjdpev Uvn Iofx Anuenc Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: ready for operation (used), Year of construction: 2019, operating hours: 17,000 h, clamping force: 500 kN, screw diameter: 18 mm, Electrical injection moulding machine manufactured in 2019. This SUMITOMO SHI DEMAG Intelect 2 50/360-110 features a clamping force of 50 t and a screw diameter of 18 mm. It offers a maximum specific injection pressure of 2800 bar and a maximum dosing volume of 23 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Intelect 2 50/360-110 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2800 bar- Max. Dosing Volume: 23 cm³- Mold Height Min-Max: 160 mm - 350 mm- Tie Bar Clearance: 360 mm- Centering Diameter (Fixed / Movable Plate): 125 mm / 125 mm- Maintenance Group: 1- Core Pulls: 2- Working Hours (Drive): 17000 hrs- Ejector Force: 21 kN- Ejector Stroke: 120 mm- Max. Ejector Speed Stage 1: 333 mm/s- Max. Injection Speed: 200 mm/s- Mains Voltage: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Hot Runner Control: 3 zones integrated, 2.75 kW- Integrated Hydraulic Servo Power Unit: Max. 25 l/min Knjdoz Eq Scepfx Anujc

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. Kjdpfx Anjw H S Aveujnc All motions with frequency inverter! Modifications can be offered separately.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C Ksdpfx Ansz Eq Svjujnc

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ZBA112 A4 / A70D, power: 4 kW (5.44 HP), rotational speed (max.): 1,440 rpm, Demag motor ZBA112 A-4 Gearbox A70D H-1-44.1) 4 units in stock Condition: Used, in very good condition. Ksdpfxsywi Edj Anuenc ED=100% 4.0 kW 1440 rpm Brake 47.0 Nm B140 400V 50Hz Price on request

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA211, Technical specifications: 1x Demag KBK 1 slewing pillar crane, NL 250KG (load capacity on jib, de-rated to 160 kg) Useful load at full extension: 250 kg / 0.25 tons Height: approx. 3.5 m UK jib: approx. 3.05 m Extension: 3 m Hook height: approx. 2.65 m Total weight: approx. 350 kg with Demag DK chain hoist 250 kg including bolts, cable carrier, chassis, end cap, etc. Slewing range: 300°, connection to 400V, 16A Crane is disassembled and available immediately. Item location is 75053 Gondelsheim. Other cranes are available, load capacity 80-5000 kg, please inquire. See pictures. Knjdpfxjzv H U Do Anusc Shipping via freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Kedpfjygk Eiox Anuonc

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Knsdpfx Anoz Snpzouec Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: MIKA111-Kran152, DEMAG KBK overhead crane, dimensions approx. 18.2 x 3 m Kedpfxozv Icve Anusnc Load capacity / lifting capacity 2 x 50 kg per vacuum lifter Technical data of the system: Overhead crane track 2 x 8 x 3 m made of Demag KBK2 rails Height of steel structure 4 m Top of steel structure (purlin) 4 m Bottom of steel structure (purlin) 3.72 m Bottom of crane track 3.35 m Bottom of bridge 3 m Width approx. 3.1 m Lifting height of vacuum lifter approx. 30-220 cm External dimensions of steel structure (space requirement) 18.3 x 3.1 m Support spacing 8.85 m Dimensions of overhead crane track approx. 8 x 3 m System is delivered complete: KBK rails, rail connectors Carriages, end plates, cable track, holders/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) incl. 2 x vacuum pump with 2 x Palamatic vacuum tube lifter 3, capacity 50 kg System is disassembled and packed on a pallet 1 vacuum lifter is available as a spare Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or pick-up only after prior arrangement. Demag KBK1, KBK2 and KBK3 rails are in stock!

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 Knjdpfx Aetltvzjnujc DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Kedpfxjpwgr Hs Anujnc Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Kodpfx Anezz Rw Houonc Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,000 h, clamping force: 2,100 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2426 bar- Max. Swept Volume: 530 cm³- Mold Height (Min/Max): 340 mm / 790 mm- Tie-Bar Distance: 580 x 580 mm- Centering Ring Diameter (Ejector/Nozzle): 160 mm / 160 mm- Operating Hours: 13,000 hrs (Drives)- Core Pull: 1 circuit- Pump Drive Power: 30.0 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Feed Zone Cooling: Regulated temperature- Hydraulic Screw Drive: Motor I (high speed)- Nozzle Specifications: Open nozzle M24x1.5, Radius 38.0 mm, Bore 3.0 mm- Water Connection: 8-fold cooling water flow regulator with temperature display (max 10 l/min per circuit), separate connections for mold and machine cooling- Socket Combination: Integrated, 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A Kedpfsz Er Dtjx Anuenc

Year of construction: 1974, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Si12,5, Demag P625 H13 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 12500Kg -12,5t 380V 16A, hoist 6,5m, 4 strands ( 2 hoist speeds - 0,5 - 5m/min ) Hoist was overhauled by Erich Schäfer Corresponds to new condition Fully functional Pick up in 75053 Gondelsheim, forklift is available for loading Knedpfx Ajupw Aljnuec Shipping by forwarding agent possible, please ask for zip code

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Kjdpfx Aey Tx Rnenuenc

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Kodpfx Aj Aa Alwsnuonc