Used Demag Ac 80 for sale (525)

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Fodpfxjy Dp E Dj An Rjpg Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Fjdpjy N D E Aofx An Repg Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Fedpsy Dp Hzsfx An Rspg Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: as good as new (ex-display), Year of construction: 2010, Independent 2nd injection unit DEMAG Multi-plug 80 L for mounting from the side of IMM. Lab machine " like new " Fpedoiwx T Eepfx An Rsg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender Fpjdpfsyyyuusx An Rsg • TORO-systems material loader

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m weight max. in kg 80 kg Fpjdpfx Ansvzhhto Rjg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v

Condition: new, functionality: fully functional, 80 pcs new DEMAG rope guides / rope guide crane hoist parts for DH2000 DH1000 DH500 DH300 and 30x P-Zug rope guides P200 to P1000 plus 50 brakes (e.g. new brake discs, brake pads, brake shields, brake covers) all brand new Fpsdpfx Aov T Tq Den Rsg Manufacturer's original price approx. €300,000.00 Info: We have over 20,000 DEMAG spare parts in stock! Also check my other offers from warehouse stock!

Year of construction: 1990, condition: not inspected (used), The crane is dismantled. Storage location Oebisfelde. Fpodpfof Sftlex An Reg

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Fpodpjnfu I Iefx An Rog Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Fsdpfoygh Rvox An Ropg Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: ready for operation (used), Demag DCS-Pro 1 80 1/1 H3 VS30-30 chain hoist / crane SN: 94828902 - load capacity: 80 kg / control cable length: 2.00 m - chain length: 1.40 m, used, in good condition, fully functional, delivery as per photos. Fpodsx Eq Hljpfx An Reg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7154-0118, clamping force: 800 kN, opening stroke: 500 mm, plate width: 590 mm, plate height: 600 mm, TECHNICAL DETAILS Type of control: NC 4 control Closing system: Hydraulic Clamping force: 800 kN Clear distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Minimum mold size: 250 mm Maximum opening stroke: 500 mm Maximum distance between plates: 750 mm Screw diameter (horizontal): 18 mm Screw diameter (vertical): 25 mm MACHINE DETAILS Motor power: 18.5 kW Heaters: 8.8 kW Dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg Main connection: 400 V, 50 Hz, 135 A Maximum pressure: 210 bar Fpedowp I Syspfx An Reg Maximum flow rate: 130 l/min EQUIPMENT - Two-component machine - Horizontal nitrided system - Vertical arrangement with bimetallic screw - Complete machine history available

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Mounting plate dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between plates: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Fsdpeww H Nysfx An Rjpg Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history available

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component (2K) injection moulding machine Control system: NC4 Control Drive type: Hydraulic Technical Data – Clamping Unit Clamping force: 800 kN Tie-bar spacing: 420 × 420 mm Mounting platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection Unit – Two-component First system (horizontal): Nitrided screw Fedsww H S Iepfx An Ropg Screw diameter: 22 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General Data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and Additional Information Control language: German Complete machine history – available

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Fpjdpshwd E Nofx An Rog Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Fpedpfoy N R R Eex An Rjg

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, screw diameter: 40 mm, Injection moulding machine type Demag ET80-430-B2 for sale. The machine comes from a laboratory and was only used for material sample testing. Very clean condition. Works perfectly. Includes documentation and all diskettes. - Year of manufacture: 2006 - Approx. 44,600 operating hours - Screw diameter: 40 mm - Max. distance between platen plates: 700 mm - Min. mould height: 250 mm - Injection pressure: 2,025 bar - Ejector stroke: 150 mm - Without hopper Loading by forklift. Fsdpfxjy N I Ubj An Ropg More photos to follow. Please feel free to contact with any questions.

Condition: excellent (used), mileage: 203,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical information Number of cylinders: 6 Measures Dimensions (LxW): 1027 x 255 cm Weights Empty weight: 47.900 kg Carrying capacity: 100 kg GVW: 48.000 kg Functional Mast length: 64 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Registration number: BN-ZB-46 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Fpodpfxjydb Sue An Rjg Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), mileage: 203,229 km, fuel type: diesel, color: yellow, first registration: 10/2003, Year of construction: 2003, operating hours: 24,503 h, Technical information Number of cylinders: 6 Measures Dimensions (LxW): 1027 x 255 cm Weights Empty weight: 47.900 kg Carrying capacity: 100 kg GVW: 48.000 kg Functional Mast length: 64 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Fpedpsydcn Refx An Rog Financial information Price: On request Identification Registration number: BN-ZB-46 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Fpedpfx Aowk Aw Hjn Rog Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Dimensions of cargo space: 830 x 240 x 345 cm Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Fpjdpfewwqbyox An Rjg Carrier engine: - Upper engine: - Counterweight: 0 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Fpsdsyyzi Hspfx An Rog

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag Fpsdpfx Ajyxg Swjn Rsg type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: repair required (used), functionality: fully functional, Demag T12 / KBA125 / FG08 / KBA80 New! T12 i = 24.8 Fpedpfx Anjywk Ers Rsg KBA125 B-4 FG08 i = 9.87 KBA80 A-4 Price on request

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep Fsdpfxjx D Nlus An Rspg • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm