Used Dehairing Machine For Pigs for sale (66,709)

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Cedex Utd Eopfx Aiijri Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Crsdoxghngspfx Aiisi These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment. Cjdo Aaw T Aspfx Aiiori

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Crsdpev Ng E Tjfx Aiiei Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) Cedoxugf Hspfx Aiieri · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Cedpfey U Twrsx Aiijri

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations Crsdszx Rz Hspfx Aiisi - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance Crjdpfx Aiez D Dxgoiei • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection Credpfxozt Ni Es Aiiji * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Cedjyq Sbyjpfx Aiieri Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Rare package!

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) Csdpfxsxxb Rrs Aiisri 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Csdpsg Swz Hefx Aiiori Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Condition: used, Year of construction: 2012, XYZ Prototrak LPM Vertical Machining Centre (2012) Traverses X Y Z: 785 x 470 x 530mm, Table Size 900mm x 500mm, Spindle Speed 8000rpm, Spindle Motor Power 11kW, Prototrak, Rapid Feed XYZ Axis 20m/min, Spindle Taper BT40, 16-Station ATC. S/No. M7161, Machine Weight: 4200kg. Country of Origin: United Kingdom Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Codj Ah E Dxopfx Aiijri

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Crjdpfsx D Tbmsx Aiiei Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Codpfx Ajunia Hjiijri

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM Crsdpfez Eh Egox Aiioi AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, functionality: fully functional, Year of construction: 2018, CNC PIPE BENDING MACHINE, year 2018 Made in China Excellent condition, rarely used Liye DW 63 CNC x 2 AS CNC pipe bending machine – a hydraulic, fully automatic machine designed for precise bending of metal pipes. It provides high repeatability and is used in various industries, such as furniture manufacturing, automotive, and construction. Key technical parameters: • Model: DW 63 CNC x 2 AS • Manufacturer: Zhangjiagang Liye Machinery Co., Ltd • Power supply: 380V, 50Hz • Bending capacity (maximum diameter x wall thickness): Ø63 x 2 mm Credpfx Ais Ahx Rveisi • Automation: Full (CNC) • Control: Bending axis driven by a hydraulic cylinder, feed (X) and rotation (Z) axes driven by servomotors, ensuring high precision. • Materials: Capable of bending steel, stainless steel, aluminum, brass, and copper. • Additional features: Interactive touch screen, programmable springback compensation, automatic mandrel lubrication (optional) • Condition: Used, functional

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. Codpfx Aoyznu Seiijri 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines Crjdpfjz R Ir Ejx Aiioi

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Cjdpfx Aoz Rk N Teiisri Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Crjdpfjxvmttex Aiisi Min workpiece height: 25 mm Total machine height: 1900 mm Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Condition: refurbished (used), ROLLFORMING MACHINE Credpefgl Aqofx Aiiji PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Codpez St Hwefx Aiiori Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, Cedpjz Eh Nlofx Aiijri spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Cedpfjzzzm Ejx Aiiori Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.