ROLL FORMING MACHINE

ROLLFORMING MACHINE No1

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Gtodpfxeuk Ehxs Agbjt

Condition: refurbished (used), - Manufacture year 2007completely overhauled - BONGIOANNI variable cut axis system Godpetta I Eefx Agbett - 5 headlocks - 4 log turners - New control unit - New feed system - New electric cabinet/control SPS - Frame and rail system - Pantograph - New drive nom. 44kW

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Gjdpfx Ageiu Acpobjtt

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. Gtedofrvzvopfx Agbst The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum reliability. Internal pump, tank, fan control, low GWP refrigerant R454B. Refrigerating capacity 37 Kw, envious GWP refrigerant R454B We have a lot of chillers directly from stock available used and new . contact us for a no obligation quote. We rent / sell / and also take over the service for all refrigeration systems Germany-wide. Godpsfmd Hhofx Agbott

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Gsdev Nxbyopfx Agbott Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Godpfxovhc Uus Agbett Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Gedpfeu Eu Tnsx Agbett Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm Gedpfx Aer D N Eqsgbstt feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Gtodpfeqzibtex Agbst Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system