Used Defective for sale (1,102)

Condition: good (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 226 500123, Weinig four-sided planer in good, used condition. Quattromat 22 – Year of manufacture 1991 Ijdpfxeziu I Ee Ah Eetl Accessories: 4 planing heads The planing machine was used for many years in solid wood production. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 2007, lifting height: 4,570 mm, fuel type: electric, Weights Empty weight: 1.233 kg Functional Lifting capacity: 272 kg Working height: 657 cm CE mark: yes Condition General condition: poor Technical condition: poor Visual appearance: poor Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Itsdpsz Dh Hujfx Ah Eel Manufacturer: Genie Model: GS1530 Year of build: 2007 Condition: Used Data: Max. working height: 6,57 m Platform height: 4,57 m Lifting capacity: 272 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,63 x 0,74 m Platform length pushed out: 2,54 m Total dimensions LxW: 1,80 x 0,76 m Height transport position with railing: 2,03 m Height transport position without railing: 0,97 m Height transport position: mit geklapptem Geländer 1,73 m Gradeability: 30 % Drive type: Battery Empty weight: 1.233 kg Special features: white tires, anchor points for fall protection systems (PPE) available, indoor use only. Information: 28462 no function, control panel missing 28482 function ok, emergency stop defective. Location: 12681 Berlin immediately available

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from the premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including the basic accessories and base unit. The Vario Cooking Center is in excellent condition, as it comes from a training kitchen. The unit is available from approximately week 35. The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: 1100 x 756 x 485 mm • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 Itedjzvwqiopfx Ah Eol • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional included features: • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated spray hose with automatic retraction and spray dosage • High-quality pot base - seamless with rounded corners • Core temperature probe with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose spray on the unit, integrated water drain in the pot • Temperature unit adjustable in °C or °F • Cooking pot can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven from the manufacturer Rational is a CombiMaster® with 8 x 1/1 gastronorm trays in an electric version, allowing you to load the unit with deeper GN containers per tray. (It can also be converted to a 10-tray system). This combination oven was primarily used for reheating packaged food and is therefore in very good used condition. The combination oven is from the 2018 model year. The unit has undergone an inspection in our in-house workshop and is fully functional. The base cabinet shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 seal. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the cook through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042mm Minimum door opening dimensions for transport WxH: 845x1050mm Capacity: 8 x 1/1 GN Power connection: V: 400 / kW: 18.6 / Hz: 50-60 Weight: approx. 143kg Serial number: E11MI18072681444 Year of manufacture: 2018 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to serving temperature at the optimal climate. Automatic separation of fat for clean cooking chamber air. Ijdpfx Aezpvbgjh Eotl Semi-automatic cleaning program (see photo sequence). 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food item. Ventilated double-glazed door (swivels for easier cleaning). LED cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic flushing and emptying). Hand spray with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Itjdpfxjzxf Hks Ah Eel Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. Iodpfx Ajzl N Tuoh Ejtl TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: defective spare-parts repository (used), functionality: limited functionality, In this listing, you are purchasing a faulty ‘Keyence XM-1200’ coordinate measuring machine Item for sale: Itodpfx Ahoyrcx Se Eel 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device is not in working order Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. Itsdpfjzvl R Rjx Ah Eol The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself.

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day Itedpfxjkv Unto Ah Eol

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Iedpfszz H Emsx Ah Eotl Weight: kg approx. 34,200 Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 1987, functionality: unexamined, number of spindles: 19, Schleicher Unidrill 19 Multi-spindle drilling machine 19 spindles with 5 mm / 10 mm drills The machine is still in use and fully functional. Collection price – delivery possible upon request. Itsdpfxszxk Uyj Ah Ejl The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims due to fraudulently concealed defects also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: like new (used), Year of construction: 2018, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 568746, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, input voltage: 400 V, type of input current: AC, Details about the robot: Year of manufacture: 2018 Operating hours: Only 0.6 hours Condition: As new, flawless Ijdpjwtx Imsfx Ah Ejtl Model: Kuka KR 210-2700 Extra Inspection & Test: The robot can be inspected and tested on site at any time. This robot is ideal for applications demanding the highest precision and reliability. It has been carefully stored and is in impeccable technical condition. Note: Sale as a used consumable machine with exclusion of any liability for material defects.

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 295 kg, We are selling our used Optimum machine. The motor has a defect in the winding. The machine can be inspected and collected in Hoppegarten. No warranty, no guarantee, no returns. Iodezxp Nvspfx Ah Ejtl

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart rack conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will result in significant long-term energy savings. The machine was first installed in June 2021 in a canteen and used for lunch service. Due to the closure of the business, operations were discontinued. The dishwasher was newly purchased by the operator and accordingly well-maintained, with all necessary servicing carried out. HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even with plastics. The CN rack conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and discharge via a conveyor belt. The disassembly was carried out by Hobart’s factory service department. Itedpezu Rwmjfx Ah Esl Commissioning will also be carried out by the factory service department, with a contribution to costs, so that the warranty applies. This machine has a list price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service department. Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm, dimensions see photo sketch Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 Subject to change and errors.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Isdpfji Huvhsx Ah Ejtl -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Year of construction: 2011, condition: used, functionality: fully functional, This is a combination oven/steamer, model CMP 101, from the premium manufacturer Rational, in an electric version. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer, but can be purchased as an option. Itjdpjzu Ruljfx Ah Esl The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all equipment types. This unit is the optimal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10x1/1GN Weight: approx. 132 kg Serial number: E11MH11122284737 Year of manufacture: 2011 Condition: used, underwent comprehensive inspection, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement using a probe Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Itjdpfezxrtqjx Ah Esl Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.

Condition: defective spare-parts repository (used), functionality: unexamined, machine/vehicle number: 611878000365, Year of construction: 2007, Included in the scope of delivery: 1x reach truck, defective Manufacturer: STILL Model: FM-12 I Total weight: 2,150 kg Rated load capacity: 1,200 kg Rated drive power: 6.0 kW Maximum battery weight: 788 kg Battery voltage: 48V Year of manufacture: 03/2007 Serial number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0.0 h Overall width: forks (outer) approx. 800 mm Fork length: approx. 800 mm Battery age: 2012 Outrigger depth: up to 630 mm Overall height: approx. 2,460 mm Itedozxrraepfx Ah Esl Overall width: approx. 1,250 mm Overall depth: approx. 1,700 mm Overall depth with forks retracted: approx. 1,900 mm Overall depth with forks extended: approx. 2,520 mm Battery charger, used Manufacturer: Richter Gabelstapler Model: SE48V80A Overall width: approx. 500 mm Overall depth: approx. 400 mm Overall height: approx. 810 mm Note: The reach truck is now only used as a source of spare parts. Control unit is defective, and the battery is deeply discharged. Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, mileage: 505,200 km, power: 324 kW (440.52 HP), first registration: 07/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, total length: 8,700 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN TGA 26.440 – ROLLER TIPPER – LEAF SPRING – AIR CONDITIONING – VEHICLE HISTORY * Well-maintained! * German vehicle * Video of the vehicle available upon request (interior & exterior views) Itodpfx Ahozqxc Aj Ejl – Vehicle Manufacturer: MAN * Type: TGA08 * Model: TGA 26.440 6x4 BB * Vehicle Type: Truck chassis with roll-off system * Body Type: Roller Tipper * Initial Registration: 06.07.2007 * Fuel: Diesel * Engine Displacement: 10,518 cm³ * Power: 324 kW (440 hp) Weights – Permissible Total Weight: 26,000 kg * Technically Permissible Total Weight: 26,000 kg * Tare Weight: 12,420 kg * Permissible Axle Load, Front Axle: 8,000 kg * Permissible Axle Load, Rear Axle: 19,000 kg * Vertical Load: 1,000 kg Trailer Loads – Trailer Load, Braked: 24,000 kg * Total Train Weight: 44,000 kg * Combination with center axle trailer permitted * Rockinger trailer coupling * Trailer coupling inspected and registered Engine & Transmission – Manual transmission, 8-speed * Auxiliary drive * Differential locks * Rev limiter Comfort – Air Conditioning * Auxiliary Heater * Electric Windows * Heated Side Mirrors * Seat Heating * Seat Ventilation * 1 Bunk Cab – Roof Hatch, Manual Axle 1 – Leaf Spring Suspension * Tires: 385/65 R22.5 Axle 2 – Leaf Spring Suspension * Twin Tires * Tires: 315/80 R22.5 Axle 3 – Leaf Spring Suspension * Twin Tires * Tires: 315/80 R22.5 Body – Roller Tipper * Manufacturer: Multilift * Type: HLS2625 * Roll-off system * Extendable hinge * No identification plates Entries – Low-noise vehicle body * Wheel covers above the wheels required * Trailer/body specifications according to registration * Multilift HLS2625 registered as body Inspections – MOT valid until April 2026 * Safety inspection (SI) carried out * Last MOT passed without any defects found * Last SI passed without any defects found – EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ – EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (REGISTERED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Changes, errors, and prior sale are subject to change! You can find more vehicles on our website: Sales are exclusively based on our general terms and conditions – see our website. Important Note – Important Information: Despite careful checking of all details in our offer, it may happen that errors occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, machine/vehicle number: SH01-332, motor defect. 5000 EUR afte repair Ijdpfxez A Dh Ej Ah Ejtl

Condition: used, functionality: fully functional, For sale is a used button-turning machine from the manufacturer Hempel. The button-turning machine is fully functional. Itodpfxezyfvne Ah Eel To avoid any possible misunderstandings, an on-site inspection is possible and recommended after arranging an appointment. The sale is made in the current condition. For used machines, all warranty claims are excluded; the principle of "sold as seen" applies. Now, the mandatory statement: The sale is made with the exclusion of any warranty, liability for defects, guarantee, and right of return. The buyer agrees to this and acknowledges it with his purchase. Liability for damages resulting from injury to health, body, or life, as well as for gross negligence and/or intentional breaches of my obligations as a seller, remains unaffected.

Condition: ready for operation (used), machine/vehicle number: 2405/73, Year of construction: 1976, Heavy-duty trailer / industrial trailer AEG – 60 t payload For sale is a robust AEG heavy-duty industrial trailer with a payload capacity of 60 tons. The trailer is ideal for internal transport of heavy machinery, equipment, steel structures, and other heavy loads. Itedszxnv Uepfx Ah Esl Technical data: * Manufacturer: AEG * Year of manufacture: 1976 * Payload capacity: 60,000 kg / 60 t * Tare weight: approx. 7,100 kg * Inventory number: 2405-71 * Loading area length: 6.00 m * Loading area width: 2.50 m * Loading height: 1.18 m * Design: Heavy-duty / industrial trailer Due to its high payload capacity, the trailer is particularly interesting for industrial companies, mechanical engineering firms, plant builders, and heavy-load logistics companies. Inspection is possible by prior arrangement. Further technical information and photos can be provided upon request. The sale is made excluding any warranty for defects, to the extent permitted by law. Subject to prior sale.

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 Itsdszxhxvjpfx Ah Esl One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Itedpfeyx N Hqox Ah Ejl Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: ET1UA25015078612, This is an Ultravent hood from the manufacturer Rational, type UV 61/101/E, 60.75.134, manufactured in 2025. It is suitable for iCombi classic and iCombi Pro appliances. The hood has been inspected in our in-house workshop and is fully functional, including the matching connection kit. The list price of the hood is: €4,465 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new items. We will be happy to advise you on all appliance types. Our used appliance service for you: * 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs * High-quality branded appliances at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional – or your money back * Flexible shipping or self-collection options * Competent advice – before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 854 x 885 x 313 mm * Power connection: V: 230 / Hz: 50-60 * Article number: 60.75.134 * Serial number: ET1UA25015078612 * Year of manufacture: 01/2025 Itsdpfx Aey N Umwjh Eol Condition: Used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).