Used Defective for sale (1,103)

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Hnsdpfx Agjzrux Astjt Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,137 h, load capacity: 5,500 kg, fuel type: gas, fork length: 2,000 mm, Equipment: cabin, sideshift, For sale is a very well-maintained Clark C55sL LPG forklift, manufactured in 2016. The forklift is in good technical and optical condition and has only been used for 1,137 operating hours. Ideal for use in industry, warehouses, production facilities, or outdoors. Since the last maintenance, the forklift has only been operated for approximately 6 hours. Consequently, it is still in very good condition and ready for immediate use. Technical specifications: Manufacturer: Clark Model: C55sL Year of manufacture: 2016 Drive: Gas (LPG) Operating hours: 1,137 h Load capacity: 5,500 kg at a 500 mm load center Lifting height: 3,300 mm Hnedpfx Agjzr H Szotet Side shifter integrated Full cabin Work lights Double gas cylinder holder Tires: see pictures Fork length: 2000 mm Note: The UVV (occupational safety) inspection expired in 2024, as the forklift has hardly been used since then. For an additional fee, a new UVV inspection can be carried out, so that the forklift can be handed over ready for use. Inspection and a test run are possible at any time by appointment. All information has been provided to the best of our knowledge and belief. Errors, prior sales, and changes are subject to change. All information is provided without warranty; no liability is assumed for the accuracy, completeness, and currency of the information. The sale is made with the exclusion of any liability for defects in the material, insofar as this is legally permissible. The forklift can be inspected and tested after prior appointment. The price is net plus 19% VAT. Loading onto a suitable transport vehicle can be assisted upon agreement. The transport or collection is to be organized by the buyer.

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Hsdpfx Agox Ivkzotsnt

Year of construction: 2000, condition: ready for operation (used), Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible. Hnedpfx Ageymfdastet

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Hnsdpfsycwrhjx Agtst

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Hedpfx Ajyddzfsgtjnt

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Hnsdpeyi E Eisfx Agtst

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine Hnsdpfx Aedy Hrdjgtst A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554448, This is a combination oven/steamer SCC WE 202, in an electric version, from the premium manufacturer Rational, manufactured in 2016. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. The combination oven/steamer has only been used for 7,673 operating hours. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 seal This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the amount being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening dimensions for transport W x H: 1145x1900mm • Power connection: V: 400 / kW: 65.5 / Hz: 50/60 • Weight: approx. 351 kg Hsdpozkh Ihjfx Agtent • Serial number: E22SI16112554448 • Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Additional information: • In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Core temperature sensor • Integrated energy optimization • Care Control - Self-cleaning • Handheld spray gun with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - also overnight • Humidification adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Hnedpszf Nciefx Agtjt

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Hjdpfxezghflj Agtont

Year of construction: 1997, condition: ready for operation (used), A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible. Hnedey Hvrpepfx Agtet

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Hnsdpfov Rfqqex Agtet

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Hnodpfx Agowty Eaetet

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Hnedpfx Agoxxl Nljtst

Year of construction: 2013, condition: ready for operation (used), A Probat coffee grading machine for sorting out defective coffee beans is available. Machine dimensions X/Y/Z: approx. 1200mm/1000mm/1800mm, weight: approx. 450kg. An on-site inspection is possible. Hnsdpjxbhh Aefx Agtjt

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Hnodpfxsw U T Uco Agtjt

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Hedpexx Uf Aofx Agtent

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Hodpfx Aozka I Tegtont

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Hjdpfsy Uyf Nox Agtjnt

Condition: ready for operation (used), Year of construction: 2021, A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentation available. An on-site inspection is possible. Hnjdpfxezhw Sko Agtot

Year of construction: 1997, condition: ready for operation (used), Distance between centers: 2000mm, control: Siemens Sinumerik 810, the control's flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible. Hnsdpfx Aszt Sk Segtjt

Condition: ready for operation (used), Year of construction: 2019, fting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible. Hnsdozuktbspfx Agtst

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Hedpfxozvghko Agtent

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Hnjdpfxey Ax T Ue Agtjt