Used Defective for sale (1,047)

Condition: used, machine/vehicle number: XLEP6X2000517xxxx, mileage: 585,000 km, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 21242 Specifications: Km: 585,000 Transmission: Automatic with clutch 6x2 Full air suspension Engine brake Euro 5, 420 hp Good tires Zepro lift, 2000 kg Remote control SKAB body 21-pallet box, inside hight is 260 Cooling/freezing unit (not working) Bunk Radio/CD Itjdpfx Aew Ucldoh Neb Climate control/AC Servicing done at local workshop Video attached Ready for delivery Description:Scania P240 box truck from 2007.The truck has a 21-pallet box and is approved until 2026.Cooling/freezing unit is not working.Service and maintenance carried out at local workshops.Ready for delivery. Km: 585000 HK: 420 Technical approved: Yes EU-approved until: 10.04.2026 Own weight: 15500 Payload: 11425 Model: P420

Condition: used, machine/vehicle number: 6FPPXXMJ2PDG3xxxx, mileage: 260,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 21984 Specifications: 2014 model Mileage: approx. 260,000 km EU-approved until 15.08.2027 200 hp Rear seats included Itsdpfxsx Dqt To Ah Neb New studded winter tires (see photos) Summer tires Installed rear interior light AC/climate control Radio/DAB Ready for delivery Description:2014 Ford Ranger with two sets of tires.The owner is experiencing issues with the four-wheel drive and believes it is an electrical fault.Ready for delivery. Km: 260000 HK: 200 Technical approved: Yes EU-approved until: 15.08.2027 Own weight: 2116 Total Weight: 3200 Payload: 1009 Width: 185 Length: 527,4 Euro: 5 Model: RANGER Gearbox: Automatic Number of seats: 2

Condition: used, Adhesive melter, gluing machine, hot glue machine, industrial hot glue gun, melting glue gun -sold as a source of spare parts -Connection: 220 volts -Machine: electrically heated -for granules -Propulsion via adjustable geared motor Ijdpfx Ahsb A Rf Sj Netb -Dimensions: 700/500/H1200 mm -Weight: 150 kg

Condition: used, three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm Itededzz Euepfx Ah Njb -Remark: Foot holder partially defective, see photo -Shaft: Ø 28 x 60 mm -Design: B3 -Dimensions: 420/290/H220 mm -Weight: 42 kg

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg Itodpfx Ahjd Hp Tze Neb

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp Itodpfx Ahsdpvwio Nsb -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Itsdpfx Ahei Huvhe Neb -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, Electric motor, three-phase motor Itodpsdzzhgjfx Ah Nsb -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Condition: used, Electric motor, three-phase motor Ijdpodzzhiofx Ah Nstb -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Isdpfx Ahof Hkgpe Netb Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: not inspected (used), Bosch Rexroth Type: SCARA SR6 control panel defective Bosch Rexroth swivel arm robot turbo SCARA SR6 with control unit Nominal load 2 kg Isdpjvx Taisfx Ah Njtb Maximum load (sleeve ∅ 20 mm) 5 kg Maximum load (sleeve ∅ 25 mm) 8 kg Rated maximum mass moment of inertia (axis 4) 500 kgcm² Max. mass moment of inertia (axis 4) 1000 kgcm² Horizontal force, continuous/max. 60/150 N Vertical force, continuous/max. 200/300 N Torque (axis 4), nominal/max. 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software Itsdpshabk Defx Ah Neb -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Feed 6 kW worked 1995 - 2012 approx. 4 hours/day Itedpfx Aekv Untsh Njb

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Isdox Da Tvopfx Ah Netb Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes - 1x in working order; OSL-III 8607719 Itodpfjxg R Nysx Ah Nsb - 1x defective (for spare parts); OSL-III No. 8412427

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Isdpfod Rmcmsx Ah Notb Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Itodpfxedzqmfs Ah Neb Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Year of construction: 2003, condition: defective spare-parts repository (used), functionality: not functional, Cieffe hardening oven The heating is partially broken and needs to be repaired. The oven is half disassembled. You are welcome to come by for a viewing by appointment. Itjdjv Dlkkopfx Ah Njb

Year of construction: 2023, condition: refurbished (used), This listing is for a vacuum packaging machine from manufacturer VakuMit, model EST 20 LC. The vacuum in this unit is detected using a proprietary, patented process developed by VakuMit. The vacuum packer is equipped with a powerful 21 m³/h pump. Operation is controlled via the LC control panel. The machine has been fully overhauled in our in-house workshop and is in perfect working condition. The base cabinet features ball-bearing drawers and castor wheels with brakes. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6 months warranty on electrical components (limited to replacement of defective parts, does not cover removal and installation costs) - High-quality branded equipment at fair prices - Professional refurbishment, inspection & expert cleaning - Tested & fully functional – money-back guarantee if not - Flexible shipping or collection options - Competent advice – before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Technical specifications: Base cabinet (W x D x H): 470 x 620 x 760 mm Chamber size: 410 x 420 x 140 mm Seal bar length: 405 mm Power supply: 230 V / 1.3 kW Packaging output: approx. 1-2 cycles/minute Standard vacuum pump: 21 m³/h Weight: approx. 70 kg Machine number: 1900031023 Year of manufacture: 2023 Condition: used, fully refurbished, fully functional LC control – SemisSens Touch: - With push-button operation - Includes patented vacuum detection - Easy cleaning - User-friendly interface Further details: - Complete stainless steel vacuum chamber and housing Iedpeyax Ursfx Ah Njtb - Easily removable seal bar - Automatic adjustment of sealing intensity - Service-friendly machine design - Soft-air return ventilation - Acrylic lid for monitoring the packaging process - Automatic operation cycle with lid opening - Vacuum detection (no timer-based controls) Shipping: Delivery or collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by special arrangement Subject to alterations and errors. If you have any questions, need advice or would like to view the machine on-site, please contact us by phone during our business hours: Monday–Friday 09:00 – 13:00 and 14:00 – 17:00. Sale only subject to our general terms and conditions (AGB).

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) Itodpfeyaqgyox Ah Nob - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Isdjyaqczopfx Ah Njtb Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, functionality: fully functional, Offered for sale are used 20DV office containers from Berlin. CONTAINER TYPE: 20DV Office Container CONDITION UPON DELIVERY: Used, wind- and waterproof, without equipment, original photos All containers are equipped with electrical installation and heating; the entrance door is located on the short side. The containers are sold in used condition and may show defects, impurities, color variations, rust, etc. DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal height 2500 mm. AVAILABILITY: Immediate Itjdsyapt Sspfx Ah Neb TRANSPORT: You are welcome to provide your postal code so we can offer you a free and non-binding quotation for the container including delivery, and unloading from the truck if required. VARIETY: We also offer shipping containers in all common sizes (20DV, 40DV, 20HC, 40HC…) for every need, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! MAGITU GmbH

Condition: used, Year of construction: 2006, operating hours: 1,800 h, CE mark: yes Serial number: cat0365ccmcy00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22153 Itodpfxeyagdbo Ah Neb Specifications: Model Year: 2006 Hours: Approximately 18,000 hours Weight: 71,900 kg Power Output: 301 kW Machine Width: 390 cm Track Width: 65 cm Cab Display: Not functioning Undercarriage: See photos Bucket Attachment: Direct attachment on bucket Bucket Type: Tooth bucket Air Conditioning: Yes Radio: Yes Lights: Yes Ready for Delivery: Yes Description: We have a 2006 Cat 365C excavator with a tooth bucket for sale. According to the owner, the machine operates as it should. The hour meter shows approximately 18,000 hours, but please note that the cab display is not functioning. A new battery was installed in the summer of 2025. Be aware that errors and defects may occur, and some maintenance or repair costs should be expected. The machine is ready for delivery. Hours: 1800 Own weight: 71900 Width: 390 Kw: 301 CE: Yes

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. Additional equipment • chip conveyor is included Itedjyaaw Uopfx Ah Nob Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 36 m/min • Workpiece: 24-axis changer • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Machine still under power

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits Iedpjx U U Ixjfx Ah Notb • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v • Frequency: 50 hz • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power