Used Deep Drawing Machine for sale (65,113)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Lhjdewx E N Iepfx Ad Nsb Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Ljdpfxev A Uw De Ad Nehb Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm Lhjdpfxjwyup To Ad Nsb X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Ledpfswu Eb Aox Ad Nohb Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Lhodpfxowmnhve Ad Nsb Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: used, functionality: fully functional, Wire drawing machine COMPAC – model TR560 – 7 steps of drawing Raw material : low carbon hot rolled wire rod Input: from fi 5,5 mm output: 1,8 mm on the last step Speed: cca 15 m/s Diameter of blocks 560 mm (5 pcs with ceramics) Engine power - 41 KW Electronics: SANTERMO matrix cassette No. 1 rotating on a chain, others fixed with water for cooling 2 cassettes for washing the wire +1 rotating cassette (spare) +1 block (reserve) Lsdpfxjw Ephne Ad Nshb Complete with two mandrels for unwinding. We have complete documentation for the machine. The machines are in good condition, we used them for production and dismantled them at the end of last year.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: Lhedpewi Tidjfx Ad Nsb inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, drilling depth: 750 mm, spindle speed (max.): 6,720 rpm, drill diameter: 20 mm, spindle stroke: 1,450 mm, distance between centers: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drill diameter: 4 – 20 mm Drill depth: 750 mm EQUIPMENT - Chip conveyor - Air cooler Lodpfxswm Ebye Ad Nohb - Filter unit - Revolving belt with workpiece carriers

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38L/9008, Offer Number: M38L/9008 Lodpewxdk Dsfx Ad Nohb Machinetype: pre-drawing machine Make: RMG Type: 910-2563-21 Constr. year: 2003 diameter range: 15,6 mm high-tensile: 14,1 mm capstan diameter: 900 mm drawing speed: 16 m/min output: 1500 kg Location: In our warehouse

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Lhodpjv Tctusfx Ad Nsb

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Ledpfjwi S Ixjx Ad Njhb Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data Ljdpfx Aow Izr Aod Nohb X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: good (used), DROOP & REIN - SZ 100 / Lubrication Groove Broaching Machine Lhedpfx Adew R S Rho Njb - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Groove length per pass: 100 mm - Distance between chuck / tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good overall condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Errors and omissions excepted.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Make: RMG Type: 67 Constr. year: 2020 diameter range: 11 mm capstan diameter: 700 mm Lodpfswi Tdzsx Ad Nshb clear width: 150 (160) mm Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Lhjdpfxsw Elrvo Ad Nsb Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Ledpfxow Agqho Ad Nohb Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 1961, A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible. Lhjdpswq R N Refx Ad Njb

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Ledsw R Eqbjpfx Ad Nshb • Frame opening (normal): 78.5 × 108.5

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 Lhjdpjwxdkqjfx Ad Njb diameter range: max 18 mm feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Center height above table: 250 – 600 mm Z-Axis Lhodpfew Ekfuex Ad Neb Feed rate: 0-7,000 mm/min W-Axis - 400 mm Feed rate: 0-7,000 mm/min X-Axis - 800 mm Feed rate: 0-2,000 mm/min Y-Axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Includes 1,700 l coolant system 20 single-lip drills from D=6 mm–20 mm/lengths from 1,200–1,750 mm Operating hours: 13,000 h

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Type: SKP26 Constr. year: 2003 diameter range: 26 mm Lhodpfx Adowi Thgo Njb drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm capstan diameter: 1300 mm Location: Germany

Year of construction: 1968, condition: used, Renz DPS spiral drawing-in machine Machine number: 50223 Ledpfx Asbq A D Rjd Nohb

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 286, workpiece weight (max.): 2,000 kg, spindle speed (max.): 3,000 rpm, travel distance milling slide X-axis: 650 mm, travel distance milling slide Y-axis: 300 mm, travel distance milling slide Z-axis: 600 mm, swivel angle A-axis (min.): -20 °, swivel angle A-axis (max.): 20 °, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis (transverse): 650 mm Y-axis (vertical): 300 mm Z-axis (drilling axis): 600 mm A-axis (swivel range of the drilling axis): ± 20° W-axis (table adjustment): 650 mm Control: Siemens Simatic OP17 Drilling capacity Maximum drilling depth: 900 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 4 – 20 mm Thread cutting: M 16 Drilling spindle Spindle mount: MK 2 Spindle speed: 0 – 3,000 rpm Spindle drive (60% E.D.): 6.0 kW Spindle drive (100% E.D.): 4.1 kW Workpiece table Dimensions: 1,100 x 650 mm Swivel range: ± 360 degrees Load capacity: 2,000 kg MACHINE DETAILS Length: 2,620 mm Height: 1,637 mm Table height: 950 mm Width: 1,485 mm Weight: 1,600 kg Lhsdpev Iay Uefx Ad Neb X-axis (transverse): ball screw with servo motor Y-axis (vertical): ball screw with servo motor Z-axis (drilling axis): rack and pinion drive with servo motor W-axis (table adjustment): ball screw with gear motor

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Ljdpfx Ast Ixkzjd Nehb Maximum Inlet Wire's Diameter: 30 mm

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse Lhjdpfx Adswi S R Ts Nob