Used Deep Drawing Machine for sale (92,323)

Condition: good (used), DROOP & REIN - SZ 100 / Lubrication Groove Broaching Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Groove length per pass: 100 mm - Distance between chuck / tailstock center: 350 mm - 3 working speeds - Electric chuck guard Ijdpew R S Rhsfx Afisbc - Good overall condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Errors and omissions excepted.

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5 Ibsdpfew R Eqbjx Afijc

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Ibedev Tctuopfx Afijc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer Buck Maschinenbau GmbH !!! Special price 95,000 !!! • Machine number 00-1646/1 • Working area (mm): X 1,600, Y 1,200, Z 1,600 • W-axis 500 mm, B-axis, A-axis swivels 19° Ijdju Hzqcjpfx Afijbc • Full machine enclosure • Chip conveyor and high-pressure coolant system • Tool holder SK50 • Heidenhain TNC 430 control • Table load capacity 10 tons workpiece weight • Spindle speed 4,000 RPM • Rapid traverse 20 m per minute • Tool changer for 20 tools • Machine can be inspected under power at any time by appointment

Condition: refurbished (used), Year of construction: 1980, Technical Details : Year - 1980/ 2020 reconditioned Speed - 7m/sec. Number of blocks - 7 Input wire diameter - 5,5 mm Output wire diameter - 2,0 mm Line Consits : - Decoiler - Mechanical descaling and brushing - Wire drawing machine 7 blocks Iedpow Dpqgjfx Afiobc - Coil winder for coils up to 800 kg ( Vertical and horizontal spooler )

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Isdpfx Afew Izr Aeiebc Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine - Drilling depth approx. 500 mm - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills - Connection cable Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Isdpowm Hclofx Afiobc Subject to errors / mistakes

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm Iedpfx Aewi S R Tjfiebc capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: ready for operation (used), Year of construction: 1961, A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible. Ibsdpfx Aewq R N Rofijc

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Ibsdewyup Tspfx Afisc Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: used, Year of construction: 1991, Technical Details : Year - 1991 Speed - 20 m/sec Number of Blocks - 13 +1 El. Power - 13x55 Kw , 1x60 Kw,1x55 Kw Danser arms Inlet wire - max. 7 mm ( height and low Carbon ) Output wire - 1,2 - 2,4 mm Condition - excellent - Refreshed in 2020 Line consists : Ibedpfjw Dpm Usx Afisc - Mechanical wire pay off - Mechanical wire cleaning unit - Line with 13+1 blocks - wertical dead block + Horizonttayl unwinding unit

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: Ibjdpfewh Rp Esx Afioc - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Isdpowx E N Ijfx Afiebc Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm Ibsdewi S Ixspfx Afioc finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Ibedow Extyjpfx Afijc

Condition: used, functionality: fully functional, Wire drawing machine COMPAC – model TR560 – 7 steps of drawing Raw material : low carbon hot rolled wire rod Input: from fi 5,5 mm output: 1,8 mm on the last step Speed: cca 15 m/s Ijdpfxew Ephne Afijbc Diameter of blocks 560 mm (5 pcs with ceramics) Engine power - 41 KW Electronics: SANTERMO matrix cassette No. 1 rotating on a chain, others fixed with water for cooling 2 cassettes for washing the wire +1 rotating cassette (spare) +1 block (reserve) Complete with two mandrels for unwinding. We have complete documentation for the machine. The machines are in good condition, we used them for production and dismantled them at the end of last year.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Ijdjw Elrvspfx Afisbc Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Center height above table: 250 – 600 mm Z-Axis Feed rate: 0-7,000 mm/min W-Axis - 400 mm Feed rate: 0-7,000 mm/min X-Axis - 800 mm Feed rate: 0-2,000 mm/min Y-Axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Iodpfxsw Ekfus Afiobc Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Includes 1,700 l coolant system 20 single-lip drills from D=6 mm–20 mm/lengths from 1,200–1,750 mm Operating hours: 13,000 h

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Machine type: Samag TFZ 2L-1000 Control system: Isdpfjw Ecftox Afiebc Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm Ijdjwi Tidjpfx Afiobc number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 1,400 rpm, table length: 1,050 mm, table width: 1,050 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed: 50 – 3,000 rpm Centre height: 240 – 1,040 mm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm Feed rate series 2: 18 – 160 mm/min, 35 – 320 mm/min Rated motor speed: 233 – 2,100 / 465 – 4,200 rpm Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Rated motor power: 0.75 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT 3-axis digital readout by Heidenhain Ibsdpjwvi Iiofx Afioc Including coolant unit

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Ibjdpjw Agqhsfx Afiec Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Type: SKP26 Constr. year: 2003 diameter range: 26 mm drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm Ibsdpfx Aewi Thgsfioc capstan diameter: 1300 mm Location: Germany

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK Iedpfxowu Eb Ao Afiebc - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Make: RMG Type: 67 Constr. year: 2020 Isdpowi Tdzofx Afiebc diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Location: In our warehouse