Used Deburring Machine Rotor Finish for sale (65,690)

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Ffedpfx Adoppgcvjpjw Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without Fedpjk Egrtefx Adpsfw replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Ffedpfxjr I E Exo Adpjw Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min Ffedpfx Adjk Uqhaopsw - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide Ffodpfx Aoppgcrodpow - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm Fsdpfx Adjppgcyspefw range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, Model Name B3 Entgrat-/Anfasmaschine Fodpfx Adok Au Drjpjfw

Condition: new, Model Name Anfassystem UZ12 ULTRALIGHT Ffedpfek D Nyiex Adpew

Condition: new, Model Name Anfassystem B22 ZERO Fodpfx Ajk Au Dvsdpofw

Condition: used, Year of construction: 2000, diameter of brush 250 mm width of brush 80 mm turning speed range 1500 / 3000 U/min voltage 380 Volt total power requirement 2,0 / 3,0 kW Ffsdpfxjxaa Ifj Adpow weight of the machine ca. 175 kg dimensions of the machine ca. 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : ?machineno=1008-9238987

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW Ffedpfx Asxaamnedpow weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: used, Vibratory finishing machines Pre-filter system, filter system, pre-filter container, water filter for cylindrical vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing cylindrical vibrator, Trowal system, continuous vibrator Ffedpfx Adeigamuspjw -Pre-filter system: for vibratory finishing machines or others -Transport frame: mobile, with 2 filter inserts -Collection tank: volume approx. 350 litres -Total dimensions: 1400/620/H920 mm -Weight: 106 kg

Condition: used, Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW Fsdpfjb U Izpjx Adpjfw -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg

Condition: good (used), Deburring machine, hole deburrer, bore deburrer, deburring device, brush deburring machine Ffjdpsrw Daajfx Adpsw -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: used, Brushing machine / brush deburrer - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg Ffodpfx Adeu Nu Rnepow - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW *

Condition: used, Technical details: grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch * Fsdpfx Adou Ng S Dspsfw

Year of construction: 2003, condition: used, Technical details: workpiece length: 130 - 2000 mm diameter min.: Ø 10 mm diameter max.: Ø 60 mm control: Fagor 10/102 S Fsdpfju Ngc Nsx Adpofw dimension machine xH: 3,8 x 3,8 x 1,9 m dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m machine weight ab.: 4 500 kg Milling and deburring machine CNC of pipe ends or round steel on both sides. - Material feed via conveyor belt, travel distance approx. 3 300 mm. - Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed air) - Cutter holder, both sides/opposite - milling spindle and brush holder arranged one behind the other - Operation via control panel on the switch cabinet Support: - 2 x, 1x movable and 1x fixed - Lateral displacement of the right support Length 1725 mm by hand - Working paths transverse=5 - 50 mm; longitudinal=5-50 mm - Working spindle = speed max. 320 rpm *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. The F200 XL is a 3-station machine and comes standard with the brush height tracking system designed by Q-Fin. In combination with the simple button system, this ensures that setting up and working with the F200 is self-explanatory, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with continuously adjustable speed on the conveyor and on the brush(es) and/or grinding head(s), making all possible operations and results achievable. You determine the desired finish yourself. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, enabling even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is not Ffsdex U D Dpspfx Adpew without reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. It has been checked, tested and is working 100% properly. The F200 XL is a 3-station machine suitable for deburring, grinding and/or rounding small sheet metal parts. This deburring machine has a grinding unit as its first processing station, followed by two cup brushes. The grinding belt removes burrs or gives the product a nice line finish. The brushes ensure the desired rounding of the product and give the surface an even finish. Fedex U Dx Hopfx Adpsfw The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g. stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the transport table, allowing even smaller workpieces (from 10 x 10 mm with magnetic system) to be processed safely, smoothly and quickly. It is with good reason that we at Q-Fin are convinced of the benefits of a narrow machine for small workpieces. In many cases, the throughput speed of this machine is 5 times higher than that of comparable machines.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. It has been checked, tested and is working 100% properly. Removing slag is a labour-intensive task that often still involves the use of a hammer and chisel. Alternatively, an electrically powered hand-held machine can be used for this purpose. Due to the heavy load during operation, both for the operator and the hand-held machine, these hand-held machines need to be replaced regularly. This results in high costs, additional waste and possible health problems for the operator. Fedpsx Ux Rwofx Adpofw Manual slag removal is time-consuming and stressful for both the operator and the machines, leading to high costs and wear and tear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding. The removed residue is collected in a container and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed with touchscreen controls for ease of use. The slag is effectively removed by two counter-rotating slag removal rollers, which strike the product twice per revolution. The result is a flat product that is ready for further finishing.

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Fedpox Uwlajfx Adpsfw Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06202305, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes Fjdpfx Asw Ec U Iedpefw - Air shock web width 360 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Fodjqrr A Rjpfx Adpefw

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Ffsdpfx Aev N I Hledpew Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm Ffedpfx Adjxc E Icjpow total power requirement: 31,3 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m