Used Kaltenbach Kks 400 Na for sale (106)

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm Ijdpfxjb Sciaj Adnea cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Iodpfxjd N H A Nj Adnsa Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Iodpfsq Ukvxsx Adnja Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min type of control konvent. voltage 380 V Isdpfxoxu Nrio Adnoa connected load 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Iedpfx Aexwnz Iednja Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Isdpfslug Tusx Adnja

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Ijdpfx Adjwx Nn Ionja

Condition: used, Kaltenbach KKS 400 Technical Specifications Saw blade diameter: 370 mm Cutting diameter: 115 mm Stroke: - mm Cutting area at 90 degrees, flat: 300 x 35 mm Cutting speed: 11 / 15 / 22 m/min Ijdjxhdvvopfx Adnja Total power requirement: 1.4 kW Machine weight approx.: 850 kg Space requirement approx.: 1100 x 1100 x 1600 mm

Condition: excellent (used), Year of construction: 2021, saw blade diameter: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 76 rpm, Equipment: rotational speed infinitely variable, Kaltenbach KKS 401 NA 2000 Retrofit Model: KKS 401 NA Year of overhaul: 2021 Complete retrofit and overhaul in 2021, including all-new electrics, controls, and drives. Ijdpfx Adoxmv Rconja Saw motor: 5.5 kW, frequency controlled Saw blade speed: 20–76 rpm Blade cutting speed (400mm): 25–96 m/min Working range, round material: 135 mm Working range, square material max.: 130 x 130 mm Working range, rectangular material max.: 230 x 80 mm Kaltenbach KKS 401 mit NC-controlled mitre adjustment Kaltenbach RKS 451 / KKS 401 feed extension, 2000 mm Extended feed length for efficient processing of particularly long sections. Flat magazine for 6m steel materials, 6 x 2m - For preloading of round, square, and profile material - System designed for materials up to 200 mm width (slot width adjustable) - Material supplied via chain conveyor with loadable compartments - Material separation by compartment - Fully automatic loading process controlled via Siemens PLC on the saw - Material adjustment at the magazine is manual - Magazine payload max. 2.0 tons - Material loading possible from front side - Protective enclosure with light barrier - Total length approx. 7.5 m - Total width approx. 2.5 m Kaltenbach RKS 451 / KKS 401 chip conveyor Minimum quantity lubrication by Menzel with recirculating cooling system including integrated pump - Switchable in machine settings between minimum quantity and recirculating lubrication Remote maintenance module, interface for remote machine access and update capability via remote maintenance by Lupberger Systemlösungen OHG Preparation for offload system installation - Hardware preparation for future installation of an offload system Saw cycle control - User operates the control in cycle mode - Data entry in surface structure required for the entire bar - Fetch material (with cut-off flap or magazine option) - Relative positioning - Absolute positioning - Absolute cutting with mitre selection (with NC-controlled mitre and pusher feed option) - Relative cutting with mitre selection (with NC-controlled mitre option) - Wiper function (with wiper arm and material disposal unit option) - Material eject front - Material eject via flap (with pusher feed and flap) - Repetitions - Program end Fully operational, in very good overall condition. Price: Negotiable plus VAT. (no warranty)

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, saw blade diameter: 400 mm, cutting height (max.): 120 mm, Automatic circular saw for aluminium. Mitre device and chip conveyor. Cutting range round approx. 120 mm. The machine comes from a trade-in, untested. According to our customer, it worked until the end. Since we have not carried out a functional test, the sale is made excluding any warranty, and returns are not possible. Ijdjxlcd Hepfx Adnsa

Condition: refurbished (used), Year of construction: 1991, For sale is a Kaltenbach cold circular saw. The machine has been completely disassembled and rebuilt. As part of the overhaul, the gearbox, motor, and hydraulics were reconditioned. The table has been planed and fitted with new bearings. Gearbox backlash-free! Isdoxq S Iljpfx Adnsa Type: KKS 400 E Year: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid advance/return: 1,550 mm/min Max. working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Böhmenkirch Shipping available on request Forklift available for loading.

Condition: new, Year of construction: 1984, saw blade diameter 400 mm Isdsvu Hcvspfx Adnea capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed roller conveyor 1500 - Roller conveyor with stop 1000mm

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each Iedpfx Adowk Icbsnoa - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Year of construction: 1980, condition: used, machine/vehicle number: 55155, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm cutting speed: 19/28 m/min engine: 380 V, 1,7/2,6 kW Isdpfxoct Nc Ie Adnsa space needed: 1100 x 1050 x 1620 mm weight: 850 kg

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm Isdpfx Ajixumvsdnja

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm Iodpetqqrzofx Adnsa cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Isdexb Aqxopfx Adnea Forklift available for loading.

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Isdpfswp Ipxex Adnja

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm Isdotp Hgtepfx Adnja weight: ca. 850 kg

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Ijdpfx Ajxb Aqfjdnja Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm Ijdehz T Hfepfx Adnea weight: 700 kg

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Iedpfxjw Ebqus Adnsa Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: refurbished (used), Year of construction: 1998, A Kaltenbach cold circular saw is for sale. The machine has been completely disassembled and rebuilt. During the overhaul, the gearbox, motor, and hydraulics were overhauled. The table was refaced and re-bearings were installed. Gearbox is backlash-free! Ijdpfx Ajwcgdhjdnsa Type: KKS 400 E Year of manufacture: 1998 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / Pick-up in 89558 Boehmenkirch Shipping available upon request Forklift available for loading.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 304289, saw blade diameter: 450 mm, cutting speed: 1,000 mm/min, cutting width (max.): 5 mm, opening stroke: 160 mm, TECHNICAL DETAILS Saw Blade Saw blade diameter standard: 450 mm Saw blade diameter min.: 370 mm Cutting width: max. 5 mm Saw blade mounting – Bore: 50 mm Ijdsw H Ivaspfx Adnsa Saw blade mounting – Number of driving pins: 4 pcs Saw blade mounting – PCD of driving pins: 80 mm Saw blade mounting – Diameter of driving pins: 13 mm Saw blade feed speed: 0–1,000 mm/min Vertical Clamping Unit Opening stroke with aluminum pressure pad (mitre cuts): max. 160 mm Opening stroke with steel pressure pad (straight cuts): max. 160 mm Rotary Table Rotary table adjustment: stepless ±60° Cutting Speed with 450 mm Blade Diameter Two-stage with chain: 11/22 m/min, 13/26 m/min, 15/30 m/min Two-stage with toothed belt: 35/70 m/min Frequency-controlled with toothed belt: stepless from 7 to 43 m/min, stepless from 15 to 75 m/min Automatic Feed Unit Programmable length: max. 9,999 mm Material width: max. 240 mm Remnant length with single-sided swiveling blade (0/60 degrees): min. 78 mm Remnant length with clamping gripper: min. 98 mm Remnant length with double-sided swiveling blade (-60/+60 degrees): min. 265 mm Remnant length with double-sided swiveling blade and clamping gripper: min. 285 mm Clamping force max.: 3,900 N Clamping force min.: 800 N Traverse speed: max. 30 m/min MACHINE DETAILS Electrical Connection Operating voltage: 400 V, 50 Hz (3-phase) Control voltage DC: 24 V Solenoid voltage DC: 24 V Two-stage with chain: 1.8/2.7 kW Two-stage with toothed belt: 3.7/4.7 kW Frequency-controlled with toothed belt: 4.0 kW, 5.5 kW EQUIPMENT HSS solid steel blade HSS segmental saw blade Automatic feed unit

Condition: as good as new (ex-display), This Kaltenbach KKS 400 E has been completely overhauled. The KKS 400 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: Steel, Stainless Steel, Chrome Steel, Brass, Copper, Bronze, etc. Advantages at a glance:  Clamping, sawing, reversing and opening – all with one lever  Saw height can be adjusted by means of a lever  User-friendly mechanical controls mounted directly on the machine  Good accessibility for changing saw blades and maintenance work  Workpiece clamping device on both sides of the saw blade  Two sawing speeds for almost all applications  Kaltenbach ‘cut from below’ principle ensures good chip removal  Ergonomically positioned controls for ease of use  Adjustable saw stroke limiter and rapid return of the saw blade Iodpswpchcofx Adnea