Deburring machine

RSA Entgrater DUO

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Ledpfxsuiy Nyo Ac Ioab Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), functionality: fully functional, Electronic control of X-axis X-axis positioning speed (m/min) 25 Pneumatic tilting heads External tilt 45° Mechanical adjustment of intermediate angles Hydro-pneumatic blade feed Usable cutting length (mm) 4,000 Minimum standard cut with 2 heads at 90° (mm) 310 Ledoyn Adyspfx Ac Ijab Blade diameter (mm) 500 Feelers / copy sensor

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Ljdpfxsyw Inqo Ac Isab Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Laodpfx Acsyxntvj Iob

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Laedpsy Ddd Uefx Ac Ieb

Condition: good (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 1122, For sale is a robust and fully functional Weiler lead screw and feed shaft lathe from 1968. The machine comes from our workshop inventory and was in use until recently. Technically, it is in working condition; cosmetically, it shows signs of use consistent with its age. This is a classic, solidly built toolmaker's lathe of proven German industrial quality. Ideal for workshops, training, maintenance, or small manufacturing businesses. —— Condition • Used • Fully functional • Not refurbished • Age-related signs of wear —— Special Features • Heavy-duty construction • Renowned Weiler quality • Simple, low-maintenance technology • Ready for immediate use —— Location & Handover Lasdpfjynwiwox Ac Isb Location: Eisenach Collection preferred. Loading by arrangement possible. Sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: used, Year of construction: 2007, x-travel 350 mm y-travel 210 mm z-travel . mm digital readout ja table surface area 800x 240 mm turning speeds 115-1750 U/min feed . m/min throat . mm spindle stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Ljdeyqv I Depfx Ac Isab

Condition: new, Year of construction: 2026, CORMAK SP250 Polisher – industrial disc polisher for deburring and surface finishing The CORMAK SP250 satin finishing machine is a high-performance disc polisher designed for professional surface finishing, deburring, matting, and high-gloss polishing. It is an ideal solution for manufacturing plants, metalworking shops, tool workshops, and metal processing facilities where durability, precision, and reliability are essential. The machine’s robust construction is based on a modern cast housing manufactured in accordance with current industrial standards and a rotor equipped with high-quality NSK bearings, ensuring exceptionally quiet and smooth operation. Thanks to the tapered spindle thread, various types of polishing discs—from soft to hard—can be mounted quickly and securely, depending on the machining process. Ljdeyb Hu Aspfx Ac Isab This industrial polisher is equipped with a 0.9 kW motor, providing a substantial power reserve and reliable performance even under demanding production conditions. The applied technical solutions make the SP250 model an extremely versatile tool—serving both as a satin finishing machine for matting and satinizing surfaces, and as a polisher for achieving a high-gloss finish. If you are looking for a solid and versatile device, CORMAK satin finishing machines are a choice that meets the expectations of even the most demanding professionals. Key features: Industrial disc polisher Satin finishing machine for matting, deburring, and surface finishing NSK bearings – reliability, quiet operation, long service life High-quality cast housing – durability and structural rigidity Powerful 0.9 kW motor – performance for professionals Technical parameters of the SP250 satin finisher Polishing disc diameter: 250 mm Polishing disc thickness: 26 mm Polishing disc bore: 16 mm Maximum rotational speed: 2850 rpm Motor power: 0.9 kW Voltage: 400 V Dimensions: 570 × 300 × 380 mm Weight: 22.2 kg

Year of construction: 1976, condition: ready for operation (used), Grinding length: 1500mm, grinding width: 400mm, max. working height: 500mm, vertical movement: 520mm, table dimensions X/Y: 1600mm/350mm, table longitudinal movement: 2050mm, grinding segments: 12, grinding segment dimensions X/Y/Z: 80mm/25mm/150mm, machine dimensions X/Y/Z: approx. 6100mm/2400mm/2250mm, weight: approx. 8500kg. Documentation available. An on-site inspection is possible. Lajdpfx Acsyypk Sj Iob