Heating system

Mawera FU350RIA

Condition: excellent (used), Year of construction: 2003, operating hours: 123 h, functionality: limited functionality, heating capacity: 350 kW (475.87 HP), nominal heat output: 350 kW (475.87 HP), temperature: 95 °C, MAWERA FU350RIA – Fully automatic heating system with underfeed stoker – 350 kW – Year of manufacture 2003 Manufacturer: MAWERA Type: FU350RIA Year of manufacture: 2003 Rated output: 350 kW Heating system: Fully automatic biomass heating system with underfeed stoker Heating medium: Hot water Maximum supply temperature: 95 °C Scope of supply: Boiler body Fpjdpfx Akozi Hibevek Combustion chamber with heat exchanger Ash separator Flue pipes for connection to the chimney Flue gas fan Discharge system Stoker screw (conveyor screw) Casing LOGIC control system Electrical control cabinet Operating and maintenance manual Condition The system is in good technical condition and has already been professionally dismantled. The combustion chamber is in perfect condition and shows only minimal signs of wear. The photos were taken before the dismantling. An inspection can be arranged at any time in Szentendre, Hungary, after prior appointment. This high-quality MAWERA biomass heating system is ideal for industrial and commercial enterprises, wood processing companies, agricultural operations, and district heating systems. Thanks to its robust design, fully automatic control, and excellent condition, it represents an economical and reliable solution for long-term use.

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg Fpedpfow I R Rnex Akvek *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 2001, Mawera wood chip heating system FU 350 RIA, underfeed firing system, output 350 kW, year of manufacture 2001, including feed screw with flashback protection, including control system, including dust collector with flue gas fan. System is fully functional; hopper discharge system is not included! Fjdpfjvyrwpox Akvjpk

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Fodownfwqspfx Akvepk Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg Fpsdpeb Nulhofx Akvek 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm Fsdpfx Ajx Rqtiekvopk - N. 6 cylinders - Boiler with hot water - wooden waste

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Fpodpfx Akjw Tk Udevsk Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. Fpsdpfx Aksxzxuasvek - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Manufacture: Seital Model: SE05X Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Fodpfxewa Iz Ao Akvepk Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) * Fpedsu Nwl Uepfx Akvjk