Used Creasing And Perforating Machine for sale (95,696)

Condition: good (used), Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Table length mm 1240 Gbedpomk T Uiofx Afiju Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Gedpfoh U Nzpsx Afisbu Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Manufacturer: ELDRUT SYSTEM, Kielce, Poland Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Power Supply: 400V, 50 Hz Certification: CE Gjdpfx Afewu Di Eeiobu The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-261-06-1218, Machine available from end of November 2025 Very good condition (located in a training workshop) Panel thickness: 8 - 40 mm Minimum workpiece width: 60 mm Minimum workpiece length: 160 mm Edge thickness (fixed length): max 5 mm Edge thickness (coil): 0.4 - 3 mm Feed speed: 9 m/min Total machine length: 3,075 m Weight: approx. 860 kg Gluing unit with bottom-mounted glue pot Glue roller with synchronous and counter rotation Electronic temperature control Automatic edge magazine with guillotine knife for up to 3 mm edge thickness Pressure zone with powered pressure roller and finishing roller Trimming unit with 2 motors Flush/radius milling with 2 motors Radius scraper (currently R=2 mm) Buffing unit with 2 motors Gbodpfxsxm Ug Ns Afieu Central upper pressure adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST Godehpuhtspfx Afiobu There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a R-PRO 25 standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) - Ribbing Attachments (Optional) - Dijital Encoder (Optional) - Circular Saw (Optional) - Guillotine Shear (Optional) - Sliding Shear (Optional) Please contact us for more information and prices...

Condition: ready for operation (used), Year of construction: 2001, total width: 7,200 mm, total length: 21,000 mm, MAN ROLAND 705 3B year 2001 Total number of prints 199 million Sheetfed offset machine - Printing units: 5 +L Inline machine 5 printing units and sixth inline varnishing unit Tresu High pile exit and entry with automatic integrated logistics Technical features: Speed ​​15,000 copies/h Max paper format 740 x 1040 mm Min paper format 340 x 480 mm Thickness 0.06-1 mm Print format 715 x 1020 mm Plate format 785 x 1030 mm Thickness 0.30 mm Accessories included: •⁠ ⁠Flow feeder with suction belts in addition to PIAB suction system to bring more air to the suction for thicker cardboard supports •⁠ ⁠Preset (automatic setting of paper format and thickness) •⁠ ⁠Electronic double sheet detection •⁠ ⁠Electromechanical double sheet detection sheet •⁠ ⁠Electronic sidelay control, photoelectronic and acoustic •⁠ ⁠Antistatic on feeder and delivery •⁠ ⁠RCI machine control and diagnosis via monitor console / self-diagnosis, control console and monitor; remote inking; dampening; axial, circumferential and diagonal register control with light pen; daylight illuminator and memory card for job storage •⁠ ⁠Fully automatic APL™️ plate change •⁠ ⁠Remote-controlled circumferential, lateral and diagonal register •⁠ ⁠Rolandmatic continuous dampening system with alcohol dosing; Technotrans Beta D cooling and recirculation system •⁠ ⁠GRAPHO METRONIC Tempcontrol NT ink temperature control roller cooling. •⁠ ⁠Programmable automatic blanket cylinder washing •⁠ ⁠Programmable automatic roller washing •⁠ ⁠Grafix anti-set-off powder sprayer •⁠ ⁠Seccomatic IR oven •⁠ ⁠Tools, documentation •⁠ ⁠Complete with all standard components and accessories Gedpfsxhfa Nex Afijbu Elevated 550 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 11/2027, Dough kneading machine Model: SP 6 Protective grid with shutdown Table machine Spiral kneader for max. 6 kg of dough Infinitely variable speed DGUV V3 tested Connection 220V Dough machine NEW with 12 months warranty Gjdpfjf Etmtsx Afiobu Come to our sales center with baking equipment and many bakery machines.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: Gbjdpfx Aoxl Ufvsfiou - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! Gedpfx Aoxl Hpaofiebu € 1,850.00 EX VAT!

Condition: excellent (used), Robland multi-purpose machine — a classic among combination machines Thicknesser: - width: 31 cm - max. height: approx. 220 mm Gbjdpfx Afexl Ahfjieu - 3 Tersa knives - 1 feed speed Planer: - width: 31 cm - table length: approx. 130 cm - 3 Tersa knives - tilting, angle-adjustable fence Spindle moulder: - 30 mm spindle diameter - 2 speeds - side carriage - adjustable fence Circular saw: - adjustable height and tilt (0–45°) - max. blade diameter: 250 mm - side carriage: 205 cm - ruler/guide on side carriage Machine is fitted with 3 motors of 2.2 kW each Power supply: 380V Used machine — very good condition, ready for operation Solid multi-purpose machine.

Condition: good (used), Year of construction: 2010, RANDEK BS20 BUTTERFLY Tables 4 Pc. Measueres : L 4500 mm x H 2300 - 3800 mm Gbjdsxlz I Ropfx Afisu Working hight : 650 mm Can work items up to : 6000 mm on each table, Can stand in line and work items up to 12000 mm Still connected to power, can be examined in working condition.

Condition: new, Year of construction: 2025, 1,000 x 1,900 x 2,000 mm powder stove, manufacturer Kigo O.E.! 1 Internal dimension length 2.000 mm 2 Internal width 1.900 mm 3 Internal height 2,000 mm 4 Outer dimension incl. thermoblock length 2,300 mm 5 Outer dimension incl. thermoblock width 2,300 mm 6 Outer dimension incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 Walls 1 set of 1 mm galvanized sheet metal on both sides, outside RAL 5005 9 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 10 Oven floor 2 run-in rails for oven trolleys 11 Temperature 220°C 12 Fans 1 unit 6,000 m³/hour 13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 Hinged doors on one side 2 insulated with rock wool 150mm 70Kg/m² Indirect heating via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 16 burners 1 oven is electrically heated Gjdpfx Aebqk Nbefijbu 1 exhaust air 1 piece device for exhaust air pipe, manual flap guide 2. powder coating booth (open spray booth) The overspray during powder coating is collected by the suction unit. The powder spraying booth is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the cabin. 1 Powder booth dimensions Width 2,454 mm Depth 2,400 mm Height 2,500 mm 2 Fan 1 pc. 6,000 m³/hElectric motor 3.0 kW 3 Filter Φ 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 3. powder coating system Wagner, - Prima Sprint - 1 Dimensions of the Prima Sprint Depth 725 mm Width 480 mm Height 1.100 mm Weight Approx. 39 kg. Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour - Corona hand gun PEM-C4 Ergo - EPG-Sprint control unit - Conveying unit with fluid crown ST 550/10 - Powder injector PI-F1 - Device trolley with agitator table

Condition: excellent (used), feed length X-axis: 6,000 mm, THREAD and WORM MILLING MACHINE Make: WMW WANDERER Gbedpfx Afswnw N Soiju Model: 31L6000 Thread and worm Milling length: 6000 mm Other Info: Machine complete in all its parts and accessories (change gears and more)

Condition: used, Year of construction: 1999, functionality: fully functional, paper weight (min.): 80 g/m², paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, The machine is in proper working condition and fully functional. The black-coloured rollers are due for overhaul. It comes with a perforator (turner) that is operational. Gedpfow Sd A Sox Afijbu

Condition: used, Used machine Gbjdpfx Afjwwxykjiju

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Gedpfx Afour N Ewjijbu

Condition: used, Year of construction: 1996, functionality: fully functional, Industrial bag sealing and closing device consisting of two unites: 1) polyethylene bag sealing machine Manufacturer - Bag Treatment Holland BV, Netherlands (former company name) Year of manufacture - 1996 Model BTH SLS-350 Designed for sealing of polyethylene bags or polyethylene inner liners in paper bags. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Bag height, temperature and sealing time are adjustable. The machine is fully equipped, in good condition, is technically efficient. Manual instruction and a wiring diagram (in Dutch/German) are included. 2) bag closing unit for closing (sewing) of the paper bags Manufacturer - Fischbein S.A, Belgium Year of manufacture - 1995 Model - 91 Gedpfjxlcm Iox Afiobu Intended for final closing, i.e. sewing, of the paper bags with open top. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. Manual instruction and a wiring diagram are included. The device is characterized by high efficiency combined with easy and simple operation.

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Gjdpfxeu Szuce Afijbu Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Gbjdpfxovfxw He Afisu Format: 330 mm Equipment: cutting thickness 40 mm

Condition: excellent (used), Year of construction: 1996, total height: 3,800 mm, ram adjustment: 100 mm, total width: 2,300 mm, total length: 4,000 mm, table length: 1,250 mm, table width: 900 mm, Decoiler DREHER Type 2370 BFPS YOP 1996   Straightning DREHER KMV 400 YOP 1996 Gsdouql Ulepfx Afijbu Capacity Kg: 125000 Table Length: 1250mm Table Width: 900mm Ram adjustment: 100mm Strokes: 30 - 180Min. Length: 4000mm Width: 2300mm Height: 3800mm Weight: 23080kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Gedpoxhgk Ajfx Afisbu Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Gbsdpfx Afeur N Daeiou The machine is ready for immediate use!

Condition: excellent (used), Year of construction: 1999, Excellent preservation, fully restored. We speak German English and exYU languages. Contact possible also via watsApp Godpfx Afet Ng E Njiobu

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Gedpfx Ajvnwf Uefiobu Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: excellent (used), Year of construction: 2011, operating hours: 7,600 h, functionality: fully functional, Vacuum filler Handtmann VF 608 Plus Year of manufacture: 2011 Operating hours: 7600 Service: New Accessories: Twisting gearbox, nozzles, operating manual Shipping possible Gbjdpoxg Nclsfx Afiou