Used Creasemaster Plus for sale (5,230)

Condition: good (used), Mohr 66 Plus Polar Guillotine This machine is ready for production, after a complete overhaul, and in like-new condition. Manufactured in 2016. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 660mm Stack height: 80mm Machine weight: 620kg Power supply: 380V Godjxmu Umopfx Afieuh Equipment: Programmer with an 18.5″ display and the ability to store 1998 programs Chrome-plated table Photocells Air table Intuitive operation Documentation, tools.

Condition: new, Year of construction: 2019, functionality: fully functional, overall weight: 15,000 kg, input voltage: 380 V, Complete sawmill MEBOR 1200 PLUS Gsdpfx Afew Ahwveisuh ZERO hours working Railway 13m length 55kw motor 3 arms chain turning logs Logs ramp with 4 arm chain Roller conveyor Transfer chain conveyor Multiblade saw with one movable blade Sharpening machine Full Complete line

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, lifting height: 3,000 mm, fuel type: diesel, power: 39 kW (53.03 HP), Empty weight: 3.680 kg Lifting capacity: 2.500 kg Maximum passing height: 207 cm CE mark: yes Technical condition: very good Visual appearance: very good Gusdpfxsxkrv Ao Afish Please contact Tobias Mayr for more information

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Gujdpfxow Iwgcj Afieh Forklift available for loading

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Guedpfxjwi Sulo Afioh Constr. year: 2016 diameter range: 14-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: good (used), 1 set of twist drills 1 x diameter 24 mm 1 x diameter 32 mm 1 x diameter 34 mm 1 x diameter 38 mm 1 x diameter 50 mm 1 x diameter 60 mm 1 x diameter 70 mm (TITEX Plus NEW! Second from the right in picture) Gedpfewz Imujx Afisuh 1 x diameter 70 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Gedsqzx Dbopfx Afiouh Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: used, Container ZETA Plus with filter Model: 12 ZPC 2 Material: 316 L Max. operating pressure: 5 bar Temperature: 90 C° Weight: 110 kg Gedpfsb Tfw Nox Afijuh

Condition: used, Reamers, twist drills, drill bits, spiral countersinks, three-edged bits, twist drills -Three cutter -Diameter: 17.75mm -usable length: 150 mm -Recording: MK2 -Type: HSSE -Number: 19 pieces Guodpfjb A Rb Hsx Afish -Sale: only complete -Weight: 6 kg

Condition: used, functionality: fully functional, In this offer you buy a used UV LED flatbed printer ‘Mimaki UJF-7151 plus II ’ Object of sale: 1 x Mimaki UJF-7151 plus II with the following equipment: from 06/2021 Condition: Godpfowfqbiox Afiouh This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may show. The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2022, 034 USED Tunnel oven for Arabic bread, pita oven. The oven can be fired with gas or heating oil. Year of manufacture: 2022 The price does not include the burner. EXTERNAL DIMENSIONS (in cm): Gusdpfx Aevxkpuofieh - L: 500, - W: 150, - working width/belt 80. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: ready for operation (used), Condition Used Stock Number 39363 Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Guodpfxowgtm Rj Afieh Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: used, Machine reamers, reamer, reaming tool, fitting knife blade set, rivet reamer, rivet reamer -different manufacturers: TITEX PLUS, UNISTO... Gusdpfjcbyzxex Afieh -Recordings: MK2/MK3/MK4 -different sizes: 13-40 mm as shown in the photos -Sale: only complete -Weight: 11 kg

Condition: excellent (used), Year of construction: 2023, 978 USED tortilla line by Bplus/Bakeres. There is a possibility of delivery, assembly, start-up, technology. Warranty: 12 months. TECHNICAL DATA: - capacity 2000-4000 pcs/h - diameter 15-30 cm - weight 40-140 g. EQUIPMENT: Gsdpfxevc T Syo Afiouh - bowl tipper - divider - pre-proofer - hot press - tunnel oven. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW Gusdpfx Asv Dtfvefioh - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: used, Year of construction: 2006, Capacity 300/185cm Godpewy Dlksfx Afijuh 1.5kw hydraulic unit 380V Digital display

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling Gjdpev Stfrefx Afiouh touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Guodpfxjv Hqnts Afieh Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: used, Tuchel Plus rotating brush for cleaning roads and yards complete with control unit. Please contact us to make an appointment in order to better organize access to the company. For further information, technical clarifications and to know the selling price of the vehicle, please contact our sales managers directly, at 045-7950955. N.B.: Please note that the description of the vehicle is to be considered indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact correspondence of the characteristics of the vehicle before proceeding with the purchase. The company Psl Autocarri Srl declines any responsibility for any errors and inconsistencies contained in this descriptive sheet. Gedsu S Nmgopfx Afijuh N.B.: WE ONLY RESPOND TO REQUESTS FOR INFORMATION CONTAINING THE NAME AND TELEPHONE NUMBER OF THE APPLICANT

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Gjdjxnwy Iopfx Afiouh Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of the processed element 230mm - max. height of the processed element 130mm 7 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 130mm 5.5kW 3) vertical left 130mm 5.5kW 4) horizontal upper 230mm 7.5kW 5) horizontal upper 230mm 11kW 6) horizontal lower 230mm 18.5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal, torsionally driven, pulling rollers, including 2 double rollers - 4 rubber, pulling, output rollers from above - 2 top pressure - pawls from below - 3 side pressures from below - 2 smooth, pulling metal rollers from below - 2 double, pulling, rubber rollers from below - pneumatically pressed rollers - feed on Cardan rollers - smooth feed speed adjustment 5-36m/min - 4kW feed motor - electric planing thickness adjustment 0.75kW - length of the input table 1980mm - closed in the cabin - central table lubrication - diameters of the extraction nozzle 5x120mm, 2x150mm - dimensions L/W/H 5500x1840x1900mm - weight about 5000kg Gjdshfl T Iopfx Afisuh ADVANTAGES - Italian production - 7 heads - for wet and dry wood - last universal spindle - unpainted - used planer, very good condition Net price: PLN 146900 Net price: EUR 34570 depending on the price of EUR 4.25 (Prices may vary depending on higher fluctuations)

Year of construction: 2010, condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Gujdpfeiy D Tmex Afioh Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm Godpfxscnxa No Afieuh max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,269 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,700 mm, fork length: 1,200 mm, empty load weight: 899 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Gujdsxnkxwjpfx Afijh Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards, ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and consult on-site now – we will find the right solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: High Lift Pallet Truck ERD 220 drive Plus - Drive type: Electric - Load capacity: 2,000 kg - Year of manufacture: 2018 - Operating hours: 4,269 - Lift height: 2,010 mm - Mast type: Duplex - Free lift: No - Initial lift: Yes - Overall length: 2,700 mm - Overall width: 750 mm - Overall height: 1,700 mm - Fork length: 1,200 mm - Unladen weight: 899 kg - Load centre: 600 mm - Tyres: Polyurethane - Model designation: ERD 220 drive Plus - Battery type: Gel - Battery weight: 402 kg

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,236 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: gasoline, mast type: duplex, construction height: 1,430 mm, fork length: 1,200 mm, empty load weight: 899 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS AT WORK Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards, ensuring maximum quality and your safety. From the chassis to the battery, including drive unit, brakes, steering, and electrics – every vehicle is thoroughly inspected and serviced. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site and receive expert advice – we’ll find the right solution for you. Gusdpfsxnkw Hex Afieh Industrial Truck Data: Manufacturer: Jungheinrich Model: High-Lift Pallet Truck ERD 220 drive Plus Drive type: Petrol Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 6,236 Lift height: 2,010 mm Mast type: Duplex Free lift: No Initial lift: Yes Overall length: 2,500 mm Overall width: 720 mm Overall height: 1,430 mm Fork length: 1,200 mm Unladen weight: 899 kg Load centre: 600 mm Tyres: Polyurethane Model designation: ERD 220 drive Plus