Used Creasemaster Plus for sale (5,319)

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Bdjdpfx Abju Ekw No Tok Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min.

Condition: good (used), mileage: 346,905 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 6x2, wheelbase: 4,330 mm, first registration: 12/2019, fuel tank capacity: 105 l, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, power assisted steering, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Automatic dipped headlights - Passenger bench seat - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden slat interior lining Bdedpfxoxz Rlks Ab Tjk - Height-adjustable steering wheel - Wireless charging for mobile phones - LED daytime running lights - Front center armrest - Rain sensor - Side door - Advertising (applied vinyl) - Partition wall with window = Further Information = General Information Number of doors: 2 Cab type: single cab Registration: VDT-06-X Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission Transmission: 6-speed manual gearbox Axle Configuration Front axle: Max. axle load: 1,850 kg; Steering Middle axle: Twin tyres Maximum rear axle load: 2,800 kg Dimensions Width: 209 cm Weights Empty weight: 2,349 kg Payload: 1,151 kg Gross vehicle weight: 3,500 kg Functional Tail lift: D'HOLLANDIA DHLM10, tailgate, 1,000 kg Fuel Consumption Average fuel consumption: 8.6 l/100km Urban fuel consumption: 8.9 l/100km Extra-urban fuel consumption: 8.4 l/100km Maintenance, History and Condition APK (Roadworthiness Inspection): valid until 09.2026 Technical condition: good Visual condition: good

Condition: used, Year of construction: 2014, operating hours: 5,000 h, functionality: fully functional, overall weight: 3 kg, total length: 500 mm, total width: 500 mm, total height: 200 mm, input voltage: 24 V, input current: 4 A, type of input current: DC, for sell ̶1̶.̶F̶A̶N̶U̶C̶ ̶A̶1̶3̶B̶-̶0̶2̶0̶2̶-̶B̶0̶0̶2̶,̶ ̶1̶5̶i̶n̶c̶h̶ ̶p̶a̶n̶e̶l̶ Bodpfxswq Dpdj Ab Tedk 2. FANUC STAND ALONE Control Unit - A02B-0323-B804 with 4 options: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) A20B-8101-0770 (ETHERNET CD38R) A20B-8101-0770 (ETHERNET CD38R) ----- 3.Keyboard for FANUC - A02B-0323-C231 you can buy separately

Condition: good (used), axle configuration: 1 axle, first registration: 10/2022, loading space length: 5,600 mm, loading space width: 2,260 mm, loading space height: 2,350 mm, total length: 5,820 mm, total width: 2,530 mm, total height: 3,450 mm, suspension: air, tire size: 205/75R17,5, wheelbase: 2,330 mm, color: other, Year of construction: 2022, Number of axles: 1, Payload: 1,770 kg, Unladen weight: 1,730 kg, Gross weight: 3,500 kg, Chassis type: Full chassis, Chassis material: Steel = Further Information = General Information Cab: Day cab Registration number: OT-06-JY Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 205/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 7 mm; Tyre tread right: 7 mm Weights Unladen weight: 1,730 kg Payload: 1,770 kg Gross vehicle weight (GVW): 3,500 kg Functional Bjdpfjxypw Nox Ab Todk Loading platform height: 100 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none Financial Information Lease price: €722 per month (panel van, 72 months); Please enquire for further information and conditions

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 350 kg, lifting height: 13,800 mm, empty load weight: 3,660 kg, construction height: 2,600 mm, fuel type: electric, total length: 2,780 mm, drive type: Elektro, construction width: 1,410 mm, Scissor lift Mast type: None Technical condition: very good Front tyres type: Cushion Front tyres size: 15x5 Front tyres condition: 80–100% Bdedpfexrwr Esx Ab Tek Rear tyres type: Cushion Rear tyres size: 15x5 Rear tyres condition: 80–100% Battery voltage: 12V Battery capacity: 140Ah Battery condition: New CE certificate, safety light,

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / Bedpjxyl Tgjfx Ab Tjdk This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit Bjdpfx Ascnxa Nob Todk scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: used, Tenoning spindle 1 St. Number of milling agregates 0 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine Bdedpfsxa Hi Nox Ab Tok -Corner and shear bearings + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping ----- (Technical data according to manufacturer - no gua...

Condition: new, Year of construction: 2003, cutting diameter 400 mm dimensions of saw-band 4300 x 34 x 1,1 mm Bedpfx Aboxpi Ads Todk cutting speed 15 - 90 m/min 400 mm stroke back stop 400 mm cross-slide 460 x 400 total power requirement 3,0 kW weight of the machine ca. 1,35 t dimensions of the machine ca. 2,3 x 1,4 x 1,4 m

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Bsdpfjxykn Njx Ab Tjdk Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg

Year of construction: 2020, condition: good (used), MINIMAX is a robust semi-industrial machine designed for use in bakeries and confectioneries of any size. The production capabilities of the device are divided into 5 groups, within which up to 99 programs can be stored. The use of a head lifting and lowering mechanism (unlike similar devices), with a stationary conveyor table, allows for expanded functionality (e.g., by adding mobile tables of any length). MINIMAX can operate at up to 40 cycles per minute. Technical specifications: Manufacturer: JEREMY Model: MINIMAX UNO PLUS 60A Tray width: 60 cm Hopper capacity: 40 L Machine dimensions: 75 x 120 x 165 cm Bdjdsxz Dvvepfx Ab Tsk Year of manufacture: 2020 Power supply: 230 V Installed power: 2.4 kW Weight: 350 kg Condition: used, operational

Condition: like new (used), Year of construction: 2011, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 121115483, Kilia 65 Liter Meister Plus Vario Knee and Touchscreen Operation. The machine has been factory overhauled in 2024 6 months warranty Bdsdpsxz Dgnsfx Ab Tek Continuously variable knife shaft drive (50 – 5100 rpm) Mixing forward and reverse with reverse operation (50 – 500 rpm) and continuously variable bowl drive (7 – 20 rpm) Centralized lubrication for the knife and bowl shaft bearings Noise protection cover, manually operated knife cover Stainless steel, rustproof, 1 six-piece knife head Electric knife shaft brake Electric thermometer with automatic shut-off Electric speed counter with automatic shut-off Touchscreen with splash guard lid Knife shaft drive power 22.5 kW, 400 Volt Bowl drive power 1.5 kW, 400 Volt

Condition: used, Year of construction: 2015, Perfecta Bookline Plus Perfect Binding Machine Bedpfxjxz A Tms Ab Todk Number of Clamps: 5 clamps Mechanical Speed: Up to 2,000 cycles/hour (or approximately 1,800 books/hour depending on configuration) Max Book Size (WxH): 430 x 320 mm (approx. 16.9 x 12.6 inches) Min Book Size (WxH): 110 x 105 mm (approx. 4.3 x 4.1 inches) Book Thickness (Spine): 6 – 40 mm (approx. 0.24 - 1.57 inches) Control Interface: Color touchscreen monitor with Navigator SE UI for motorized/automatic settings Feeding: Hand feeding station with jogger; automatic cover feeder (top-loading) with scoring Spine Preparation: Milling and roughening station with dust extraction system Counter: 5 mios

Condition: used, axle configuration: 4x4, Year of construction: 2021, operating hours: 1,665 h, Equipment: all wheel drive, Drive: Wheel Rental currency: EUR Bjdpfx Asu Hwcbeb Tjdk Please contact Jan De Lepeleer for more information

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Bdsdpfx Abovvkq Te Tjk Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Bodpfx Asxykm Sjb Tsdk Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: used, Year of construction: 2007, operating hours: 7,800 h, Rigid telescopic forklift Mast type: None Bdodpfx Abow Dkzgj Tok

Condition: repair required (used), For sale is a UVA 725 Plus, year of manufacture 2011, a compact and exceptionally robust vertical CNC machining center from the Hommel-Unverzagt Group – equipped with a Heidenhain TNC 620 control system and SK40 spindle taper. The machine was in production until recently, but currently does not boot fully due to a control error (CC unit). Technical Data Travels: X-axis: 725 mm Y-axis: 460 mm Z-axis: 460 mm Spindle: Speed: 10,000 rpm Tool holder: SK40 Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool magazine: Capacity: 24 slots Tool change time: approx. 2 s Table: Dimensions: 760 × 420 mm Max. table load: 400 kg Machine dimensions (L×W×H): approx. 2200 × 2100 × 2300 mm Weight: approx. 3600 kg Condition & Fault Description: Bjdpfx Abjxzvnwj Tsdk The machine was running flawlessly until recently but now displays various axis configuration and CC/PLC errors at startup: Heidenhain TNC 620 errors include: - “Timeout during processing of CC command” - “The PLC program has been stopped” - “HSCI initialization faulty” - “HSCI Ethernet connection interrupted” - “Configuration of axis X/Y/Z/S faulty” The Command/Control unit (CC) has already been replaced, but the error persists. Therefore, the machine is offered as defective / for repair or as a source of spare parts. Accessories & Scope of Delivery: - Several SK40 tool holders (various sizes, collet chucks, end mill holders, etc.) - Chip conveyor (complete unit) - Machine frame / chip drawer / collecting trays - Hydraulic unit / coolant pump - Machine documentation Documentation includes: - UVA 725 Plus Parts Manual - Operating Manual Heidenhain TNC 620 - Delivery / Preparation / Installation Guide (UVA 550–1600) - Heidenhain TNC 620 User Manual (large folder) Machine Data (according to nameplate): Model: UVA 725 Plus Serial number: 71L1261109 Year of manufacture: 2011 Manufacturer: Hommel Unverzagt GmbH Weight: 3800 kg Manufactured for Hommel Unverzagt in Taiwan

Condition: excellent (used), MATSUURA H. PLUS 300 is a Horizontal machining center with high precision, excellent accuracy and reliability. Travels X/Y/Z 500 mm; workpieces Ø 530 mm, h 700 mm; pallets 300×300 mm (10), max workpiece 250 kg, change 7 s. Spindle BT40 50–15,000 rpm, 95.4 Nm, 15/22 kW; feeds 1–50,000 mm/min, rapid 50 m/min; 3×380 V 50 Hz; weight ≈7000 kg; dims 3660×2463×2445 mm. Tool magazine 90 pos., tool change 2 s, chip-to-chip 2.9 s. Coolant 1500 l, chip conveyor, toolholder set, spindle oil cooler. Suited to tight tolerances in automotive, aerospace, medical, watchmaking and mould/die. Bodpfx Aboxyaabs Tjdk

Condition: used, axle configuration: 4x4, Year of construction: 2018, operating hours: 2,760 h, Equipment: all wheel drive, Drive: Wheel Bjdpfx Ajuzd Elsb Tsdk Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: used, Year of construction: 1991, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 6300 x 1200 x 2900 mm Motor power: 5.5 kW Bdjdpfsvvkthex Ab Tek Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Bdodpfx Ajxykm Esb Tsk Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: good (used), Year of construction: 1999, operating hours: 42,733 h, functionality: fully functional, machine/vehicle number: 01500001111, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 70 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 8 rpm, overall weight: 3,200 kg, Completely overhauled by Gildemeister Bielefeld in 2010 Turning diameter: 500 mm Swing over cross slide: Ø 290 mm Turning length: 1,500 mm Bodpfxsxx Uqrs Ab Tedk Spindle speed range: 8 – 2,800 rpm with three gearbox stages Spindle bore approx. Ø 70 mm Three-jaw chuck Ø 250 mm, Röhm Tailstock quill: MT4

Condition: used, mileage: 127,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 07/2020, next inspection (TÜV): 08/2026, emission class: euro6, color: white, number of seats: 5, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6 Panel Van (Combi) Plus 4Motion / All-wheel drive, 110 kW, double cab with 5 seats and optimal equipment, ideal for trades and commercial use. One-owner vehicle. Workshop / shelving installation by ALUCA (details below) Double cab (DOKA, MIXTO), 5 seats All-wheel drive (4Motion, 4M, 4x4, 4WD) Chassis: reinforced suspension and dampers Underrun protection for engine/gearbox, plastic Tow bar with 2.5 t towing capacity Roof rack Bulkhead with window Auxiliary heater / parking heater, programmable Heated driver's seat Climatic air conditioning with pollen filter Comfort driver’s seat with foldable armrests, multi-adjustable: - Seat height, backrest, lumbar support Adjustable single front passenger seat: backrest Three-seater bench in the first row Seat covers: Simora fabric Driver assistance systems: - Rearview camera - Cruise control - Hill start assist - Fatigue detection - Trailer stabilization - Tyre pressure monitoring display - Brake Assist (HBA) - Multi-collision brake - ABS, ASR, ESP Discover Media audio navigation system - Radio CD player - USB, AUX-in, SD card, Bluetooth audio - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Bluetooth hands-free system for mobile phone - Mobile online services Car-Net - Voice control (for satnav, phone, radio...) prepared, can be activated Multifunction display Plus / onboard computer Driver and passenger airbags Electronics package 1: - Electric windows - Electrically adjustable and heated mirrors Central locking with remote control Fog lamps with static cornering lights 2nd battery with cut-off relay Vehicle speed limited to 135 km/h Trendline version Wheelbase 3000 mm Sliding side door (passenger compartment) with dark tinted window Tailgate with dark tinted window Fixed dark tinted glazing, first row, left N1 commercial vehicle registration / van 2.0 L - 110 kW TDI engine 6-speed manual transmission Adjustable steering wheel Front floor: rubber and rubber mats Grab handles on A-pillars Non-smoker package Heat-insulating glazing Dents on sliding door and tailgate Cargo area equipment: Workshop install by Aluca (similar to Sortimo, Bott, Würth). Left and right shelf units: storage compartments, storage bins, small parts containers, 4x drawers. Fold-out vice. Bulkhead with window. Sturdy wooden floor. Cargo securing via lashing rings and rails. Walls and roof panelling. 3x 12V sockets. Bright LED lighting. Ventilation in and out. Cargo space dimensions: - Length at floor: approx. 195 cm, incl. space under rear bench - Length mid-height: approx. 139 cm - Length at roof: approx. 124 cm - Height: approx. 133 cm VW Service History: Bedpfsxzuyxsx Ab Tjdk 11/2020 / 24,397 km: Inspection + oil change 08/2022 / 48,874 km: Oil change 11/2022 / 56,625 km: Inspection 05/2023 / 74,373 km: Oil change 11/2023 / 92,237 km: Inspection 04/2024 / 102,720 km: Oil change 08/2024 / 115,700 km: Front and rear brake discs and pads replaced 11/2024 / 123,351 km: Engine oil change + all-wheel coupling oil (Haldex oil) + brake fluid change Currently mounted tyres: Winter tyres 215/60 R 17 on steel rims with approx. 6 mm tread front and approx. 5 mm rear Additional tyres: Summer tyres 215/65 R 16 on steel rims with approx. 3/3/4/4 mm tread. Despite careful preparation, errors in vehicle description and images may occur during data entry and transmission. Subject to errors and prior sale.

Year of construction: 2007, condition: good (used), Model: Wittmann TP PLUS 2 160 (year 2007) Type: Pressurised circulating-water mold tempering unit, dual zone (2 zones) Controller: Microprocessor temperature control with ±0.2 °C accuracy Heating capacity (typical): ~9 kW standard (option up to ~12 or 16 kW) Pump (standard): ~0.5 kW magnetically-coupled pump, max ~4.5 bar, ~40 l/min Pump (enhanced): ~1.0 kW, max ~6 bar, up to ~60 l/min Mold water connection: G 3/4″ Cooling water connection: G 3/8″ Bsdpfxjxyi Sye Ab Todk Power supply: 3 × 380-415 V / 50 Hz