Used Crankshaft Milling Machine for sale (64,917)

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Bledpfexc Rmqex Ak Esg Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, functionality: unexamined, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Blodpfx Akey Hf Aqo Esg Weight approx.: 1 t

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We offer you: Manufacturer: Deckel Maho Model: FP4M special edition Year of manufacture: 2022 Control system: Heidenhain ND 7013 digital readout Technical data: Travel distances: X-axis: 500 mm Y-axis: 530 mm Blsdey Hfqujpfx Ak Ejg Z-axis: 400 mm B-axis: swiveling ±90° (180°) Main spindle: Tool holder: SK 40 Spindle speed range – main spindle: 25 – 3,000 rpm Drive power – main spindle (100/40%): 6 kW Worktable: Table size: D 800 x 480 mm Feeds: Feed range: 6 – 500 mm/min Rapid traverse (x/y/z): 1,500 mm/min Space requirement (W x D): approx. 2,235 x 1,875 mm Machine weight: approx. 1,600 kg with worktable and milling head Technical features & accessories: - With additionally adjustable milling head on the Y-axis (130 mm) Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Vertical Drilling and Milling Machine Blsdoy Hflropfx Ak Eeg Stock number: 3083 Manufacturer: Sempuco Greiz Year of manufacture: 1956 Type / Model: Midrimat 3 Machine number: 3545 Travel (x-y-z): 320 - 150 - 350 mm Spindle taper: MT3 Spindle feed: 0.042 mm/rev Quill stroke: 60 mm Table size: 660 x 310 mm Clamping surface of the table: 450 x 200 mm Head travel: 150 mm Speed range: 190 to 2,100 rpm Feed rate: 11.2 to 125 mm/min Spindle taper: MT3 Connection: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.65 t Footprint: 800 x 600 mm Dimensions: 900 x 1,100 x 1,700 mm

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, input voltage: 380 V, We offer this used Deckel Contour 3 tool milling machine, year of manufacture 1987. Control system: 6004 50 009302 00 Serial number: 20031 Year of manufacture: 1987 Wiring diagram: 6003 90 077302 00 Bodpfjy Hfc Rex Ak Eelg Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 23 A Control voltage: 24 V Maximum fuse: 35 A The machine is equipped with a rotary table and a tool changer. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Bledoy Dvnxopfx Ak Eeg

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Bljdpfxoyrhb Se Ak Esg Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20404, elumatec AF 222 For machining transoms and door profiles made of aluminium or plastic Manual feed of the routing unit Large cutting range of up to 400 mm Continuously adjustable table height The material stop can be pivoted up to 60° to the left and right. Notching up to 30° (acute angles, left and right). Detent at 90° with index pin. With quick tool change system and "Spindle Lock" for easy tool changing Precise, smooth-action and low-wear recirculating ball guides Horizontal and vertical pneumatic material clamping provides flexibility Depth stop for four different notching depths Pulsed coolant system Cutting tool diameter max. 280 mm Cutter bore 40 mm Profile height max. 165 mm Cutting height 145 mm Cutting depth 110 mm Cutting length 400 mm Spindle speed 2,800 rpm Travel 550 mm 2.5 kW of power at 400 V / 50 Hz Compressed air supply 7 bar Power output 2 kW Air consumption 10 l per working cycle, 20 l with minimum-volume lubrication system Length 1,540 mm, depth 905 mm, height 1,000 mm, weight 248 kg Machine is ready for operation. Tool was sharpened Bjdpfx Ajy Hcb Dek Eolg

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED Bledpfx Akoy Hb Uie Eeg VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: good (used), Year of construction: 2008, functionality: fully functional, ANAYAK HVM-11000-PC - Condition: Used machine - Year of manufacture: 2008 Control system: - HEIDENHAIN iTNC530 Linear axis travel distances: - X-axis: 10,300 mm - Y-axis: 2,000 mm (cross axis) - Z-axis: 2,700 mm Machine table: - Dimensions: 11,000 x 2,000 mm - T-slots: 8 x 22 - Capacity: max. Bjdpey Dr Risfx Ak Eslg Axis speeds: - Max. feed rate X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 rpm - Max. motor power: 37/51 kW - Tool holder: ISO 50 (DIN69872-B) Coolant and chip disposal: - Chain conveyor for chips, longitudinal direction - Through-spindle coolant, 22 bar Other equipment features - Travelling operator platform - Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, ANAYAK HVM-3300 - Condition: used machine - Year of manufacture: 2004 Control system: - HEIDENHAIN iTNC530 Linear axis travel: - X-axis: 2,700 mm - Y-axis (cross axis): 1,000 mm Blodjy Dr Axspfx Ak Ejg - Z-axis: 1,050 mm Machine table: - Dimensions: 3,300 x 1,000 mm - T-slots: 7 x 22 mm - Capacity: max. Axis feed rates: - Max. feed X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 rpm - Max. motor power: 22/30 kW - Tool holder: ISO 50 (DIN69872-B) Cooling and chip removal: - Longitudinal chain conveyor - Through-spindle coolant, 19 bar Additional features: - Movable control console in front of the machine - Enclosure with front doors - Machine documentation

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Blsdpfxsw Ebhme Ak Eog Condition: good, workshop-tested

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements Bledpfox Ry Atsx Ak Esg  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: used, Used machine Bjdpfxey Dkgpe Ak Ejlg Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm rapid traverse 10 m/min table dimensions 1.200 x 550 mm spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition Bledpfjy Dh U Dsx Ak Ejg and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Bjdpfjy E S Dlox Ak Eelg

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Blodey E S Dropfx Ak Ejg

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Blsdpfx Aksy E S D So Eog

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Huron Fixed Bed Milling Machine Type SXB 833 Blodpsy Dgh Asfx Ak Eeg Year 1990 Heidenhain CNC Good condition Video available Travels X Longitudinal table travel: 3000 mm Y Cross travel of ram: 1000 mm Z Vertical console travel: 1000 mm

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece probing) Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Bjdpfx Akov Rxa Sj Eslg Weight: 4,000 kg Machine dimensions LxWxH approx.: 3,900 x 2,000 x 2,000 mm

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Bljdpfx Asv Rpr Ssk Esg Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Bedpfx Aoyi A Tdok Eelg Storage location: Nattheim

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm Bljdpfx Akoy E N Dvj Eeg travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Bledpfxoy E I Uyj Ak Eeg Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2009, Available immediately ex location: CNC bed-type milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Bljdpfjy E I Ugox Ak Esg Heidenhain iTNC 530 Table 2700 x 1050 mm Travel ranges X/Y/Z 2600/1000/950 mm Table load 6 t Internal coolant supply (IKZ) 14 bar Hydraulic tool clamping SK 50 spindle taper Spindle speeds 24 - 1600 rpm Spindle drive 25 kW Chip conveyor Weight 14 t Price: €21,000 plus VAT, ex location.