Used Corn Oil Press Machine for sale (96,516)

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Todpfx Aoph Uk Nsf Tjf Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: good (used), functionality: fully functional, Year of construction: 1980, used press brake in good condition, full function Tjdpsunkr Djfx Af Tsf

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97102, type of input current: three-phase, input voltage: 220 V, pressing force: 10 t, compressed air connection: 6 bar, Baier Prägepressen GEBA 4/B Hotstamping Machine Pressing force: 10 tons This machine was used for decorating plastic objects by means of hot stamping technology. Suitable for printing with gold and silver foil. The machine is also equipped for positioning and printing heat transfers. Very robust construction. Works well. The machine is equipped with a sliding table for printing smaller quantities, using a single holding jig. Also included is a Weiss rotary table with eight positions, enabling high production speeds with eight product holders in operation. Todpjxpudgefx Af Tjf

Condition: new, Year of construction: 2025, table width: 1,500 mm, table length: 4,000 mm, pressing force: 600 t, stroke adjustment: 300 mm, warranty duration: 24 months, stroke length: 300 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Extension Plate • 8 Guided Slide Rams • Adjustable Stroke on Single Connecting Rod Tsdjvtxc Sjpfx Af Tof • Slide Balancer Piston • Fully Automatic Fine Lubrication System • PLC Control System • Piano-type Control Panel • Touchscreen LCD Display • Motor Reverse Function • Overload Hydraulic Safety Valve • Motorized Slide Adjustment Mechanism • Light Curtain Safety Barrier • Enclosed Gear Unit in Oil Bath • Dual-coil Safety Valve • Compliance with CE Standards • Production Range for C-Type Eccentric Press from 5 to 300 Tons • Production Range for D-Type Eccentric Press from 60 to 300 Tons • Production Range for H-Type from 150 to 2000 Tons • Country of Origin: Turkey • Warranty Period: 24 Months • Delivery Time: To be specified in the offer. TECHNICAL SPECIFICATIONS: CAPACITY: 600 TON BED (LOWER TABLE) USABLE DIMENSIONS: 1500 x 4000 mm UPPER TABLE USABLE DIMENSIONS: 1500 x 4000 mm FIXED STROKE LENGTH: 300 mm RATED TONNAGE: 10 mm SPEED (SPM): 20-30 MAXIMUM CLOSED DIE HEIGHT: 600 mm MINIMUM CLOSED DIE HEIGHT: 480 mm SIDE WINDOW DIMENSIONS: 1000 x 1000 mm ADJUSTMENT (SLIDE ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 units NUMBER OF ECCENTRIC SHAFTS (CRANKS): 2 units SAFETY VALVE: Hydraulic Safety Valve CONTROL PANEL ELECTRICAL COMPONENTS: SIEMENS - SCHNEIDER LUBRICATION SYSTEM: Automatic Lubrication DISPLAY – PLC – INVERTER: SIEMENS - PILZ SAFETY BARRIER: LEUZE OPERATION SYSTEM: Pneumatic Clutch and Brake Combination DIE MEMORY: 99 programs INSTALLATION TYPE: Floor Mounted BODY TYPE: Monoblock MOTOR POWER: 65 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (LxWxH): 6500 x 5300 x 2500 mm APPROXIMATE WEIGHT: 103,000 kg As a manufacturer, technical specifications can be tailored to your requirements.

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec Tjdpfx Afsgvkmro Tsf return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and Todpfx Aexgi Hqef Tjf processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., Tjdjwdn S Aopfx Af Tof • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm.,

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf Todpfxswlkw Do Af Tef 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Todpfxoxdxbxj Af Tjf Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: new, Year of construction: 2025, table width: 1,500 mm, table length: 3,000 mm, pressing force: 500 t, stroke adjustment: 300 mm, warranty duration: 24 months, stroke length: 300 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • Additional T-Slot Extension Plate • 8-Guided Slide (Ram) • Adjustable Stroke on Single Connecting Rod • Slide Balancer Piston • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touchscreen LCD Display • Motor Reverse Function • Overload Hydraulic Safety Device • Motorized Slide Adjustment Mechanism • Light Curtain Safety Guard • Gear Assembly in Enclosed Oil Reservoir • Dual-Coil Safety Valve • CE Compliance • Production Range: C-Type Eccentric Presses from 5 to 300 Tons • Production Range: D-Type Eccentric Presses from 60 to 300 Tons • Production Range: H-Type Presses from 150 to 2000 Tons • Country of Origin: Turkey • Warranty Period: 24 Months Tsdpfxevtw U Hj Af Tjf • Delivery Time: To Be Specified in Offer TECHNICAL SPECIFICATIONS: CAPACITY: 500 TONS LOWER TABLE USABLE AREA: 1500x3000 mm UPPER TABLE USABLE AREA: 1500x3000 mm FIXED STROKE LENGTH: 300 mm NOMINAL TONNAGE: 10 mm STROKES PER MINUTE (SPM): 20–30 MAXIMUM CLOSED DIE HEIGHT: 600 mm MINIMUM CLOSED DIE HEIGHT: 480 mm SIDE WINDOW DIMENSIONS: 1000x1000 mm ADJUSTMENT (SLIDE ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 NUMBER OF ECCENTRIC SHAFTS (CRANKSHAFTS): 2 SAFETY DEVICE: HYDRAULIC SAFETY DEVICE CONTROL PANEL INTERNAL COMPONENTS: SIEMENS – SCHNEIDER LUBRICATION SYSTEM: AUTOMATIC LUBRICATION DISPLAY – PLC – INVERTER: SIEMENS – PILZ SAFETY BARRIER: LEUZE OPERATING SYSTEM: PNEUMATIC CLUTCH AND BRAKE COMBINATION DIE MEMORY: 99 SETTINGS INSTALLATION TYPE: FLOOR MOUNTED BODY TYPE: MONOBLOCK MOTOR POWER: 55 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x D): 6000x4300x2500 mm APPROXIMATE WEIGHT: 85,000 kg AS THE MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE MODIFIED ACCORDING TO YOUR REQUIREMENTS.

Condition: like new (used), Year of construction: 2007, SPS screen printing stacker model ST2, completely overhauled. Format: 750x1050mm Tsdpfxsxk T E Se Af Tsf Year: 2007 Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the production of UV (electronic) or hot air tunnels.

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Tsdpjttc Uasfx Af Tjf Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch weight 3000 kg good condition

Condition: new, Year of construction: 2025, Equipment: auto duplex, Demo system Revoria Press SC285S Very low print count, as it was only used for demonstrations. Meter reading available upon request. Configuration can be customized as needed. Shown here: SC285S with Fiery SC21 Pink Toner Enabling Kit Tsdoxgqvmepfx Af Tjf Air Suction Feeder C1-DSXL Banner Unit for Air Suction Feeder C1-DSXL Post Card Kit for Air Suction Feeder Envelope Kit for Air Suction Feeder Interface Decurler Module D1 Static Eliminator D1 Charge Corotron Assembly for Static Eliminator Smart Monitoring Gate D1 Finisher D6 with Booklet Maker Banner Print Extension Kit Extra Sale/rental exclusively within Germany! Price on request!

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Tedpfertrx Rsx Af Tjf Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 900 mm, pressing force: 350 t, stroke length: 270 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Extension Plate • 8-Guided Ram • Adjustable Stroke on Single Connecting Rod • Counterbalance Piston on Ram • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touchscreen LCD Display • Motor Reverse Operation • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Photoelectric Safety Curtain • Enclosed Oil Reservoir with Gear Set • Double-Solenoid Safety Valve • Compliance with CE Standards • Our C-Type Eccentric Presses are available from 10 to 300 tons. • Our D-Type Eccentric Presses are available from 60 to 300 tons. • Our H-Type Presses are available from 150 to 2000 tons. • Country of Origin: Turkey • Warranty Period: 24 Months • Delivery Time: Ex-Stock TECHNICAL SPECIFICATIONS: CAPACITY: 350 BOTTOM TABLE USABLE AREA: 1000x900 mm TOP TABLE USABLE AREA: 1000x900 mm FIXED STROKE LENGTH: 270 mm RATED TONNAGE AT: 9 mm STROKES PER MINUTE (SPM): 30–45 MAXIMUM CLOSED DIE HEIGHT: 500 mm MINIMUM CLOSED DIE HEIGHT: 380 mm SIDE WINDOW SIZE: 600x800 mm Todoxnmdpepfx Af Tjf ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 1 pc NUMBER OF ECCENTRIC SHAFTS (CRANKSHAFTS): 1 pc SAFETY DEVICE: HYDRAULIC PANEL COMPONENT ORIGIN: EUROPEAN – LOCAL LUBRICATION SYSTEM: AUTOMATIC SCREEN – PLC – INVERTER: DELTA – PILZ SAFETY BARRIER: REER OPERATION SYSTEM: 4 POSITION DIE MEMORY: 99 pcs INSTALLATION TYPE: FLOOR MOUNTED FRAME TYPE: MONOBLOCK MOTOR POWER: 37 kW MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L × W × D): 5000 × 2000 × 2000 mm APPROXIMATE WEIGHT: 30 – 35 tons

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Tsdpfx Afjw Iq Ugs Tof Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, Year of construction: 2025, table width: 1,400 mm, table length: 2,800 mm, pressing force: 400 t, stroke adjustment: 250 mm, distance table to quill: 850 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Extension Plate • 8-Guided Slide (Ram) • Adjustable Stroke on Single Connecting Rod Arm • Balancing Piston on Slide (Ram) • Fully Automatic Fine Lubrication System • PLC Control System • Piano Type Control Panel • Touchscreen LCD Display • Motor Reversal Function • Overload Hydraulic Safety Device • Motorized Slide Adjustment Mechanism • Light Curtain Safety Barrier • Enclosed Oil Reservoir with Gear Unit • Dual Coil Safety Valve • Compliance with CE Standards • We manufacture C-type eccentric presses from 5 to 300 tons. • We manufacture D-type eccentric presses from 60 to 300 tons. • We manufacture H-type presses from 150 to 2000 tons. • Country of Origin: Turkey • Warranty Period: 24 months Todsvtw Efepfx Af Tsf • Delivery Time: Will be specified in the offer. TECHNICAL SPECIFICATIONS: CAPACITY: 400 tons USABLE LOWER TABLE DIMENSIONS: 1100 x 2300 mm USABLE UPPER TABLE DIMENSIONS: 1050 x 2300 mm FIXED STROKE DISTANCE: 170 mm RATED TONNAGE: 6 mm STROKES PER MINUTE (SPM): 25–40 MAXIMUM CLOSED DIE HEIGHT: 500 mm MINIMUM CLOSED DIE HEIGHT: 350 mm SIDE WINDOW DIMENSIONS: 900 x 900 mm ADJUSTMENT (SLIDE/RAM ADJUSTMENT): 150 mm NUMBER OF CONNECTING RODS: 2 pcs NUMBER OF CRANKSHAFTS: 2 pcs SAFETY DEVICE: Hydraulic Safety PANEL INTERNAL SWITCHGEAR: SIEMENS – SCHNEIDER LUBRICATION SYSTEM: Automatic Lubrication SCREEN – PLC – INVERTER: MITSUBISHI – PILZ SAFETY BARRIERS: LEUZE WORKING SYSTEM: Pneumatic Clutch and Brake Combination DIE MEMORY: 99 Programs INSTALLATION TYPE: Floor Mounted BODY TYPE: Monoblock MOTOR POWER: 37 kW MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x D): 5000 x 3600 x 2000 mm APPROXIMATE WEIGHT: 55,000 kg As a manufacturer, technical specifications can be customized according to your requirements.

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 590 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 60 t, ram bore: 40 mm, power: 5.5 kW (7.48 HP), punching force: 60 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION Tedpfx Afovtx D Nj Tjf • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 60 STROKE ADJUSTMENT RANGE (MM) 10-100 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 55 RAM - REGULATION RANGE (MM) 60 RAM - TABLE DISTANCE (MM) 400 LOWER TABLE DIMENSIONS (MM) 590X800 LOWER TABLE HOLE DIAMETER (MM) 140 RAM TABLE DIMENSIONS (MM) 275X450 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 5.5 WEIGHT (KG) 3200 MACHINE DIMENSIONS (MM) (H - W - L ) 2300X1550X1300 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 660 mm, table length: 860 mm, stroke adjustment: 110 mm, pressing force: 80 t, power: 5.5 kW (7.48 HP), punching force: 80 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Four-sided bearing guides • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Double coil safety valve • Manually adjustable stroke • Automatic adjustable stroke (for 150-300 tons) • Photoelectric safety curtain • PLC control system • Touchscreen LCD display (for 150-300 tons) • Two-hand pedal control system • Mechanical safety system • Hydraulic safety system (for 200-300 tons) • Emergency reverse motor motion • Complies with occupational safety regulations • Vibration dampening pads • Country of origin: Turkey • Warranty period: 24 months • We offer production of C-type eccentric presses from 5 up to 250 tons. TYPE: C-Type Monoblock Body Capacity: 80 Tons Throat Depth: 330 mm Distance Table to Slide: 425 mm Slide Adjustment: 70 mm Approx. Press Width: 1,400 mm Approx. Press Depth: 1,650 mm Approx. Press Height: 2,400 mm Table Hole Diameter: 180 mm Tjdpfevtx H Rjx Af Tef Table Size: 860 x 660 mm Die Fastening Slot Diameter: 40 mm Slide (Ram) Size: 480 x 300 mm Table Height From Floor: 800 mm Stroke Adjustment: 10-110 mm Strokes per Minute: 50 spm Motor Power: 7.5 kW Motor Speed: 1,500 rpm Approx. Weight: 3,700 kg • As the manufacturer, we can modify the technical specifications upon request.

Condition: new, Year of construction: 2025, table height: 850 mm, pressing force: 80 t, table width: 600 mm, table length: 800 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, Todpfxovxhb Uj Af Tsf o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 180 mm, pressing force: 200 t, ram bore: 60 mm, power: 15 kW (20.39 HP), punching force: 200 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. Tedpfx Asvtyx Ief Tjf TECHNICAL SPECIFICATIONS: PRESSURE (TON) 200 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-180 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 90 RAM - TABLE DISTANCE (MM) 600 LOWER TABLE DIMENSIONS (MM) 800X1100 LOWER TABLE HOLE DIAMETER (MM) 220 RAM TABLE DIMENSIONS (MM) 425X650 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 15 WEIGHT (KG) 9100 MACHINE DIMENSIONS (MM) (H - W - L ) • MANUFACTURER TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 440 mm, table length: 700 mm, stroke adjustment: 80 mm, pressing force: 40 t, ram bore: 35 mm, power: 4 kW (5.44 HP), punching force: 40 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 40 STROKE ADJUSTMENT RANGE (MM) 10-80 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 110 RAM - REGULATION RANGE (MM) 50 RAM - TABLE DISTANCE (MM) 325 LOWER TABLE DIMENSIONS (MM) 440X700 Tedovtx Axopfx Af Tof LOWER TABLE HOLE DIAMETER (MM) 140 RAM TABLE DIMENSIONS (MM) 260X400 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 4 WEIGHT (KG) 2500 MACHINE DIMENSIONS (MM) (H - W - L ) 2260X1130X1020 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: new, Year of construction: 2025, drop-through hole in table: 130 mm, table width: 400 mm, table length: 600 mm, stroke adjustment: 70 mm, pressing force: 35 t, ram bore: 35 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. Tedpfx Aovtxzzjf Tjf TECHNICAL SPECIFICATIONS: PRESSURE (TON) 35 STROKE ADJUSTMENT RANGE (MM) 0-70 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 115 RAM - REGULATION RANGE (MM) 45 RAM - TABLE DISTANCE (MM) 330 LOWER TABLE DIMENSIONS (MM) 400X600 LOWER TABLE HOLE DIAMETER (MM) 130 RAM TABLE DIMENSIONS (MM) 120X140 RAM MOLD EYEBALL DIMENSIONS (MM) 35 MOTOR POWER (KW) 3 WEIGHT (KG) 1500 MACHINE DIMENSIONS (MM) (H - W - L) 1100X1400X1800 SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: new, Year of construction: 2025, throat depth: 175 mm, table width: 375 mm, table length: 570 mm, stroke adjustment: 60 mm, pressing force: 25 t, STANDARD FEATURES • Steel construction frame • Stress relieving of the frame and welded parts by vibration • Parallelism and squareness tolerance between tables in accordance with ISO and DIN standards Todpfx Asxg R Ucof Tof • Pneumatic clutch and brake combination • Slide block guided by 4 rails • Slide, connecting rod, ram, and similar parts made of cast steel • High-strength, monobloc crankshaft • Bronze bushings in connecting rod • Equipped with a spare table • Ratchet device table-to-ram adjustment (motorized for 150 ton and above) • Manual centralized lubrication system • Pneumatic pedal with latching mechanism and dual-hand control with timer • Electric counter • PLC integration • CE compliance • Finger protection with light barriers • Safety PLC (controls all electrical systems, valves, double solenoids, and pedal) • Dual-coil safety valve • Panel with position lock switch • Safety block • Made in Türkiye TECHNICAL SPECIFICATIONS Capacity: 25 Tons Distance Between Table and Ram: 300 mm Ram Adjustment: 50 mm Approximate Press Width: 870 mm Approximate Press Depth: 1380 mm Approximate Press Height: 1870 mm Table Hole Diameter: 145 mm Table Size: 375 / 570 mm Die Clamping Slot Diameter: 35 mm Ram Size: 260 / 170 mm Table Height from Floor: 710 mm Stroke Adjustment: 10 / 60 mm Strokes per Minute: 120 spm Motor Power: 3 kW Motor Speed: 1000 RPM Approximate Weight: 1300 kg

Condition: new, Year of construction: 2025, throat depth: 270 mm, table width: 500 mm, table length: 350 mm, stroke adjustment: 60 mm, pressing force: 25 t, STANDARD FEATURES: • Steel construction body • Four-sided guideways • Spheroidal cast iron connecting rod and gear housing • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • In compliance with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Automatic adjustable stroke (for 150–300 ton models) • Photoelectric safety guard Todpfx Afexg Rwqo Tsf • PLC control system • Touchscreen LCD display (for 150–300 ton models) • Dual hand pedal control system • Mechanical safety lock system • Hydraulic safety system (for 200–300 ton models) • Emergency reverse motor function • In compliance with occupational safety regulations • Anti-vibration pad • Country of origin: Turkey • Warranty period: 24 months TECHNICAL SPECIFICATIONS: PRESSURE (TON): 20 STROKE ADJUSTMENT RANGE (MM): 0–60 STROKES PER MINUTE (SPM): 150 SLIDE – ADJUSTMENT RANGE (MM): 40 SLIDE – TABLE DISTANCE (MM): 270 LOWER TABLE DIMENSIONS (MM): 350 x 500 LOWER TABLE HOLE DIAMETER (MM): 120 SLIDE TABLE DIMENSIONS (MM): SLIDE DIE SHANK DIMENSION (MM): 35 MOTOR POWER (KW): 2.2 WEIGHT (KG): 1000 MACHINE DIMENSIONS (MM) (H x W x D): 1500 x 1100 x 1100