Used Corn Oil Press Machine for sale (70,291)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Ncedpfx Aloyangkenou Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Ncedpsw Rcgtsfx Alneu Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Ncjdpfsw Nzrfex Alnju Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Ncedpfswrm T Ijx Alnsu

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Ncsdpfx Astxc Itolnou

Year of construction: 2006, condition: good (used), Oilseed screw press Farmet FS1000, 55kw long. In a good condition, complete, ready for loading. Capacity up to 1.400kg/h. Nodpfoxrc Ixjx Alnjcu

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Ncsdpfx Aloxa Hy Uenou Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Ncsdpfx Aotxinaelnju

Year of construction: 2007, condition: used, REINARTZ AP15 rapeseed press, 45kW engine, manufactured in 2007. Capacity: 1 ton/hour (8,000 tons per year). Nsdpfx Alezbyqwenecu We also have other related equipment for oil production.

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Ncsdpfsu Nu Hijx Alnju Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Ncodpfsu Ic Avox Alnsu Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: No.0401057, total width: 700 mm, total length: 2,120 mm, total height: 1,200 mm, overall weight: 500 kg, mold height (min.): 2,356 mm, FAG – Offset Printing Press / Deluxe Model Manufactured in Switzerland in the 1960s, printing format 40x58 cm A beautiful, compact, and robust unit. Technically flawless and fully operational – the ideal printing press for museums, schools, workshops, and dedicated hobby artists who are looking for an authentic and durable piece of equipment. Nedsx A Eaxopfx Alnocu Until recently, it was located in the workshop of the Gutenberg Museum in Freiburg, Switzerland. The machine can be used for a variety of applications, including letterpress printing with lead or wood type, woodcuts, linocuts, embossing, die-cutting, and much more. L = 160 cm without table / with table 212 cm / W = 100 cm with crank / without crank 70 cm / H = 120 cm / Weight approx. 500 kg.

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg Ncedpfx Aloy Ty Sajneu In good condition.

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, One color flexo printer for tissue Year: 1991 Type: Fabio Perini 8930 Nedpfxey Iddvs Alnecu Printing width: 2800 mm

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Nodeq Awg Eepfx Alnjcu

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Nedpfxjrv A Hmj Alnscu Manual feed Weight: approx. 280 kg

Condition: good (used), Banding machine Willy Heckmann WHU 200E The machine is like new, ready to work. Manufacturer: Willy Heckmann GmbH & Co. Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Nedpfx Alsy S Edlenscu Strap width 12mm Power supply 230V Weight 200 kg Ask About The P

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels Ncodpoxw Rcuefx Alnou - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Ncedpfx Asif Sg Sjlnsu Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Complete external and internal corner machining. Nsdpfx Alsy U Rbnenocu Support table.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, feed rate Y-axis: 15 m/min, workpiece weight (max.): 15,000 kg, power: 3 kW (4.08 HP), type of cooling: water, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1503CH Laser Blanking Line | Coil Laser Cutting System 3–6 kW For sale is a SENFENG SF1503CH Laser Blanking Line, a fully automatic coil laser cutting system for processing thin sheet metal directly from the coil. The system combines unwinding, leveling, feeding, laser cutting, and unloading in a continuous production line. It is particularly suitable for manufacturers who want to automate their series production, reduce material handling, and improve material utilization. Ncjdjt Huugepfx Alnju Application areas: Suitable for automotive suppliers, switchgear and housing construction, mechanical engineering, construction and agricultural machinery, kitchen and sanitary industries, metal furniture, medical technology, facade and decorative elements, and general sheet metal processing. Processable materials: Carbon steel, stainless steel, galvanized sheet metal, and other suitable coil materials after technical evaluation. Technical data: Model: SENFENG SF1503CH System type: Coil laser cutting system / Laser blanking line Laser power: 3–6 kW Working area: 3000 × 1500 mm Coil thickness: 0.8–3.0 mm Coil width: 600–1500 mm Max. coil outer diameter: Ø 1400 mm Standard coil inner diameter: Ø 508 mm Max. coil weight: 10,000 kg Feeding speed: 0–15 m/min Feeding length: 0–3000 mm Positioning accuracy X/Y: ±0.05 mm Repeatability X/Y: ±0.02 mm Power supply: 380 V, 50 Hz, three-phase Protection class: IP54 Possible equipment / configuration depending on the offer: Depending on the configuration, the system can be equipped with a loading cart, unwinding unit, feed and leveling unit, sheet metal positioning and alignment system, laser cutting unit, CNC cutting system, operator interface, cooling system, safety monitoring, and unloading or material take-up unit, among other features. Optionally, depending on the project requirements, protective film lamination, marking system, safety fence/light curtain, nesting software, and dust and fume extraction can be included. The exact equipment, brands of key components, and optional extensions are determined in the individual offer. Advantages: Fully automatic process from coil to finished cut part Reduced manual material handling High material utilization through coil processing and nesting Precise sheet metal guidance through correction and alignment system Leveling technology for stress reduction and improved flatness Suitable for continuous series production Intelligent CNC control with process database Automatic selection and control of auxiliary gases possible Description: The SENFENG SF1503CH was developed for processing thin coil material. Compared to conventional sheet metal cutting, the system reduces several intermediate steps such as separate unwinding, external leveling, manual loading, and individual handling of sheet metal. The coil material is picked up, unwound, leveled, and then precisely fed to the laser cutting unit. The integrated leveling technology improves the flatness of the material and reduces internal stresses before the cutting process. The system is particularly suitable for companies with a regular need for flat sheet metal parts, recurring contours, and series production. Inspection, technical consultation, and quotation upon request.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying Njdpfx Ajy Ul I Aelnocu PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Nodpfx Alsy Ulitjnjcu Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: good (used), Year of construction: 2021, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, operating pressure: 8 bar, input frequency: 50 Hz, Automatic linear electro-pneumatic counter-pressure filling and capping machine GAI MLE 661-BIER, including rinser, feed conveyor, and automatic labelling machine ENOS, for approximately 1,350 bottles per hour. The machine is configured for Longneck 33cl bottles and is fully functional. The machine is currently powered, well-maintained, and in productive use (availability by arrangement, decommissioning scheduled no later than the end of 2025). An on-site inspection can be arranged by appointment. Ncsdpfx Ajwx Hzxslnsu

Condition: good (used), Year of construction: 2016, Vortex Robopop Mark IV popcorn machine 2016, stainless, hot air popper for making popcorn, up to 28Kgs per hour, 3Ph Nodjy R Elaepfx Alnjcu