Used Cooling Tower for sale (8,078)

Condition: reconditioned (used), modernized machine with a new StoreControl L control system Control system expansion optionally available currently 5 (of the original 6) identical machines available External dimensions: Overall height 5,900 mm Overall width 1,580 mm Overall depth 2,680 mm 30 supports, each with a load capacity of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total load capacity up to 20,000 kg Start of opening at 860 mm above floor level, then 1000 mm high Color: gray / dark gray, supports hot-dip galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x x.0 kW / 400 Volt Horizontal drive 1 x 0.xx kW / 400 Volt additional extras: Lift door can be operated manually Isdpfx Ajg Dckuopcjig Subject to errors, technical changes, and minor deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Ijdpfx Ajg D H Rujpcoig Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: good (used), Year of construction: 2016, Year of production: 2016 Voltage: 400 V / 50 Hz Iiedpfjixtlrox Apcog Motor power: 2 x 3 kW Air volume: 10.000 m3/h Filter area: 76 m2 Number of filters: 4 pieces Max. pressure: 2800 Pa Size: 2050 x 1515 x 2910 mm Weight: ca. 980 kg

Condition: excellent (used), Year of construction: 2006, Thermotec PX06 Chiller Manufacturer: Thermotec NV Model: PX06 Version: H35CX Series: 06C---B01 Year of manufacture: 2006 Refrigerant: R407C Number of identical circuits: 2 Maximum permissible pressure HP: 2800 kPa Iedpfjrgn Rlex Apcsig LP: 2000 kPa Water Permissible temperature: 3 to 30 °C Tank volume: 950 liters Permissible tank pressure: -20 to 600 kPa Nominal pump flow rate: 45 m³/h Nominal head: 30 m Maximum suction side pressure: 16 bar Maximum discharge side pressure: 28 bar Electrical data Voltage: 3x380/415V 50 Hz Rated power: 64.5 kW Max. electrical current: 118 amps Protection class: IP54 LCD control panel: Carel PGD0000f00 Controller: Carel PC02000AM0 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used refrigeration systems in our shop! International shipping costs upon request!

Condition: reconditioned (used), modernized machine with new StoreControl L control system Control system expansion optionally available 5 of the originally 6 identical machines still available External dimensions: Overall height 6,900 mm Overall width 1,580 mm Overall depth 2,680 mm 80 carriers, each with a payload of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the opening at 860 mm above floor level, then 1000 mm high Color: Gray / Dark Gray, carriers hot-dip galvanized Iijdpfsrvkq Eex Apcog Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.25 kW / 400 Volt Additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Photos of identical machines Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Iedpfevcqzrex Apcjig

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Iijdpjhwt H Aefx Apcog Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: used, Collecting pan, floor pan, collecting container, floor element, steel flat pan, coolant liquid collecting pan, collecting pan grinding machine milling machine Iodeh Ic Nzopfx Apceig -Collection pan: for chips with coolant liquid, 1045 x 745 mm -Bath height: 150 mm -Cut-out: 240 x 175 mm -Total dimensions: 1045/745/H150 mm -Weight: 12.1 kg

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -Number: 2x fans -Fan diameter: 400 mm -No further technical data available -Number: 2x coolers available - Price: per piece Iisdpjb Nx Hiofx Apceg -Dimensions: 1000/1700/H320 mm -Weight: 94 kg/piece

Condition: reconditioned (used), modernized machine with new LTG StoreControl L control system currently 6 identical machines available External dimensions: Overall height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total load capacity of the machine up to 2 x 15,000 kg Ijdpfxjd Sphij Apceig 63 supports with a central web for up to 400 kg load each in the clear internal dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the opening at 875 mm above floor level, then 875 mm high Motor power: Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Color: gray/blue Surface cleaned, signs of use possible Subject to errors and technical changes, as well as minor deviations in photos. Delivery and installation are currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 2007, cool machine GWK Weco 48 AZX 48 KW, Cooling capacity pump and tank, year: 2007, price: 8.500 €, contact: Mr. Rainer Eckerle Iiodpfx Aod H Rd Iopcsg

Condition: used, Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger Iedpfx Apsqva Nyeceig -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Condition: reconditioned (used), Currently, 13 (formerly 17) identical machines are still available. Mechanically refurbished machine with new LTG control system StoreControl L. External dimensions: - Height: 8,450 mm (modification possible at extra cost) - Width: 2,805 mm - Depth: 2,810 mm 50 carriers, each with a load capacity of 250 kg Clear usable dimensions: - Width: 2,450 mm Iisdpjn D A I Tofx Apceg - Depth: 825 mm - Height: from 55 to 750 mm Total load capacity per machine up to 2 x 15,000 kg Operation opening begins at 890 mm above FFL (finished floor level), with a height of 875 mm Colour: cream white / blue, carriers sendzimir galvanized, surfaces cleaned, traces of use possible Performance data: - Vertical drive: 1 x 5 kW / 400 Volt - Horizontal drive: 1 x 0.55 kW / 400 Volt Optional transport trolleys available Subject to errors, technical modifications, and variations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Iedpfx Aoqqhrhopcsig Refrigerant R401A

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 5860 mm Iiedpodnzg Nofx Apcsg Overall width 2940 mm Overall depth 1180 mm 25 trays, each with a load capacity of 165 kg in the clear internal dimensions: H = 380 mm W = 2500 mm D = 410 mm Chain pitch 412 mm Total load capacity up to 4110 kg Deposit table at 1000 mm above floor level, with rubberized work surface Color scheme: GRAY / BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 Volt Base machine for this modernization: SYS 180 by Kardex Subject to errors, technical changes, and minor deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: like new (used), functionality: fully functional, cooling capacity: 895 kW (1,216.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,525 kg, input voltage: 400 V, total width: 2,400 mm, total length: 12,960 mm, total height: 2,850 mm, warranty duration: 6 months, Gas cooler & Evap CX heat pump Güntner S-GGDV CD 090.1 DE/2C-E-44 Iiodpfxszqui Ej Apceg Gas cooler capacity: 895.0 kW Evaporator capacity: 465.0 kW Refrigerant temperature: inlet 120.0°C — outlet 37.0°C (gas cooler) Evaporation temperature: -2.0°C (evaporator) Air flow: 216092 m³/h Fans: 24 pcs. EC, 3~400V 50-60Hz Tubes: copper / Fins: epoxy coated Heat exchange surface: 4839.5 m² Max operating pressure: 130.0 bar Dimensions: 12.96 x 2.4 x 2.85 m Weight: approx. 6525 kg Condition: used for testing

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Isdpezpfhcofx Apceig

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Iijdpfx Aoy Dipcepcog

Condition: used, Year of construction: 2011, 2011 | Power Towers Nano Sp | Used Vertical Mast Lift 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 39 inspection points 39 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: well working unit 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41234 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Iijdpfx Aszw Nrhspceg ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Ijdpfjmmdq Tsx Apcoig Width: 130 cm Depth: 65 cm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Iijdpfx Aszx N Thopcsg Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Iedpoy Eydysfx Apcjig Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process Iodpfx Apozxcb Eocsig -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 553 kW (751.87 HP), type of cooling: air, aircooled Chiller Carrier 30RBP 550R Cooling cap.553 KW (162 refr.tons) 2 circuits with each 4 scroll compressors Ijdsznb Rkepfx Apcoig Plate evaporator, with integrated pump R 32 tested,ready for operation

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Technical data: Iedjzrx Ihjpfx Apcoig - Tool shank: 35 mm - Clamping length: 65 mm