Air cooler, evaporator, cold store, refrigerated container, cold room
O8x8eszn
-Number: 2x fans 520 watts 1350 rpm
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Dimensions: 1200/2300/H720 mm
-Weight: 254 kg
We sell 2 pieces of Güntner recirculating chillers as shown in the pictures below. The condition of both coolers is very good. Both recoolers have few operating hours.
The problem is that the system has not been emptied properly during the winter and no antifreeze has been added. Therefore, some of the copper pipes on one side are cracked or cracked. Since we are not able to solder ourselves and the recirculating chillers are too small from the performance data at our new location, both are for ...
The air cooler was used to cool a CNC machine. In another advertisement there is a suitable air conditioner from Rittal.
Gvyaac
The cooler is made of aluminum, attachments made of steel. The cooler can be placed inside and outside. The medium to be cooled is pumped through the cooler, with the ambient air taking care of the heat exchange by means of a fan. Size of the cooling surface 98 x 108 x 9 cm.
Gwbobw
Media are a mixture of water and glycol, or oil, or gases, or air. Max pressure 16 bar. Fan must be ordered separately is not included.
There are 4 pieces available.With or without a fan on request. The three-phase fa...
Euroclima air cooler / air heater
ZHK 2000S
Year of manufacture 2008
6130 m³/h
unused / unused
B73gv88u
Please note the photos
Please look at the pictures. Important!!!
Gross weight / Gross weight: 500 kg
X230
Manufacturer: Güntner
9lj2po8bm
Dimensions: 1500 x 4900
Fan diameter: 1000mm 2 piece
Air cooler, evaporator, cold store, refrigerated container, cold room
-2x fans: 520 watts 1350 rpm
-Fan diameter: 500 mm
Rx70i77bh
-Lamella spacing: 10 mm
-Electric defrosting
-Housing: made of stainless steel
-Drip tray
-Number: 2x cooler available
-Price: per piece
-Dimensions: 1100/2340/H700 mm
-Weight: 318 kg
Machine type: Dry-air-dryer for granulate plastic
Brand, type, colour: Somos R40 yellow
Type of control: 230V, 50 Hz
L2ubr
Dry air flow rate: 40m³/h
Heating capacity dry air: 4.5kW
Heating capacity regeneration: 4.5 kW
Drive capacity: 0.4 kW
Connected wattage: 4.9 kW
width: 210 cm depth: 90 cm height: 220 cm weight: 190kg
Additional information: 3 x 25l hoppers, 3 x additional heating 1,1kW, return air cooler 1,8m³ - max. Temp: 130°C, 3x manual gate valve to regulate airflow, on mobile frame
C...
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 1x fan
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Drip tray
-Number: 2x cooler available
Iu3veq3no
-Price: per piece
-Dimensions: 1100/1450/H720 mm
-Weight: 184 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
Rysdvqabk
-Number: 4x fans
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Drip tray
-Number: 2x cooler available
-Price: per piece
-Dimensions: 4550/1100/H940 mm
-Weight: 600 kg/piece
Air cooler, evaporator, cold store, refrigerated container, cold room
-Fan diameter: 450 mm
Rysglksvt
-Dimensions: 1060/800/H550 mm
-Weight: 66 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
U737k
-Number: 1x fan
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing off
-Drip tray
-Number: 2x cooler available
-Price: per piece
-Dimensions: 1700/1200/H970 mm
-Weight: 232 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 2x fans: 470 watts 1350 rpm
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Number: 3x cooler available
-Price: per piece
-Dimensions: 1100/2300/H720 mm
Rx73vhkbp
-Weight: 320 kg/piece
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 1x fan
-Fan diameter: 500 mm
-Number: 3x cooler available
Rysdl80nj
-Price: per piece
-Dimensions: 1350/740/H700 mm
-Weight: 174 kg/piece
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 1x fan
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
Dyffmrl
-Drip tray
-Dimensions: 1700/1200/H970 mm
-Weight: 232 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
-Fans: 3
-Fan diameter: 500 mm
-Blade spacing: 10 mm
-Housing: made of stainless steel
-Drip tray
-Number: 4x air coolers available
-Price: per piece
-Dimensions: 3570/1100/H940 mm
Rx738ypvq
-Weight: 534 kg/piece
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 1x fan
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Drip tray
Lmxjj
-Dimensions: 1200/1450/H720 mm
-Weight: 186 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
Rx77ijvjr
-Number: 3x fans
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
-Drip tray
-Dimensions: 3320/1100/H720 mm
-Weight: 500 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 2x fans
-Fan diameter: 400 mm
Ps8u3dfh
-no further technical data available
-Number: 2x cooler available
-Price: per piece
-Dimensions: 1000/1700/H320 mm
-Weight: 94 kg/piece
Air cooler, evaporator, cold store, refrigerated container, cold room, ceiling air cooler
-Number: 1x fan
-Fan diameter: 400 mm
-Lamella spacing: mm
-Dimensions: 1030/1770/H400 mm
Lne7h
-Weight: 82 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 2x fans 0.58 kW 1200 watt
Gfusl7x
-Weight: 16 kg
Air cooler, evaporator, cold store, refrigerated container, cold room
-Number: 3x fan motors
-Fan diameter: 500 mm
-Lamella spacing: 10 mm
-Housing: made of stainless steel
Fnzzdfp
-Drip tray
-Number: 1x cooler available
-Price: per piece
-Dimensions: 3320/1100/H720 mm
-Weight: 500 kg/piece
Extraction, oil mist separator AFS (Air Filter Systems) Type AFS 1100
Fog and smoke separator, filter system, oil mist extraction
Serial No: 3341 Year of construction 2001
Air flow rate - volume flow approx. 1100 m3/h
Suction connection Ø 200 mm
Exhaust air grille 440 x 140 mm
Engine power 0,5 kW
Mains connection 380 Volt, 50 Hz.
- 2 pcs. pre-filters made of wire mesh for cleaning
St90gs
- 2 pcs. prefilter with exchangeable fleece
- 1 piece perforated plastic prefilter
- Main filter of wire mesh...
Designed for welding with 15 PAW (Plasma) method without additional material
Used to weld individual sheet metal sheets together (to the strip) and to weld the seal welds of the tanks (to the twisted sheet)
Thickness of welded material 1-10 mm single-layer or multi-layer weld
Maximum weld length 3250 mm
Can be used for diameters from 380 to 1450 mm Plasma / TIG seamer benche
Cc7d0kkq
Hot Foil Stamping machine AIR HYDRAULICS AH
Year 2006 - Serial-No. AH 930002
Str2nw
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can b
AIR LIQUIDE PLASMA - ALPHATOME 30 - 2005- system HP digital process- plasma Nertajet HP 125- cutting width 3000 mm (for one cut piece)- cutting thickness max 50 mm- table length 12000 mm- under power- including exhaust
Bi7bg8nv33
Pressure reducers, pressure regulators, manometers
S0yhevger
-for oxygen
-Inlet pressure: max. 200 bar
-Outlet pressure: 0 - 12 bar adjustable
-Number: 1x piece available
-Price: per piece
-Weight: 1.4 kg
Max. Operating pressure: 10 bar
effective delivery rate at approx. 7.5 bar: 450 l / min
Required drive: 1450 rpm, 4 kW
Ppwmuohj
Drive motor: 380/660 V, 1440 rpm, 5.5
Air chamber volume: 250 l
Required space: 1500 x 600 x 1320 mm
Weight approx .: 250 kg
AMS LED-UV curing system, consisting of 2 lams, 2 controllers, 4 fitting places, chiller, installed on Roland 500, can be used in other B2 size machines. Very little used, about 100h of work. One lamp can be sold separately.
Bn3bvkhto3
Jogger Schuster RW
Bi0gy2dmbn
Year ca. 1992 - Serial-No. -
Size 900 x 1150mm
mobile, tiltable
height adjustable
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Condition Used
Listing name AIR LIQUIDE Arpege 40 Liquid Nitrogen Storage Vessel
Bnvu8o0y
2008 40L liquid nitrogen storage vesselSELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFTF077
Digestorium exhaust system for pharmacies, chemistry and medicine
-Interior dimensions: 540/850 / H900 mm
-Stainless steel version
-Glass door front
-With Camfit filter cartridge
-Connection: 0.085 kW
Ikgjfpn
-Type suction: EB 225
-with extractor hood
-Dimensions: 675/900/H1200 mm
-Weight: 100 kg
Technical characteristics
Hxbp87f8o
Integrated dryerSound proofTank / Vat
NEW state
1.84 hours of functionning
300 L air tank
PF6 filter and automatic purging Debit / Rate of air flow: 33 m3/h Power and Motors
Motor: 4 CV Overall dimensions
- no description available -
Fw0ts87
More pcs in stock!
Print resolution
8 dots/mm (203 dpi)
12 dots/mm (300 dpi)
24 dots/mm (600 dpi)
Print speed
Up to 400 mm per second
Tamp sizes (mm)
Tamp-Blow standard of
12.5 x 7 to 160 x 300 mm,
label lengths must be limited in accordance
with label quality, longer or smaller labels are
possible using special tamps
Label gap
Minimum 3 mm
Label roll
300 mm diameter, up to 450 running meters,
core 76 mm (3"), outside winding
(optional inside winding)
Data interfaces
RS232, RS422, RS485, Eth...
Only 20 hour of runtime
Power 15 kW
Capacity (m3/min) 8 bar 2.25
10 bar 1.82
Noise level dB(A) 60 +/- 2
Connection G3/4"
Irs2v9hao
Size WxLxH 91x70x112 cm
Weight 225 kg
Please check out our other listings as well.
Condition Used
Listing name AIR LIQUIDE Arpege 70 Liquid Nitrogen Storage Vessel
Iqhz7pb
70L Liquid Nitrogen Storage Vessel with temperature recorder.SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFTF074
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs.
-Weight: 42 kg
Qk8ux2w3f
CNC plasma and flame cutting machine
Air Liquide Welding (Lincoln Electric)
Oerlikon
Oxytome B40 E RS
Year of construction: 2008
Oxyfuel: 2x MACH-HP propane machine torches (15-150mm)
Plasma: 2x Hypertherm HPR260 with THC
Length complete: 32.000mm
width : 5.895mm
height: 2.400mm
cutting length: 28.000mm
cutting width: 2.500mm
CNC: Burny / AMC 10
Dwsvzq
Filter system: Kemper
Ink Jet Printer: Hitachi IJ Printer / Model PXR-D
Commissioning on request
Air Liquide gas semi-trailer for liquid natural gas, LNG, methan,
Ogeg9
Gas tank volume: 45 m3,
Stainless steel
Tara 12600 kg
Test pressure 9,5 bar
Cryogenic isolation for LIN, LOX, LAR, LNG
We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. We speak German, English and Russian.
RIWO AIR compressor SKL 700 Standard Extra
Engine No: 388391
Bjobjpatoq
Riwo DS 32 - M
Riwo DS 80 - M
year of construction: 2008
weight: 297,5kg
Capacity 1.0 mm
Bkqnceqwex
Dimensions: 610-610-292
Air Flow: 3400 m3/h
Pressure Drop: 250 Pa
Baxmo8z0
Efficiency:99.95 %
