Used Coating Machine for sale (66,588)

Condition: used, BROACHING MACHINE Hfjdpfx Aot Hr Dfsgtel

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION Hfedpfx Aoyynlzogtol WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES STILL IN PRODUCTION TILL MAY 15TH

Condition: used, Year of construction: 2018, - Length: 220 cm - Width: 150 cm - Height: 35 cm Shrink film packaging system Manufacturer: Erregi Type: 300 LP Year of manufacture: 2018 This film packaging system with a shrink tunnel from the manufacturer Erregi is used for the automated packaging of products in shrink film. It offers precise control of temperature and air circulation, ensuring uniform shrinking at high efficiency. Two conveyor tables are located before and after the machine, enabling smooth material flow and ergonomic handling during the packaging process. Technical data: - Voltage: 400 V, 50 Hz - Feed rate: 15 m/min - Weight: 1300 kg (without conveyor tables) External dimensions - Length: 12 m - Width: 4 m - Height: 2.5 m Workpiece dimensions Hfodpfozuz Shox Agtsl - Length: 220 cm - Width: 150 cm - Height: 35 cm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Hodpfx Aoz Aplxsgtefl Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Hodpfx Agozkkc Uetofl Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Equipment: crane, Complete aluminium foundry for sale – machines, equipment, and supplies Due to the cessation of our business operations, we are offering our complete aluminium foundry for sale, including machines, equipment, and various supplies. Hjdpfx Agsz A Agtetsfl This is an interesting opportunity for an existing foundry that wishes to expand its capacity, but also for an entrepreneur who wants to acquire a complete setup for aluminium casting in one go. The foundry is equipped for the production of aluminium castings and has the machines, equipment, and tools required for the complete casting process. The complete setup includes, among other things: Melting and casting equipment Equipment and supplies for sand casting Mould boxes and various casting tools Equipment for preparing and processing moulding sand Workbenches and other production equipment Various hand tools and supplies Stock of casting and consumable materials Various accessories specifically for aluminium casting Other machines and supplies from the foundry The foundry has been used professionally within our own production for many years. Due to the cessation of our business operations, the complete setup is now available. We prefer to sell the foundry as a complete unit. This makes it possible to take over an existing production facility with all its associated supplies in one go. The equipment and inventory can be viewed by appointment. If you are seriously interested, we can, of course, provide a complete overview of the machines, equipment, tools, and other supplies available. Price: upon request Are you interested in the complete foundry or would you like more information about the equipment available? Please feel free to contact us. Viewing is possible by appointment.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm Hfsdpfx Agszuzbcstol - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: excellent (used), Industrial Flourer / Breadcrumb Coating Machine – Stainless Steel Automatic industrial flourer / breadcrumb coating machine, designed for the continuous and uniform application of flour, breadcrumbs, or other dry coatings onto food products before subsequent frying, baking, or freezing operations. The equipment incorporates a continuous conveying system that guides the product through the coating area, where the dry ingredient is distributed over its surface. This type of machine allows coating both the top and bottom of the product, depending on the configuration and the material used. MAIN FEATURES - Type: Industrial flourer / breadcrumb coating machine - Automatic application of dry coatings - Continuous operation - Product conveying system - Hopper / tank for flour or breadcrumb material - Controlled coating distribution - Coating of the product surface - Recovery and recirculation system for excess material, depending on configuration - Adjustment of product flow and coverage - Construction primarily in stainless steel - Open design for easy cleaning and inspection - Mobile structure on wheels - Electrical control panel - Guards on moving parts - Designed for integration into industrial food preparation lines PROCESS The product enters continuously via the conveyor belt and passes through the dry coating application area. The flour, breadcrumbs, or breading mix is distributed around the product to achieve the most uniform coverage possible. Excess material can be separated from the product and returned to the coating circuit, depending on the installed configuration. Once floured or breadcrumb coated, the product automatically continues to the next operation. It can be integrated with: Formers Pre-dusters / pre-flouring machines Batter applicators Coating machines Systems for removing excess coating Continuous fryers Ovens IQF freezing tunnels Coolers Packaging lines APPLICATIONS Especially suitable for meat industries, fish processors, manufacturers of breaded products, pre-cooked foods, and ready-made dishes. Depending on its configuration, it can be used for: Nuggets Hamburgers and formed products Chicken fillets Meat products Fish and seafood Croquettes Vegetable products Other breaded or floured foods The machine allows for the automation of the dry coating application, improves its uniformity, and maintains a continuous flow of product to the subsequent processing stages. Hfjdpfx Aszxwycegtjl Machine available for inspection. Additional technical information, working width, production capacity, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. Hsdpezycnnsfx Agtofl - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Hfsdpfoy Sbzmsx Agtel Machine No.: E022110205415 Year of manufacture: 01/2021 Machine weight: 1200 kg Power supply: 380–415 V, 3-phase, 50 Hz Power (kW): 8 kW Current consumption: 15.4 A Belt: Stainless steel mesh belt, width 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional equipment included: Forming plates: 2 pallets with a set of plates for various product shapes. Service stand: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Tool trolley: Original GEA trolley for easy storage and changeover of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. This 2021 unit features a modern design “Made in the Netherlands” that ensures maximum hygiene and production precision. The system allows for quick product changeover – from classic burgers and nuggets to custom 2D and 3D shapes. Thanks to its stainless steel mesh belt and the included discharge belt system, the machine is ready for direct integration with coating, frying, or freezing lines. The included tool trolley and complete set of forming plates make this package an extremely flexible solution for meat, poultry, and plant-based food processing plants.

Condition: used, Year of construction: 1995, Used Machine Year of Manufacture: 1995 Features and Technical Specifications: Cost-Effective: - Turbo System: 25% higher system performance thanks to state-of-the-art application technology—while requiring the same amount of floor space! - Shorter cycle times thanks to optimized automatic programming for fast UV systems - Up to 70% cost savings compared to casting and injection molding through the use of solvent-free systems and one-person operation Flexible: - Cost-effective one-person operation with a return cycle function, or optionally in a continuous-flow process for two-person operation - The system is expandable; additional rolling, smoothing, or sanding units can be added Ergonomic: - Easy operation thanks to ergonomic controls Service-friendly: - Thanks to a cleaning circuit and quick-change system Hodpfjzlbq Ejx Agtefl Reliable process: - Top-quality surfaces, precisely reproducible Includes: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying channel with 1 lamp (60/80/120 W) - Working height: 850–950 mm - Rubber-coated application roller: D=238 mm - Chrome-plated metering roller: D=174 mm - Clearance height: 3–120 mm - UV lamp module: 80/120-watt mercury - Power consumption: approx. 21 kW Dimensions: 1300 x 3080 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Hfjdpfx Aszzbbcogtel Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours. Hedpfx Aszti Tkjgtjfl

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Hfodpfx Ajxg Tfqsgtjl

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Hfodezvaz Dopfx Agtel Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs Hfjdps Ebqnefx Agtjl * 5 litres METCOOL coolant Option: Machine base cabinet

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth Hfedpfxebhh Aws Agtel - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, Q-Fin F200 deburring and grinding machine with conveyor belt For sale: Q-Fin F200 deburring and grinding machine for professional surface treatment, equipped with a conveyor belt. Hodpjz A A E Ajfx Agtjfl This compact industrial machine is suitable for the efficient post-processing of metal parts. Ideal for deburring, grinding, and improving the surface of workpieces after, for example, sawing, milling, laser cutting, or other machining operations. The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine details: Brand: Q-Fin Type: F200 Deburring and grinding machine For surface treatment of metal parts Equipped with a conveyor belt Suitable for series production Compact industrial design Year of construction: 2014 (second owner) Includes: grinding media / accessories Optional: Dust extraction system (at an additional cost - year of construction 2021) The conveyor belt enables efficient and consistent product flow, making the machine very suitable for the rapid and reproducible post-processing of larger quantities of parts. The machine is currently still installed and can be viewed in working condition by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Hfodpfx Aezuykcegtol Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. Hsdpfx Ajwzmcbogtefl ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability Hsdpoztn N Dsfx Agtefl ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Hfedpfx Aoxzuiyogtol

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light Hfjdpfx Agoxfvrwotol • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Hfsdpfx Aezl Scregtsl Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Hfjdpfxjzxqz Ts Agtsl Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine