Used Coating Device for sale (13,579)

Condition: used, Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 X-ray fluorescence coating thickness measuring device Manufacturer: Helmut Fischer GmbH + Co. KG, Germany Type: XDL-XYZpT8 Model: FISCHERSCOPE X-RAY Machine type: X-ray fluorescence measuring device / coating thickness measuring device (XRF / RFA) For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF/RFA). The system is designed for measuring functional layers, corrosion protection layers, and various metallic coatings and is used in quality assurance, electroplating, surface technology, research, and laboratories. The device comes from a warehouse liquidation and is explicitly sold untested and without warranty. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence (XRF / RFA) Measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM stroke: 0–80 mm Djdpfx Alozl Ulvsbewb Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Equipment: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Measuring chamber with protective cover Software Operating manual Power connection Serial interface (Sub-D) Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Materials testing Laboratory Research and development Condition: Used. The device comes from a warehouse liquidation. Optical condition as shown in the pictures. The device has not been tested by us and is explicitly sold untested and without warranty. Scope of delivery: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. Dwedpfozu Tu Iox Albjb COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color Djdpfx Asxab Iyelbowb - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Dedozqf D Tspfx Albjwb Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: used, Year of construction: 2017, overall weight: 140 kg, terms of delivery: FCA Pegnitz delivery time: on request Dsdpfszz Axcjx Albswb terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device. Dwedszba E Ijpfx Albsb

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. Dwsdpozugqiofx Albjb This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Dodpfxsxbgrgs Albowb Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Dwodjun Sd Uopfx Albeb Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Djdpfxsv Nwgne Albowb Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity / payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Enhanced recirculation air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (ATS) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (ATS): 2 Rated temperature: 200 °C Electrical data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Dodjzg Tppepfx Albswb Weight: 275 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Dwjdpfx Aloytrufobob Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: excellent (used), Here we offer a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosive limit (LEL). Maximum temperature of the heating surface: over 750 °C. Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 sec. Enhanced recirculating air flow rate: 33 m3/h Total steam space: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TB) fixed at 300 °C Temperature selector limiter (TWB) adjustable above the nominal temperature by 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Dodpfxezd Rrce Albjwb Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A, rated power: 6.0 kW, connected load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Year of construction: 2014, condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 - stainles steel cyclone diam.: 500 mm Dodpfx Aljvxrm Usbowb - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Condition: excellent (used), Vötsch Type: LTU 60/60 Dsdjzg Tpvopfx Albowb Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Overall width 796 mm, Height 1725 mm, Depth 850 mm Load capacity / Payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air volume flow: 96 m3/h Purge time (5 air changes): 90 sec. Recirculation volume flow (enhanced): 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed at 300 °C Temperature selector limiter (TSL) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Temperature selector limiter (TSL): 2 Rated temperature: 200 °C Electrical data Rated voltage / Frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 Dwodpfezuzbcox Albeb BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: as good as new (ex-display), Year of construction: 2018, Very little used , condition as new ! FORMAT 45 X 90 CM FEEDER: Pile feeder with vacuum belt and automatic device for cleaning the valve. It is equipped with air blasts for spacing the sheets, when there is no suction. Front and side blowers for separating the sheets. Height, positioning, quantity and volume values are all adjustable. LAY REGISTER TABLE: Lay register table with round belts, in lower and upper position, anti-scratching for UV-coated and laminated sheets. CREASING: Die creasing. Easily replaceable matrixes thanks to a bayonet system that enables quick changes in creasing width (Optimum creasing with all paper grammages). DELIVERY: Delivery table for hand collection PROGRAMMING – CONTROLS: Colour programming touch screen. Dedoxwp N Hjpfx Albjwb Digital programmer to set creasing positions and all machine data. Jobs storage. Copy counter. Output counter. Programmable copy divider (batches).

Condition: used, maximum load weight: 12,880 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,625 mm, loading space volume: 52 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 2,850 mm, Year of construction: 2018, Vehicle No. G0123148 – Manufacturer: Krone. * Simple corner brackets * Outline marking on the side/rear * Load certificate Code-XL * Keyhole system inside * Forklift accessible Dodozx Ndyopfx Albjwb * Front wall niche * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points Financing available upon request. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Partial paint job. Chassis (KTL) coating with signs of wear. Valid UVV certification. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Dwsdpfx Aleydnlhobjb Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and lifespan of electronics

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Djdpfotu H Avex Albowb At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Technically and visually in very good condition. Dedpfethcflex Albjwb ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l Djdoxab Imspfx Albewb available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l Dwsdexab Itjpfx Albjb available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Dwjdpfsfy Am Uox Albjb

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Dwedpjzkh Syjfx Albob Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim