Used Coating Device for sale (13,580)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: Dwedpfezf E Hqox Albob - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: H_7348, warranty duration: 6 months, total length: 2,200 mm, year of last overhaul: 2026, total width: 190 mm, overall weight: 1,200 kg, funnel diameter: 190 mm, Used intermediate proofer BIP 72E WP Haton The BIP 72 E intermediate proofer was specifically designed for automated dough fermentation between rounding and dividing. Precise control manages the introduction of dough pieces into the trays. Subsequently, the dough pieces pass row by row through the tipping stations, according to the set fermentation time. The intermediate proofer operates in timed or continuous mode. Advantages of the device: Frame made of closed profiles, Dwodpfxjzw Ed Ts Albsb Teflon-coated tipping station to prevent dough pieces from sticking, Cradles made of stainless steel, Washable, easily removable, and air-permeable trays, Round trays for round dough pieces, UV lamps to prevent the formation of mold and fungi, Uniform climate inside the proofer chamber, Number of rows – 8, Number of trays: net – 360, gross – 416, Capacity – inlet on a photocell, Flat conveyor belt for up to 3600 pieces/hour, Single inlet with a photodiode, Diameter of polyethylene trays Ø 190 mm, Equipped with UV lamps, windows made of organic glass.

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter Dodpfx Alszyz Dbobewb The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Dsdpfeuwkr Dox Albswb Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Dwodpszcmcvefx Albob Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Dedpfx Alocnw U Djbowb Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, continuously adjustable Clearance height: 3 mm - 80 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By1 Dwjdoyah Uzepfx Albsb 1 chrome-plated metering roller, 174 mm diameter Electrical equipment: Operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switching devices in explosion-proof design Additional equipment: Individual drive for the metering roller, continuously adjustable, with oscillating metering roller squeegee Operating side: left Machine length: 1000 mm Weight: 1000 kg

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Dsdpfx Aloq Ixgljbjwb

Condition: new, Year of construction: 2026, Capacity: 5500 m³/h Motor power: 5.5 kW Voltage: 3-phase / 380 V Net weight: 700 kg Dimensions (L x W x H): 2289 x 1160 x 3063 mm Material: Galvanized sheet steel, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 0.9 bar Sound power level: 65 - 75 dB(A) Negative pressure: 2200 - 2500 Pa Filtration area: 30 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted for use in environments with dust explosion hazards in accordance with the requirements ATEX. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the machine finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection. Dodpfxozx Av Ao Albswb

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Dodpoy Iwy Defx Albowb Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, aluminum rims Features: - 6 lashing points - Shock absorbers + 100 km/h approval - Rear supports Net: €4,529.41 / Gross: €5,390.00 Article number: VC2113261516.05 Technical data: • Brand: Variant • Model: 1315 C2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 258 x 148 x 157 cm • External dimensions (LxWxH): 401 x 191 x 210 cm • Loading height of the floor: 51 cm • Permissible total weight: 1,350 kg • Unladen weight: 387 kg • Payload: 963 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • Stable V-drawbar, hot-dip galvanized • Frame with high torsional rigidity due to its robust design • Floor panel 15 mm thick • Side walls and roof made of multilayer wood, 12 mm thick, with UV-resistant plastic coating, BLACK • Interior light - LED mounted • Tailgate with gas springs and non-slip surface • Twist-lock and hinges galvanized • Side door, standard right front, approx. 68 cm, lockable with twist-lock • 2 maneuvering handles in front • Wheel shock absorbers + 100 km/h approval • Aluminum rims • 6 lashing points mounted on the floor (500 DaN/kg) • Maintenance-free rubber spring axles from KNOTT • Reversing aid • KNOTT overrun device and parking brake • Plastic fenders • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamp _____ Dedjzy Dcyepfx Albewb Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing eyes - Tailgate - Multiplex walls Net price: €3,108.40 / Gross price: €3,699.00 Article number: HKP113251315.02 Technical data: • Brand: Humbaur • Model: HK 132513-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 132 x 152 cm • External dimensions (LxWxH): 378 x 181 x 211 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,300 kg • Tare weight: 425 kg • Payload: 875 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • Tailgate with gas spring and non-slip surface (maximum load 300 kg) • Twist lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra tested • Automatic reversing system • ALKO overrunning device and parking brake • Plastic mudguards • Interior light installed • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center Dwodpezy Dxbofx Albsb _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear door Equipment: - 6 tie-down points - Multiplex walls - Single-leaf rear door Net: €3,151.26 / Gross: €3,750.00 Article number: HKP113251515.01 Technical data: • Brand: Humbaur • Model: HK 132515-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 251 x 151 x 152 cm • External dimensions (L x W x H): 399 x 200 x 212 cm • Loading height of the floor: 53 cm • Permissible total weight: 1,300 kg • Unladen weight: 450 kg • Payload: 850 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-drawbar, hot-dip galvanized • Longitudinal beams continuous • Single-leaf door at the rear • Twist-lock fastener and hinges galvanized • 1 maneuvering handle at the front • Tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra tested • Reversing automatic • ALKO overrun device and parking brake • Plastic fenders • Interior light installed • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Delivery possible throughout Germany - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Dsdpfozy Amdsx Albowb We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Dwodpfxoxhfqno Albsb Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: used, This listing is for theStuart SC6 Colony Counter The unit is in full working condition and is ready for immediate use Dwsdpsxhfyvjfx Albob The Stuart SC6 Colony Counter is an electronic device designed to streamline and improve accuracy in counting bacterial or fungal colonies on Petri dishes. Here’s what it offers Key Features Pressure-sensitive counting: Place a Petri dish on the built-in pad, tap a colony with a felt-tip pen or probe, and it registers a count on the digital display (0–999), with an optional audible beep Average count facility: You can count multiple plates, and the device automatically calculates averages and standard deviations Adjustable pad sensitivity: Customize the tap sensitivity via a dial to prevent miscounts Viewing options: Features bright, glare-free LED lighting with the option to switch backgrounds (light or dark) to enhance colony visibility BioCote® antimicrobial coating: The surface is treated with silver-based antimicrobial protection for enhanced hygiene

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Dedpovakdzefx Albjwb Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Dsdezy Dpmepfx Albewb Equipment: - 6 lashing points - Multiplex walls - 2-leaf rear door Net: €3,823.53 / Gross: €4,550.00 Article number: HKP113301518.01 Technical data: • Brand: Humbaur • Model: HK 133015-18P • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Interior dimensions (L x W x H): 304 x 151 x 180 cm • Exterior dimensions (L x W x H): 435 x 201 x 245 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 15 mm thick, with UV-resistant plastic coating • Stable V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • 2-leaf door at the rear • Twist-lock closure and hinges galvanized • 1 maneuvering handle at the front • Lashing points in the frame profile, tensile force 400 kg per lashing point, Dekra tested • Reversing aid • ALKO overrun device and parking brake • Plastic fenders • Interior light fitted • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about your requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, mistakes and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: -6 lashing eyes -Multiplex walls -2-leaf rear door Net: €4,327.73 / Gross: €5,150.00 Article number: HKP220301518.01 Technical data: • Brand: Humbaur • Model: HK 203015-18P • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 304 x 151 x 180 cm • External dimensions (LxWxH): 453 x 203 x 243 cm • Loading height of the floor: 57 cm • Permissible total weight: 2,000 kg • Unladen weight: 615 kg • Payload: 1,385 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multilayer wood, 18 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • 2-leaf door at the rear • Twist-lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra certified • Reverse assist • ALKO overrun device and parking brake • Plastic fenders • Interior light installed • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Dwjdpfx Aezy Dlhslbsb Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - 6 lashing eyes - Multiplex walls - 2-wing rear door Net: €4,411.77 / Gross: €5,250.00 Article number: HKP225301518.01 Technical data: • Brand: Humbaur • Model: HK 253015-18P • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 304 x 151 x 180 cm • External dimensions (LxWxH): 453 x 203 x 246 cm • Loading height of the floor: 57 cm • Permissible total weight: 2,500 kg • Unladen weight: 615 kg Dwsdezy Dylspfx Albsb • Payload: 1,885 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multi-layer wood, 18 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal beams continuous • 2-wing door at the rear • Twist lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra tested • Reverse automatic system • ALKO overrun device and parking brake • Plastic mudguards • Interior light installed • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. Dsdpjtu H Hcsfx Albjwb The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Condition: used, Year of construction: 2017, operating hours: 1,915 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Dwedpfx Alozwru Esbeb Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Dwsdjzk N Ehopfx Albeb Thermostatic temperature control via a dial thermostat Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Dwsdpfxjzug Sge Albjb • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Dsdpfozzz T Ejx Albjwb Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net: €8,025.21 / Gross: €9,550.00 Item number: UC6113251319.01 Technical data: • Brand: Unsinn • Model: UKT 6C 2513-13-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 135 x 190 cm • External dimensions (LxWxH): 391 x 192 x 248 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 625 kg • Payload: 675 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen-printed plywood, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich construction • Interior and exterior skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigeration unit toggle fastener and stainless steel door latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Fully encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant • Electronic defrosting system for the evaporator • The control display is lockable and therefore protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230-volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse drive automatic • Plastic mudguards • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load-bearing capacity 500 kg _____ Djdpfx Ajzy Dwqslbjwb Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -