Used Cnc Slant Bed Lathe for sale (17,387)

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 52mm bar capacity, 12 station VDI30 turret, 14.7kW Spindle Motor, Spindle Speed 5000rpm, Djdpfjx Dk Azsx Ab Tswf collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Dsdpfxjx Di Rqs Ab Tjwf Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Mazatrol control, 77 mm spindle bore, sub spindle, driven tools, chip conveyor, chuck on both spindles Dsdpfjx Dh Axsx Ab Tswf

Condition: like new (used), Max. workpiece diameter: approx. 200 mm Number of spindles: 2 Number of tool stations: 12 Dedpfx Abox Ddnkj Tewf Control system: SIEMENS Sinumerik ONE Handheld control unit: KUKA Chip conveyor: KNOLL 280 S-1/160, year of manufacture 2022 Cooling unit: DELTATHERM RKV 5.5, year of manufacture 2022, net weight approx. 190 kg, connected load 400/460 V, 50/60 Hz Handling robot: KUKA Industrial Robot Cybertec-2 Series, year of manufacture 2022, net weight approx. 282 kg, payload approx. 22 kg Robot control unit: KUKA KR C5 Dualcap AC, year of manufacture 2022, connected load 3 × 380–480 V, 50/60 Hz Coolant filtration unit: KNOLL KF 150/950, year of manufacture 2022 Air filtration unit: AFS 1100, year of manufacture 2021, net weight approx. 70 kg

Condition: used, Year of construction: 2000, Technical details: Dwedsx Dcgxopfx Ab Tsf turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Djdpfx Asx Dcbpsb Tswf Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, Dwsdpfxjx Dk Ahj Ab Tsf 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: like new (used), Year of construction: 2006, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, spindle motor power: 15 W, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Dsdpfxex Dbxge Ab Tewf Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC control Dwodpfxewqpn Eo Ab Tof Spindle hours: 8,541h Technical details Swing over carriage: 800 mm Turning length: 3,200 mm Swing over bed: 1,030 mm Standard turning diameter: 750 mm Spindle bore: 181 mm Bar capacity: 164 mm X-axis travel: 471 mm Z-axis travel: 3,235 mm Rapid traverse (longitudinal/transverse): 15 / 20 m/min Spindle speed: 3,000 rpm Spindle motor: 45 kW Turret: 12 / 6 BMT 85 Driven tool motor: 7.5 / 5.7 kW Driven tool speed: 3,000 rpm Total power requirement: 62.2 kVA Machine weight: approx. 22 t Dimensions: 7,357 x 2,710 x 2,590 mm Accessories: 12-position turret with driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm) Video available

Condition: used, Year of construction: 2007, Doosan Puma 280LM Year 2007 Dwsdpfex A Tzdox Ab Tsf Fanuc OiTC with Manual Guide C-axis with driven tools Turning length 1030 mm Turning diameter 420 mm Z-axis 1100 mm Spindle bore 76 mm Mounted SMW autoblock 315 mm chuck with 91 mm bore BMT 55 turret Tailstock Tool probe Chip conveyor Documentation Very good condition

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Djdpox A R U Iefx Ab Tewf Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: refurbished (used), Year of construction: 2014, turning diameter over cross slide: 480 mm, turning length: 680 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, spindle motor power: 22 W, Brand: Hyundai-Wia Model: L-300/MSA Category: CNC Lathes Year of manufacture: 2014 CNC Control: FANUC Series 32i-Model A Machine weight: 7,000 kg Machine dimensions: Length: 4,780 mm Width: 2,055 mm Height: 2,000 mm Capacity: Maximum swing over bed: 750 mm Maximum swing over carriage: 480 mm Maximum turning diameter: 410 mm Maximum turning length: 680 mm Bar capacity (spindle/sub-spindle): 76 mm / 65 mm Travel: X-axis: 290 mm Z-axis: 750 mm ZB-axis: 700 mm C-axis: 360° (minimum indexing angle: 0.001°) Dwsdpfox Elzkex Ab Tsf Spindle: Spindle diameter: 254 mm Spindle speed: 3,500 rpm Spindle nose: ASA A2-8 Spindle motor power (max./cont.): 22/18.5 kW Minimum C-axis control angle: 0.001° Sub-spindle: Sub-spindle diameter: 210 mm Sub-spindle speed: 4,000 rpm Spindle nose: ASA A2-6 Sub-spindle motor power (max./cont.): 11/7.5 kW Minimum C-axis control angle: 0.001° Turret: Turret stations (live tool capable): 12 Live tool speed: 4,000 rpm Live tool motor power (max./cont.): 5.5/3.7 kW Turning/boring tool dimensions: 25x25 mm or 50 mm Rapid traverse: X / Z axis: 20,000 mm/min Z axis: 24,000 mm/min Accessories and additional features: Chip conveyor Coolant tank with 20 bar high-pressure wash pump Automatic tool setter with push button and M code (down/up) Various live and static tool holders included Comprehensive documentation: manuals, electrical diagrams, CE declaration

Condition: good (used), Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock Travel: 175 mm Tailstock Spindle Taper: Morse Taper: MT4 Quad Stroke: 140 mm Dwodsx Elw Ejpfx Ab Tef Quad Diameter: 95 mm Driving Force: 17 kN Power Supply: 50 Hz, 3x: 380 V Total Power Requirement: 65 kVA Spindle Speeds: Infinitely Variable from 0 rpm to 4000 rpm Spindle Bore: 77 mm Tool Shank Cross-Section: 25x25 mm Swing Diameter over Bed: 420 mm Maximum Swing Diameter: 250 mm Turntable Slide: Longitudinal Travel (Z-Axis): 1150 mm Cross Travel (X-Axis): 230 mm You can find more items – new and used – in our Shop! International shipping costs on request!

Condition: good (used), Year of construction: 2007, machine/vehicle number: MP6200Y, ● Delivery terms: Ex works, loaded onto truck ● Location: 73547 Baden-Württemberg - Lorch ● Availability: Immediately, subject to prior agreement ● Payment terms: Advance payment - by bank transfer ● Internal reference no.: KLAU ● Can be inspected under power: Yes Technical Data: ● Control: Mazatrol 640 T ● X-axis travel: 240 mm ● Y-axis travel: 100 mm ● Z-axis travel: 495 mm ● Max. machining diameter: 320 mm ● Bar capacity: 51 mm ● Main spindle speed: 5,000 rpm ● Main spindle motor power: 22 kW ● Sub spindle speed: 5,000 rpm ● Sub spindle motor power: 22 kW ● 2 x 12-position turrets with driven tools Djdsx Elriopfx Ab Towf ● CNC option package EIA / ISO programming ● Tool eye ● Partition wall ● Automatic parts catcher with conveyor belt ● High pressure coolant 10 bar Scope of delivery: ● LNS short bar loader Quick Load Servo III ● Mayfran ConSep 2000 II chip conveyor Dimensions & Weight: ● Installation dimensions L x W x H approx.: 5000 x 3500 x 2000 mm ● Weight approx.: 8,400 kg Information: ● The machine has been fully inspected and geometrically measured by a Mazak specialist. It is immediately ready for operation! ℹ️If you have any questions or would like to arrange a viewing, please contact us! Additional notes: ►Upon request, we can offer transportation to the destination ►The quoted price is net, plus VAT ►The goods are sold excluding any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale to business customers only❗

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside Dwsdpfjv Iplaex Ab Tsf -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: ML0335-000100, turning diameter over cross slide: 400 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 12,600 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,693 mm, total length: 2,570 mm, total width: 1,645 mm, torque: 135 Nm, overall weight: 3,400 kg, The Lynx 2100 LB is a compact-format 2-axis CNC lathe designed for all turning operations within the specified working range and suitable for a wide variety of materials. It is equipped to allow production start-up at short notice. Features include a parts catcher, internal tool measurement, high-pressure coolant, and a tailstock. The CNC control system is the Siemens S 828 D, offering numerous machining cycles and graphical support for fast, shop-floor-oriented programming. Dedox Ei Dpjpfx Ab Tewf

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as Dsdpjxbukwjfx Ab Towf hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: good (used), Year of construction: 1999, Machine is in very good working condition. Dsdjx Awnuepfx Ab Tewf

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t Dwsdpex Avp Refx Ab Tsf dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 300 mm, feed length Z-axis: 500 mm, FOR SALE CNC LATHE Twin-spindle lathe Brand: CMZ Model: TL20 S Year of manufacture: 2006 CNC GE Fanuc Series 21i-TB Tool turret capacity: 12 stations Number of axes: 3 axes Working area: X: 280 mm, Z: 500 mm, B Djdpfxsx Au R Ho Ab Tjwf Working speed: 4,000 rpm and on sub-spindle: 5,000 rpm Spindles: 2 spindles

Condition: used, Year of construction: 2007, Technical details: Dedpfxex Aq Hwe Ab Tjwf turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets Dodex Ed A Depfx Ab Tswf - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, GURUTZPE A-1200 CNC Lathe Brand: GURUTZPE Model: A-1200 CNC Year of manufacture: 2007 FAGOR 8055 TC CNC Distance between centers: 3000 mm Height: 565 mm Bore diameter: 150 mm Power: 37/56 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Main technical specifications: - Axes: 2 axes Dwjdpfxjx Au D Tj Ab Tsf - X-axis travel: 600 mm - Spindle speed: 5 – 1,200 rpm - Main motor power: 22 to 30 kW - Spindle type: Hydraulic chuck - Tool holder type: European standard for heavy CNC lathes - Rapid traverses: 8 / 10 m/min depending on axis - Guideway type: Hardened prismatic guides - Floor dimensions (approx.): 6,000 × 2,000 × 2,000 mm

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm Dsdpfsx Aq Hkox Ab Tswf turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. Dwjdpfox Edz Tox Ab Tsf CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.