CNC lathe

XYZ CT 52

Condition: excellent (used), Year of construction: 2021, 2021 XYZ CT52 LR CNC Slant Bed Lathe With Siemens 828D (Shopturn) Control Dodpfxjymmb To Aa Ejcd Ø170mm 3 Jaw Power Chuck. Maximum Swing Ø300mm. Maximum Swing Over Cross Slide Ø220mm. Maximum Turning Ø180mm. Maximum Turning Length 300mm. Axis Travel 'X'=165mm, 'Z'=315mm. Maximum Cutting Feedrate 'X & Z'= 20m/min. Spindle Bore Ø61mm. Bar Capacity Ø52mm. Maximum Spindle Speed 4,500rpm (7.5kW Motor). Tailstock Quill Ø60mm, Quill Travel 90mm. 10 Station Turret. Turning Tool Shank 20 x 20mm. Boring Bar Holder Ø30mm. S/No. STR00107 (2021). With Coolant System, Swarf Tray, Tool Setting Arm, Foot Switch, Signal Tower, Toolkit & Manuals. Weight 2,200kg.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Dcjdpet Dmlfefx Aa Eod Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Dcodpfx Aajv Hxbbj Ejd

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3096524, MACHINE SPECIFICATION Dodpfox R Sb Isx Aa Eocd Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Parts catcher Hydraulic tailstock Tool presetter Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, Dodsq R Tnzspfx Aa Escd spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm Dcsdpfoyb S Ihjx Aa Esd control Heidenhain greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2016, 560mm swing over bed, 350mm Swing over the Cross-slide, 780mm swing in the Gap, 1750mm between centres, Dcsdpjw Rcuqefx Aa Eed 104mm spindle bore, 1800rpm spindle in 2 ranges, 11kW Spindle Motor, coolant, Prototrak SLX Control, 3 & 4 jaw chucks, QCTP & holders, fixed steady, tailstock.

Condition: used, Year of construction: 2002, Lathe Mori Seiki CL 253 B, year of manufacture 2002 Dcsdpexyvkpjfx Aa Esd

Condition: like new (used), Year of construction: 2018, operating hours: 10,974 h, Machine Name - Dugard XP Machine Model - XP 1000 S.N PV10180957 Y.O.M 2018 Descriptions - Fanuc Control 0iMF X axis travel =1050 mm Y axis travel = 540 mm Z axis travel =560mm XYZ Rapid traverse =44/44/25m/min Table size = 1200mm x 480mm Dsdpfx Aajuxd D Ao Escd 12,000 Rpm spindle Max load capacity on the table 1176kg 40 Spindle taper 36 station ATC Coolant tank TSC Swarf conveyor

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, Dcsdpfxoyffz No Aa Eed collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.