Used Cnc Milling Center for sale (24,465)

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Ljdeu Hq Rlepfx Ab Ueah Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X axis travel: 260 mm - Z axis travel: 590 mm - Y axis travel: +/- 50 mm - Maximum turning diameter: 356 mm - C axis indexing increment: 0.001° - Maximum turning length: [specify mm] - Cutting feed rate X, Z, Y: [specify mm/min] - Swing over bed: [specify Ø mm] - Swing over cross slide: [specify Ø mm] - Bar capacity: Ø 65 mm (main) / Ø [specify] mm (sub) Laedpfxewdrfgo Ab Uoh - Maximum rapid traverse X, Z: [specify m/min] - Main spindle: L-SPINDLE 12” - Main spindle speed: 5,000 rpm - Main spindle power: 18.5 kW - Main spindle torque: [specify Nm] - Main spindle bore: [specify mm] - Main spindle nose: A2-6 - Sub spindle: - Sub spindle speed: 6,000 rpm - Sub spindle power: 11 kW - Sub spindle torque: [specify Nm] - Sub spindle bore: [specify mm] - Sub spindle nose: A2-5 - Upper turret tool positions: 12 - Number of driven tool stations (per turret): 12 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status lamp - Fixed tool holders - Parts extractor MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: good (used), Year of construction: 2009, Machine used only for plastic. thry spindle 95.mm Technical data shown on picture. 27.03.2025. With machine will come another spannpfutter with possibility 80 mm. Parts shown by hand not come. Ledpou Ibnqofx Ab Uoah

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Laedpouqkttjfx Ab Uoh

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM Laodpfxsxfa Ipo Ab Uoh SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm Lasdpfxsw I R Nds Ab Ush total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min with CNC Control TX 8 D C-axis driven tooling 14 station turret head tailstock, steady as NC-axis chip conveyor and coolant attachment *

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm Laodov E R E Nepfx Ab Ueh spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: MSG-501 Axes X axis travel (mm): 215 Z axis travel (mm): 490 Y axis travel (mm): +40 / -30 Max. Turning Diameter (mm): - C-axis increment (°): 0.001 Max. Turning Length (mm): 510 Cutting feedrate X, Z, Y (mm/min): - Swing over bed (mm): Ø 300 Swing over cross slide (mm): Ø - Bar capacity (mm): Ø 56 (main) Max. rapid traverse X, Z (m/min): 24 Main Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Torque (Nm): - Main spindle bore (mm): - Main spindle nose: A2-5 Sub-Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Lasdpfxoxfv E Ds Ab Ujh Torque (Nm): - Sub-spindle bore (mm): - Sub-spindle nose: A2-5 Turret Number of turret positions: 12 Number of driven tool stations per turret: 12 Driven tool speed (rpm): 6,000 Driven tool power (kW): 5.5 EQUIPMENT Chip conveyor: Included LNS Quick Load Servo II bar feeder: Included Overhead Gantry. MSG-501 (Fanuc) CNC Control: Included Set of fixed and rotary tool holders: Included 3-color status lamp: Included Bar loader interface: Included Manuals: Included MACHINE DIMENSIONS Length (mm): 2,705 Width (mm): 2,000 Height (mm): 2,120 Weight (kg): 5,800

Condition: excellent (used), Year of construction: 2002, Machine in perfect condition. Laodpfx Absrgpv Ts Ujh Can be inspected during production any time

Condition: used, Year of construction: 2005, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: 175743, Hello, for sale is a Mazak QTN 100 CNC lathe. Machine Parameters: Laodpfx Aboxg Iw Io Ush Model: QTN100 CNC Control: MAZATROL 640 T NEXUS Serial No.: 175743 Production date: 01/2005 Weight: 3600 kg / 2700 lbs Elementary diagram: D D0311070021 Main Circuit: 3AC 400V 50/60Hz Control Circuit: AC100V DC24V Main Motor: MAX. 31A 400V Rated Capacity: 24 KVA Max. turning diameter over slide: 280 mm Max. turning diameter: 309 mm The lathe was purchased in Katowice, Poland. It has very low operating hours as, due to the pandemic, there were no contracts. Operated on a single shift, unused since the pandemic started. Year of manufacture: 2005. The machine is available for inspection by prior telephone arrangement. Located in Wrocław. Sold with an invoice. My asking price is 120,000 PLN net. If you are interested, please contact me at +48665393715.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Laedpfx Aew Nklhjb Uoh Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° Laedpfx Abovyli Ej Ujh turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 2x axial driven and numerous rigid tool holders 4x radiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted.

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm Lodevzhiqspfx Ab Ueah max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: excellent (used), Longitudinal Cutting Saw MZ Project LC 5000 Lsdpfxjxcx Sbo Ab Ujah Cutting length: 5000 mm Cutting height: 100 mm Cutting speed: 0–60 m/min Saw blade size: 350–500 mm Saw blade bore diameter: 35 mm Saw blade rotational speed: 3000 rpm Main motor power: 11 kW Machine dimensions: 6900x1700x1840 mm Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 17,500 h, functionality: fully functional, machine/vehicle number: MA201301, feed length Y-axis: 112 mm, bar diameter (max.): 80 mm, overall weight: 15,000 kg, three turrets - threeY axis - 80 mm bar capacity - parts catcher gantry type -barfeed interface - very well tooled - low hours Lasdpfx Abot E A Acj Ush

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Lajdpfxjxf Ikls Ab Ujh

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Ljdpetrhq Hsfx Ab Ujah Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Max.turning diameter 676mm 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Gantry loader Manuals Lsdjv A Ey Aspfx Ab Ueah

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm Lodpfx Absvzhiwe Ujah x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm Ljdpfsxcbktsx Ab Ueah max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system Laodjt Ac Efjpfx Ab Ush - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle Lsdpfx Ajtqmqweb Usah - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm Laedpfx Aov E R E Ajb Ueh C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2005, turning diameter 320 mm turning length 600 mm control Plus iT Heidenhain swing diameter above cross guideway 365 mm turning speed range - main spindle 25 - 5.000 min/-1 power capacity - main spindel 28 / 21 kW max. Torque 320 / 240 Nm spindle nose 170h5 chucking diameter 215 mm spindle diameter in front bearing 130 mm max. bar capacity 65 mm number of toolpositions 12 pos. tool taper VDI 30 Number of driven toolspositions 12 pos. tool spindle speed range max. 4.500 min/-1 power capacity driven tool-stations 3,1 kW Ljdpfx Abewu Hhks Ujah max. Torque 10 Nm x-travel 250 mm z-travel 635 mm tailstock 580 mm taper of center MK 4 diameter of quill 120 mm quill stroke 150 mm rapid traverse X: 24 / Z: 30 m/min total power requirement 44 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 4,8 x 3,7 x 2,0 m CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - only 9.705 Spindle hours - Control Extension Turn Plus - Coolant Tank 500 L

Condition: used, Year of construction: 2016, turning diameter max. 630 mm turning length 2.000 mm control 840 D sl Operate Celos distance between spindles 2.260 mm type ISM 102 turning speed range - main spindle 0 - 4.000 min/-1 power capacity - main spindel 33 / 40 kW max. Torque 580 / 700 Nm inner draw tube diameter 104 mm tool taper Capto C6 number of toolpositions 100 pos. max. tool diameter 140 mm Lasdpfx Aowyxw Uob Ush max. tool weight 12 kg max. tool length 400 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 13,2 / 22 kW max. Torque 60 / 100 Nm tool taper Capto C6 B-Axis +/- 120 ° x-axis 650 mm y-axis +/-150 mm z-axis 2.050 mm type ISM 102 mm Spindle speed range subspindle 0 - 4.000 min/-1 power capacity - Sub spindle 28 / 37 kW inner draw tube diameter 104 mm total power requirement 70 kVA weight of the machine ca. 24 t dimensions of the machine ca. 7,5 x 3,0 x 3,0 m CNC - Turning- and Millingcenter DMG Gildemeister - CTX beta 2000 TC - Main- Sub- and Millingspindle - Betriebsstunden: Strom-Ein: ca. 28.007h / Spindellauf: ca. 11.868h - incl. steady rest slide - Chuck flushing device on the main spindle, external - Chuck flushing device on the counter spindle, external - Coolant supply through the counter spindle - Compressed air cleaning of the safety windows of both work doors - Off-center turning and milling operations - Gear milling using the hobbing process - Technology cycle for applying an alternating speed for vibration-critical setups - WITHOUT three-jaw chuck (main- and counter spindle) - WITHOUT steady rest (carrier only) - WITHOUT tools - WITHOUT extraction system - WITHOUT measuring probe