CNC vertical milling center

MORI SEIKI MV

Condition: used, Year of construction: 1986, Mori Seiki MV45/45 from 1986 with Fanuc 11M control, 820 × 555 × 550 mm travels, BT 45 spindle (4.500 rpm, 7,5 kW) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle (15 bar, M50-switched, rotary union through pull stud) and two mechanical gear stages deliver 200 Nm torque; box guideways ensure rigidity. Includes approximately 75 BT 45 tool holders with through-coolant passage and 20 pull studs. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 Lhodpfxozy Svuj Abzjl EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain Lsdpfx Asx R Em Debzohl turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 1999, Mori Seiki MV-653/50 Heavy Duty Vertical Machining Centre. Serial No. 92 (1999) with MSG-502 Control, Table Size, 1700 x 660mm, 50 INT Taper, 80 Position ATC, High Pressure Coolant, Through Spindle Coolant, 15,000rpm Max Spindle Speed, Swarf Conveyor Ledpfxsz Ar Ats Abzehl Please Noter: Nikken 500mm dia 4th Axis & Powered Tailstock not included can be purchased as a separate lot. Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Lhsdszy Efiopfx Abzel Delivery is the customer's responsibility, but we can assist with packing and loading if required.

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Lhjdpfx Aoxg Nd Aobzsl Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: used, Year of construction: 1991, Mori Seiki MV-40B Year of manufacture: 1991 Lhjdezwt Elepfx Abzol Control system: Fanuc/Mitsubishi Travel distances X/Y/Z: 800x400x500 Machine weight: 6050 kg Condition: Still connected to power, fully functional.

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA Lsdpfx Absy S T T Uozjhl rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Lhsdpfx Abjt Rmdzozol Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Machining Center 3-Axis X, Y, Z Mori Seiki Model MV-653/50 Year 1999 Lhjdpfjzp E E Iex Abzjl CNC Fanuc MSG-803 Phase 3

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Year: 1990 Lodpfx Absy S T D Tszshl

Condition: excellent (used), pressing force: 150 t, table width: 3,100 mm, For sale: 1 used High quality / very good condition Bystronic Xpert 3metre x 150ton cnc pressbrake with powered lifting aid Bystronic Beyeler Xpert 150×3100 Make: Bystronic Model: Xpert150 Lhjdpfsttl D Nex Abzjl Year / new: 2010 Total axis: 9 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 - and Powered Front Lifting Aid Hydraulic tool clamping Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 150ton Fully serviced with Bystronic Uk General Information: Model: XPERT150x3100 Manufactured: 2010 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Control: Fanuc EQUIPMENT Accessories as shown in the pictures Ljdpfx Absy Sluqezjhl

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 3449, travel distance X-axis: 800 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 700 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Max. workpiece weight: 700 kg Max. spindle speed: 8,000 rpm Spindle taper: ISO 40 Ljdpfx Aoyyi Ukobzehl MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,800 mm Total weight: 6,050 kg EQUIPMENT 20-position tool carousel with ISO 40 tool holder Various tool holders Documentation Fanuc CNC control

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg Lhjdpegin Ndofx Abzjl

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW Lhedpfowvblaox Abzol weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *