Used Cnc School Maschine for sale (10,699)

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Tjdpjzxpkmofx Amroc

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: Tjdpey Sub Hsfx Amrsc CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Todpfx Amewfdm Eorec

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Tsdjy Stahopfx Amrsc Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets Tjdpfx Aswlqpysmrec - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Tedpfstu H Tuox Amroc Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Todsy Ibgzspfx Amrjc Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: refurbished (used), Hydraulic pump, Sperry Vickers Type: GPA2-10-E-30-R-GE 334 with attachment, gear motor coupling, Leroy-Somer from Kupplungstechnik Todpfx Amjd Szm Torsc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles Tjdpfjvppw Ssx Amrjc -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Tsdpfx Amozt A H Rjroc Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. Tsdpfx Asykmmkemroc If you have any questions or need more information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Todpfxjzizkye Amrsc Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Todpfx Aozr D Nwsmrsc Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions: 4835 x 2900 x 2205mm

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Todpfxszu T Smj Amrsc Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm Tsdpfxeuu Ntgj Amrjc - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement Location - Poland

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Tjdpfx Aewtpfpjmrec ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 21032017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance Z-axis: 200 mm, table length: 3,100 mm, table width: 2,100 mm, For sale: CNC milling plotter from Polska Grupa CNC. In continuous operation, ready for immediate use. Used for machining chipboard, MDF boards, kitchen countertops, and compact countertops. A used vacuum system (vacuum pump with reservoir) is also included with the plotter. Tsdpfxszvykrs Amrjc Key information and technical condition: Model: 2030 Special Year of manufacture: 2017 Power: 8kW Spindle power: 5.5kW Spindle: Brushless electric spindle, liquid-cooled in a closed system Spindle speed: 6000 - 24000 rpm Power supply: 400V (3 phases) 50Hz Working area: 2100mm x 3100mm Z-axis range: 200mm Condition: very good, ready for immediate use Usage history: operated in a single-shift mode, 8 hours per day.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish Tsdpfxozwdv Us Amrec • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Tedpfx Amezhaqcersc

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license Tsdpfx Aezfv T Ijmrsc • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: Tsdpfx Asz Hc T Uemrsc X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. Tjdpfor Ilb Ssx Amrsc The machine is still in daily use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: used, Year of construction: 2021, functionality: fully functional, operating hours: 2,460 h, number of axes: 4, number of slots in tool magazine: 6, actuation type: electric, table length: 15,000 mm, table width: 1,000 mm, Equipment: CE marking, For sale: CNC milling plotter Sentinel E 1015, purchased for wood milling applications. In practice, the machine was used exclusively as a cutting machine for corrugated cardboard. It was not used for heavy-duty wood or metal processing, and its components were not subjected to loads associated with such milling. Technical and visual condition: excellent. Todpfsz Drmxex Amrsc Condition and usage history as declared by the seller. P A R A M E T E R S / S E T C O N T E N T S Specifications and equipment ATC spindle, linear tool changer, and vacuum table with rotary vane pump. Working area X: 1000 mm / Y: 1500 mm / Z: 300 mm Kinematics: Linear guide Linear transmission: Structural rocker system ATC spindle: Power 8–9.6 kW; automatic tool change Spindle parameters: 24,000 rpm; ceramic bearings; ER 32; ISO 30 Tool changer: Linear, for 6 tools Drives: Digital AC servo drives: 4 × 400 W Vacuum table: HPL plate Machining technology: HSM (High Speed Machining) Measuring systems: Material height sensor; tool length sensor Tool cooling: Compressed air Material clamping: 3-pin clamping system Control: Control cabinet with computer, keyboard, and mouse Tools and accessories included Tool holders: Complete set of 6 ISO 30 tool holders ER 32 collets: Ø 3, 4, 6, 10, 12, and 16 mm Table accessories: Vacuum table seals: 30 m; 2 vacuum table supports Rotary vane vacuum pump included Model: C-VRL 301 Zephyr¹ Motor power: 5.5 kW Nominal capacity: 290 m³/h Final pressure: 150 hPa (mbar) ¹ Designating the pump according to the provided specifications; to be confirmed on the nameplate. M A T E R I A L S / M A C H I N E D E T A I L S Range of applications Machining capabilities depend on the tool used, material thickness, operating parameters, and machine configuration. Wood and wood-based boards: Wood, plywood, OSB, MDF, HDF. Metals: Aluminum, brass, bronze, and other metals, depending on the selected machining technology. Composites and technical boards: Composites, conglomerate, Corian, HPL, Dibond. Plastics and modeling materials: Prolab, polyurethane foam, polystyrene, expanded PVC, Plexi, polycarbonate, acrylic. Materials for cutting with an oscillating head² Technical polyurethane foam, sponge, cardboard, corrugated board, film, leather, fabric, rubber, plastics; Kryngielit, Gambit, Polonit, and other materials and boards.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Todpfx Asx S Etmjmrsc Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Tjdpoxgu R Iofx Amrjc Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring