Used Cnc Boring Mill for sale (17,586)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, turning length: 2,260 mm, turning diameter over cross slide: 690 mm, turning diameter: 690 mm, spindle motor power: 40,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 115 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,260 mm, rotational speed (min.): 4,000 rpm, chuck outer diameter: 500 mm, spindle nose: A11, swing diameter over bed slide: 690 mm, tool length: 500 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 20,000 N, Equipment: rotational speed infinitely variable, Overhauled 5-Axis CNC Turning-Boring-Milling Centre WFL M60 Millturn / 2000mm with control Siemens Sinumerik 840D PL. YOC: 2004 Iodpfx Ahsyuu A Iovsap The machine is completely overhauled, fully checked and fully working. The Turninmg -boring-milling und and the tailstock are completely refurbished. Milling spindle and spindle bearings are new. Cables and hydraulic hoses area also new. The machine geometry is within the original protocol values of a new machine (with measuring protocol). The machine is equipped with steady rest slide and tailstock (both with autom. Positioning and extremely rigid hydraulic clamping on the bed. Chuck and steady rest according to customer requirement (brand new items will be included). Chuck dia. Max. 500mm and steady rest max. 380mm opening dia. Tool system is HSK100 (external 90 station magazine with ATC). The machjine is equipped with glass scales for all linear machining axis. Furtthermore the machine is equipped with a 80 bar high pressure pump for deep hole drilling and 2t feed force for Z, X- and Y axis. The B-axis increment is 0.001° and is equipped with and additional indexing system with extremely high torque. Putting into operation and Training can be offered upon request. If rquired the outside colour can be adjusted according to customer requirements. Main spindle: 40kW (S1) Milling spindle: 25kW (S1) 4000rpm Tool system: HSK100 Magazin: 3x30 Plätze

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA Iaodpexcgtgefx Ahvep - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK AND SINUMERIK 840 D CONTROL SYSTEM Isdpfjul S Eyex Ahvjap

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm Iasdpfxeym Nfue Ahvop W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Iodjym Ndwopfx Ahvoap Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm Iajdpfx Asym Nbpohvsp 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Iaodpfx Ahoymc Ipjvsp Serial Number 6644-1 Chuck manual 48 inch, supplied with jaws Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Iedpfsyagidjx Ahveap Including angle head Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 13,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 30 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 30 m/min, total width: 7,000 mm, total length: 21,000 mm, total height: 5,100 mm, overall weight: 80,000 kg, mount diameter: 50 mm, The Pama Speedram 1000 is a versatile and powerful floor drilling and milling machine designed for heavy industrial applications. This machine offers advanced features and specifications that meet the highest standards of precision and efficiency. PAMA automatic head change system PAMA MG4 high speed head: 8000 rpm & 20 kW PAMA CU130-90S tool changer: up to 1300 kg tool weight Chip conveyor: 235 mm and 1200 mm outfeed height Double base plate field: 4000 x 2500 + 4000 x 2500 mm Spindle torque: 1525 Nm Floor drilling and milling machine: cast iron column, gray cast iron, hydrostatic guides, geometric compensation RAM type: 360 x 400 mm with spindle Ø150 mm Note: No cooling system, dry operation. X - axis: 13000mm Iaodpfeu Avwvsx Ahvjp Y - axis: 3500mm Z - axis: 1000mm W - axis: 700mm Speed: 6 - 3500 (8000)Rpm Power: 37kW Ram dimension: 360 x 400mm Tool holder: 50ISO/Bt/Mk Feed X - axis: 30000mm/min. Feed Y-axis: 20000mm/min. Feed Z-axis: 30000mm/min. Feed W-axis: 30000mm/min. Tool changer: 90 Control: 840D Number of controlled axes: 4 Length: 21000mm Width: 7000mm Height: 5100mm Weight: 80000kg

Condition: refurbished (used), Year of construction: 2008, WFL Millturn M120X/3000 Iaodpfx Asl Smhlohvep WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 Iajdpfx Aou Hl R Tohvop TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Iodpfx Aexn I U Njhvoap Y-travel: 1,000 mm Z-travel: 700 mm Tool holder: SK 40 Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Iedpfx Aou Dahnohvoap Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic Iodpow Iu Nhefx Ahvjap X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: used, Year of construction: 2014, SHIBAURA BSF 34-23 CNC Siemens 840DSL x=13000 mm y=5000 mm z=3250 mm Rotary table 5000x4000mm, max load =80 to, travel 3000 mm It was completlly retroffited with CNC SIEMENS 840 DSL. Iasdpfx Ahjcr Rkdovsp Video with the machine working is available on request. Complete documentation is available. More details on request.

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Isdpfxjcfkn Uj Ahvoap Floor plates 6 pcs. 2000x4000 It was retroffited with CNC Siemens 840D More pictures and details on request. Video with the machine working is available on request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1083252, Machine Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-10,000rpm Spindle motor 11.25kW Rapid feed rate 30.5m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine Equipped with:- Iodjyt Hknjpfx Ahvoap HRT 160 4th axis Rapid tapping Coolant system Lighting Guarding

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Iaedpswkrq Aefx Ahvep Lighting Enclosed guarding Manual

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Iasdpfsxv Su Nsx Ahvsp Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h Iedpfx Aoymxi Aehveap EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Ijdpfx Ajyk Thuehveap Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Fitted vice Documentation

Condition: ready for operation (used), Year of construction: 1991, operating hours: 910 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 4,000 rpm, controller model: TNC 426 / 430, The machine control was renewed in 2004! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 500 mm Additional travel: 160 mm Spindle diameter: 95 mm Spindle taper: SK 40 Spindle speed range: 25 - 4,000 rpm Table dimensions: 730 x 630 mm MACHINE DETAILS Control: TNC 426 / 430 Total power requirement: 5 kW Dimensions & Weight Space requirement: approx. 4.5 x 3 x 3 m Transport dimensions: approx. 4 loading meters, height: 2.60 m Machine weight: approx. 5,000 kg Operating hours: 3,628 h Program hours: 910 h EQUIPMENT Electronic handwheel Documentation Iodpfeyrdv Ssx Ahvoap

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB Iajdpfxeyu Tucj Ahvop If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Iedpfx Aox Tqkmshvjap Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD Iasdpfx Aox Th Nyohvjp BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER