Used Cnc Milling Center for sale (24,476)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring Ncsdpfx Aoxmhdned Njl - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM MAX SWING OVER BED 770 MM Nsdpfx Adjyciq Ae Necl SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 01224, turning length: 750 mm, turning diameter over cross slide: 520 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, chuck outer diameter: 250 mm, We are offering this used OKUMA HOWA ACT 4 CNC turning and milling centre, year of manufacture 1985. Manufacturer: OKUMA HOWA Model: ACT 4 Year of manufacture: 1985 Condition: used Nodpfxeycg Tzs Ad Necl Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling centre CNC control: Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm 12-position turret Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Incl. various tool holders New monitor: flat screen Machine under power. Data sheet, documentation and manuals available Data transfer possible via laptop

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm Nsdpfx Asud Al Hsd Necl y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 80801, turning length: 1,000 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 1,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC turning and milling center by Mazak, model 40N-ATC N/C (ST40ATC), year 1989. Mazatrol T-3E control, 4 axes, 30-position tool changer, driven tools, chip conveyor. Ncsdpfxoyccl Hs Ad Nol

Condition: like new (used), Year of construction: 2019, We are selling a 5-axis CNC woodworking machining center manufactured in 2019, equipped with a versatile FLEX5 cutting unit with a rotation range of 0-360° and a tilt angle of 0-90°. It is equipped with an 8-slot tool changer and a C-axis on the main spindle, which increases its accuracy and flexibility. It handles cross-sections from 20 x 50 mm to 200 x 455 mm and supports wood lengths up to 13,300 mm. Nsdpfoxalnwox Ad Njcl

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm Ncsdpsrc Ip Sefx Ad Nel weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Ncodpfex Uxdqjx Ad Njl Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions Nsdeuda Tnspfx Ad Njcl

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Ncodpfsvyli Esx Ad Nol Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, Ncedpfx Asx T Dhlod Nsl parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 1,000 mm, turning diameter: 90 mm, spindle motor power: 40,000 W, spindle speed (max.): 4,000 rpm, torque: 190 Nm, total height: 2,550 mm, total length: 4,325 mm, total width: 2,350 mm, bar diameter (max.): 90 mm, overall weight: 14,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main and sub spindle C-axis VDI 30 turret (Turret II) Drill breakage control High-pressure system Cooling unit Eco-Fluid coolant lubrication system Ncsdpfx Adex T A Dre Nsl KNOLL chip conveyor Irco Breuning short bar loader

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. Ncjdpfx Aoxbtqiod Nsl tool taper VDI 30 driven tools turning speeds 4.000 U/min travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Ncjdpfxjuqkttj Ad Nsl

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES Nedpfjx Tqkmjx Ad Necl FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: good (used), Year of construction: 2019, functionality: fully functional, >turning diameter 230/300 mm >turning length 452 mm >greatest pass round over bed 700 mm >control Fanuc >spindle passage 65 mm >spindle speed: 4500 U/min >spindle motor 15/11 kW Ncjdpfx Adeya Edge Nol >max. torque on the spindle 179 Nm >no. of tools in turret: 12 BMT 55 >driven stations: 12 BMT 55 >speed of driven tools 5000 U/min >drive milling spindle 5,6/3,7 kW >y-axis +/- 60 mm >sup spindle 7,4/4,9 kW >Spindlespeed subspindle 6000 U/min >rapid traverse 36/36/10 m/min >Subspindle >range L-W-H 3,9 x 1,65 x 2,0 mm >weight of the machine ca. 4,7 t >Main spindle chuck size: 210mm >Sub spindle chuck size 125mm >Automatic tool measuring- Q-setter >Chip conveyor >parts catcher with box >2 driven tools BMT 55 >set of standard tools CNC lathe with driven tools, Y-axis and sub spindle.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Main Motor Power: 12 kW Torque support: yes 4th axis - C-axis 5th axis - Aggregate interface Tool clamping system - HSK-F63 Tool changer positions - 14 Number of exchangeable units - 3 Vertical drilling spindles - 19 Ncsdpfx Asya Aimjd Nsl Horizontal X - 4 Horizontal Y - 2 Groove saw - 90° turnable Vacuum pump - yes Safety device - safety mat Control - Homag Power Control PC st Software - Homag Woodwop 5.0 Weight - 4,500 kg CE marking - yes Space required Length = 6580 Width = 4580 Two rows of stops Tool changing auxiliary device Workpiece support aids

Condition: good (used), Year of construction: 2011, Takisawa TMM 250 M3, year of manufacture 2011, Fanuc 160 is TB control, main spindle bar capacity up to 76 mm, sub spindle bar capacity up to 51 mm, 15-position turret, driven tools, C axis, sub spindle, max. turning length 1,230 mm, high-pressure coolant 8 bar, milling spindle B axis with Capto C6, 60-position Capto tool magazine, B axis swiveling +/- 115°, B axis clamping in 1° increments, B axis 7.5 kW / 8,000 rpm, Y axis +/- 130 mm. B axis overhaul in 2024 for €20,000. Nodpfx Aoyazwped Nocl

Condition: like new (used), Year of construction: 2008, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. Ncjdpoyaxmuefx Ad Nel * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD Ncjdpfx Adsx Th Nys Njl CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Ncsdpjx Thu Njfx Ad Nol Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: good (used), Year of construction: 2021, operating hours: 2,400 h, functionality: fully functional, 2-axis universal turning center with driven tools, C-axis, Y-axis, and sub-spindle Machine in extremely well-maintained condition Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axes Chip container Hydraulic hollow clamping cylinders, max. bar capacity Ø80 mm Nodsx Tg I Uspfx Ad Necl Sub-spindle A2-6" with ISM 52 spindle motor, power 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis travel ± 60 mm DMG MORI IoTconnector Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Workpiece catcher up to Ø80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loader (DMG MORI standard) Chip conveyor on right side 4-color signal tower Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Bore passage Ø78 mm (limits bar capacity to Ø78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Bore passage Ø66 mm Draw tube inner diameter Ø52 mm Sub-spindle options External chuck washing Pneumatic ejector with internal coolant supply Coolant / chip removal 12 bar high-pressure system with dual filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Manual tool probe MARPOSS General options Parts conveyor front left instead of parts bin Conveyor outside working area Chuck jaw options Set of soft jaws for BB-D 210 (3 pcs per set, 3 sets) Set of soft jaws for BB-D 250 (3 pcs per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle Alternating Spindle Speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Special equipment / accessories Hydrafeed MSV 80 with floor rails, bar feed magazine, and modifications Swarf bin (Model 350) VDI40 holders with multiple seats D1 (2 pcs) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pcs) VDI40X25X100 25Ø boring bar holder (1 pc) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Parting tool holder H=32 mm, VDI40, universal gearing (1 pc)

Condition: good (used), Year of construction: 2023, Spinner TC 600, year 2023, Fanuc 32 i TB control, X/Z travel 275/700 mm, chip conveyor, tailstock, 16-position turret, VDI 40, C-axis, driven tools, 3-jaw chuck Ø 250 mm. Nodsyap H Sopfx Ad Necl

Condition: good (used), Year of construction: 2008, Spinner TC 65, year of manufacture 2008, control Fanuc 21 iTB, travel X/Z 230/740 mm, tailstock, quill stroke 120 mm, spindle speed up to 4,500 rpm, 12-position turret, all stations driven, C axis, VDI 30, tailstock, three-jaw chuck, bar capacity up to 65 mm. Ncedeyapziepfx Ad Njl

Condition: good (used), Year of construction: 2005, Spinner Tc 65 MC, year of manufacture 2005, Fanuc control, X/Z travel 230/740 mm, 12-position turret, C axis, driven tools, tailstock, chip conveyor, parts catcher, postprocessor, tool measuring arm. Nsdpeyapitjfx Ad Njcl