Used Cnc Bend for sale (11,024)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Nlsdpfx Afoyzyh Djaoa Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t Nlodpsiau Uuefx Afaja

Condition: used, Year of construction: 1997, machine/vehicle number: 3104, Offer 25503 Technical specifications: - Manual operation + CNC-controlled operation - Max. working width: 1740 mm - Max. material thickness at 40 kg strength per mm²: 0.50 mm - Roller diameter: 90 mm - All 4 rollers are motor-driven - Working speed up to 10.5 m/min - Folding bearing - Pivoting control panel with CNC control Nodpfx Afoy E Ipksasla - Electric foot switch - Drive: 400 V / 0.75 kW - Required footprint (approx.): W 2000 x H 1250 x D 850 mm - Weight (approx.): 850 kg

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Njdpfxey Exdfe Afaela Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Nodsyx Ev Uspfx Afaola

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Nlodpfx Afoyx Euqeaja

Year of construction: 2012, condition: used, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1053, 2 CNC bending heads, bending capacity Ø 30 x 2 mm (steel), bending planes freely selectable within 138 mm total tool height, travel path X/Y/Z 1,416 x 260 x 1,170 mm, collet head with feed carriage, PLC control Siemens S7-300, touch display, infeed cycle conveyor, robot, make Motoman, robot controller, type SK16, Teach-In terminal MRC, punching station, make TOX, safety devices, safety fence systems, control cabinets, accessory cabinet with 8 drawers. Nledpsyx Etasfx Afasa

Year of construction: 2012, condition: used, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Nlsdpsyx Erisfx Afaja

Year of construction: 2014, condition: used, Make: ROSENBERGER UNISON, Type: RB Breeze50, Year of manufacture: 2014, Machine No.: M1322, CNC bending head, Bending capacity Ø 50 x 4 mm (steel), Any bending planes up to total tool height of 210 mm, Bending radius 125 mm, mandrel, L 3,000 mm, PLC control, touch display, safety devices, steel cabinet, double-door, internal/external tube deburring station. Nodpsyx Eq Eofx Afaola

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Nsdpfx Aovd Dftefaela Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm Nlsdpfx Aslbimaofasa • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Njdpjyr N Ersfx Afasla Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen Nljdpfx Afohmmfksaja - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Nlodpfx Afjylyh Doaoa Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Nsdpsg Avfkjfx Afaola -images similar-

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Nlodpfx Afjdzy Uujaea -images similar-

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Nlsdpfxjg Avgle Afasa

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Nlodpfjd Nxn Nex Afasa -images similar-

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD63CNC4A2SP, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 63 mm, bending angle (max.): 190 °, overall weight: 1,800 kg, total length: 4,000 mm, total width: 1,000 mm, total height: 1,300 mm, power: 18 kW (24.47 HP), input voltage: 380 V, type of input current: AC, number of digital displays: 1, warranty duration: 12 months, Equipment: emergency stop, foot remote control, Full-Automatic Single-Head CNC Bending Machine with Auxiliary Push Function Machine Model: BD63CNC4A2SP Machine Applications  Transportation Sector For municipal engineering, locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Nodpfx Afoyaz Egjasla Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification Model: BD63CNC4A2SP The Largest Applicable Carbon Steel, Copper, Aluminum Pipe or Profiles Φ63×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * The Largest Applicable Stainless Steel or High Alloy Steel Pipe, Profile Etc. Φ55×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * Maximum Reciprocating Feeding Pipe Φ63MM PROFILE AS PER MOLD DESIGN * Maximum Feeding Stokes (*) 3200MM Maximum Bending Radius (*) 550MM Maximum Bend Angle 190° Maximum Core Pulling Distance 3500MM Equipment Working Height 1300MM Pipe Bending Servo Power 7.0KW Pipe Bending Speed MAX. 150°/S ADJUSTABLE Bending Accuracy ±0.1° Feeding Servo Power 2.0KW Feeding Speed 200-1000MM/S ADJUSTABLE Feeding Accuracy ±0.1MM Rotation Servo Power 1.0KW Rotation Speed 180°/S ADJUSTABLE Rotation Accuracy ±0.1° Hydraulic Motor 7.5KW Hydraulic System Pressure 12 MPA Total Power 18 KW Equipment Size: Length * Width * Height 4000*1000*1300mm Equipment Weight 1800KG

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures. Nlodpfx Afjyak E Njaoa  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Nlodpfx Aonvfctjfasa

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Nljdpfx Aonvfc Eofaoa

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Nljdpfsxcx Atsx Afaoa

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Nlodpfoycwtfjx Afaja

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Nlsdpfjxpqy Djx Afaja Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition