Used Climatic Chamber for sale (5,777)

Condition: excellent (used), Vötsch VSKZ 04/120/S Ksdpeu Hghmjfx Afiodu Climatic test chamber -40°C to +120°C climatic chamber Climatic chamber Inside: Width 2.60 m Depth 2 meters Height 2 meters

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Kdedjxbd Raspfx Afieu Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Kedpfx Aoxhdthofiodu Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Ksdsvlpctopfx Afijdu Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled Hot Chamber: Temperature control range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: Temperature control range of the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Kdodpfoxpwdiex Afisu Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port ∅ 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A / R23 Weight: 1000 kg Important information for your security as a buyer! The following work is carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) Should you have further questions, we will be happy to answer them by phone.

Condition: used, Year of construction: 1988, Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press Kdsdpfx Aohvfznjfisu -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 panels -Hydraulic Cylinder: Stroke: 115mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Year of construction: 2023, condition: as good as new (ex-display), New machine warranty, stock item, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading trolleys available in stock (see picture). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 freely programmable programs, each with 40 segments - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h Kodpfxoxp Rpfe Afisdu - Exhaust volume: min. 390 m³/h - Additional equipment: Loading rails - Connected load: 39 kW - Net weight: 1150 kg - incl. documentation, CE declaration We are pleased to offer installation and commissioning services. Inspection by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating air oven, solvent oven, chamber dryer

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Kdjdpfsxp Rbhex Afieu

Year of construction: 2016, operating hours: 9,195 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Ksdpfxet Txtto Afisdu Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ Kodpfx Afjxn Rz Esiedu ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: excellent (used), Type: DST 1000 Description: For sale is a dust test chamber, type DST1000, from Testzentrum Baden GmbH. This unit was developed for conducting IP protection class “dust” tests (DIN EN 60529 / DIN 40050 Part 9). Testing possible with or without vacuum. Kdedjxpfx Ujpfx Afiju Operation / Features: - Control panel with display and buttons - Manual regulators for individual settings - Preset test routines for standardized testing Technical Data: - Test chamber volume: approx. 1,000 liters - Internal dimensions (W × D × H): approx. 1,000 × 1,000 × 1,000 mm - Overall dimensions (W × D × H): approx. 1,300 × 1,000 × 2,000 mm - Supply voltage: 400 V / 50 Hz, 3~N/PE - Current consumption: 10 A - Total electric power: max. 2 kW - Exhaust connection: DN100 flange Test Performance / Protection Classes: - Dust-protected IP5X - Dust-tight IP6X Weight: approx. 350 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Kjdpfxoxn Azde Afijdu

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording Kdsdpfjxp Rn Uox Afiou - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Ksdpfexn S Ugex Afijdu

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: Kdjdpfjt Txqrox Afisu R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, mileage: 210,000 km, Year of construction: 2011, Serial number: YV2J1E1C5BA71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21177 Specifications: EU approved until: 08.10.2025 Mileage: approx. 210,000 km Engine: 370 hp, Euro 5T Transmission: Fully automatic Suspension: Air – air Tires: In good condition Superstructure: 2011 Zoeller/SKK Ekopres P1453 Medium XL Autolift Roof bar with warning lights Indicators front and rear Exhaust outlet above cab Camera LED work lights Autoline sand spreaders 3 seats Air conditioning Description:1-chamber refuse compactor truck with pusher axle.Equipped with Autolift and sand spreaders.Handles waste bins up to 660 liters.Low mileage and good tires.Ready for delivery. Km: 210000 HK: 378 Kjdpfxow Sc N Do Afisdu Technical approved: no EU-approved until: 08.10.2025 Own weight: 16000 Total Weight: 27000 Payload: 10925 Width: 255 Length: 912 Euro: 5 Model: FM370 6x2 1-kammer komprimatorbil med Zoeller påbygg Gearbox: Automatic

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Kdsdoxnyqvjpfx Afieu Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Kedpfoxnx D Uex Afiodu

Year of construction: 2017, condition: reconditioned (used), overhauled, 12 months warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Entry rails for loading the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric flap can be retrofitted upon request. - Loading trolley available on request (see picture) - Documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. Kdedpfx Afjxp Rn Ijisu Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven.

Condition: excellent (used), Chamber in very good condition Binder climate chambers are used to test material behavior under constant humidity and temperature conditions. These devices operate within a temperature range from 0°C to 70°C and a humidity range from 10% to 80% relative humidity. The distinguishing feature of the Binder KBF series is absolutely reliable stability testing and precise maintenance of constant climate conditions. Accurate climatic control makes these chambers ideal for stability testing. The climate chamber is based on a modular design, and the interior is lined with stainless steel for easy cleaning. Thanks to the APT.line™ preheating technology, the circulation of air throughout the usable volume is smooth and even. Humidity levels can be precisely regulated and fully adapted to specific requirements. Kedpfxexnw Eqs Afisdu Key features: - Temperature range: 0°C to 70°C - Humidity range: 10% to 80% relative humidity - APT.line™ preheating chamber technology - Humidity control with a capacitive humidity sensor and steam humidification - Airtight inner doors made of safety glass (ESG) - Corrosion prevention on the glass with special TIMELESS coating - Interior chamber made entirely of stainless steel - 2 stainless steel wire shelves - 30 mm access port with silicone plug, left side - 4 robust castors, two with brakes, from 240 L capacity upwards

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Kdedpfet E Sfgox Afieu Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Kdsdpfxsxmhyco Afiou Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Year of construction: 2017, condition: reconditioned (used), overhauled, 12 months warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Entry rails for loading the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric flap can be retrofitted upon request. Kjdpfx Afsxp Rnujisdu - Loading trolley available on request (see picture) - Documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven.

Condition: excellent (used), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Unit: “Touch Panel” All control and operating commands can be triggered simply by touching the function symbols on the “Touch Panel” control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for uneven floors and to ensure sufficient ventilation of the machine section. Feed-Throughs The test chamber is fitted with feed-throughs on both the left and right sides. These allow measuring cables and test devices to be routed into the test chamber. Feed-throughs included in the basic configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Kodexmg Sdepfx Afiodu Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity spatially: ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Protection: 16 A slow-blow fuse, to be provided onsite Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data, information and specifications are subject to change and errors.) If you have any further questions, we will be happy to assist you by phone.

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Kdedpoxlzm Tjfx Afisu Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.