Used Chopper for sale (104)

Year of construction: 2007, condition: used, Mashing/lautering tun with side heating. The vessel was used in a distillery where 400 kg of malt grist was used to produce 15 hl of wort with 16.5°Plato. The lautering time was approx. 2 hours. Additional title: Heatable brewing vessel Inhalt: 3180 l Width: 1900 mm Height: 2550 mm Material: stainless steel 1.4301 Position: free standing Base construction: Cylindrical-conical vessel on pipe feet Features: Welded and ground insulating cladding, with operating platform, manhole in the hood, chopper with deflection gear and motor, spent grain chute, drop bottom, spent grain flap, shell heating surfaces, shell sight glass, temperature sensor Iiedpfxsw Tdyts Afish

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW Ijdpjim I Rujfx Afioih - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: new, functionality: fully functional, Mixaco mixer spare parts for CM 300, CM 600, CM 1000, CM 2000 etc. Other manufacturers or types on request. Iodsvxt A Ropfx Afioih Spare parts such as: bottom scraper, paddle, chopper... We have had experience with highly wear-resistant spare parts for over 30 years!

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 4,985 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 800 mm, A DEMO machine from our TOOL SHOP in Sofia, Bulgaria. Table length: 640 mm Table width: 540 mm Maximum workpiece dimensions: 810 x 700 x 215 mm Travel distances (X / Y / Z): 400 x 300 x 220 mm V-axis: 120 mm U-axis: 120 mm Maximum workpiece weight: 500 kg Control: M800 D-CUBES Wire diameter: 0.1 - 0.3 mm Machine weight: approx. 3.1 t Space requirement: approx. 2.8 x 2.1 x 2.1 m Machine construction: Hybrid design Machine includes: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection for XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole detection - Easy 3D setup for workpiece position detection - 5 controlled axes, prepared for additional axes - PFC – Precise Finish Circuit - H-FS – Fine finishing mode - LLS – Long Life System - 10 kg wire station Iijdsw Ni Tqspfx Afioh - 4-sided frame table, hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric Control M800 D-CUBES: - 19" full-touch monitor with gesture control - Hand pendant with configurable LCD display - Job planner including job interruption function

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Offered is a Treif Puma-CE pork chop chopper in good used and working condition. The unit runs on 380V, 16A, 3.4 kW, is made entirely of stainless steel, has a continuously variable speed, and has a large shaft. It was workshop tested. It was approved in 2008. Isdpfxev Tyz Ne Afijih Further information is available upon request. Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: new, Technical specifications: - Hopper opening 1850 x 1250 mm - Hopper volume approx. 3.0 m3 - Rotor diameter 500 mm - Rotor length 650 mm - Rotor speed 80 rpm - PLC control - Motor - gearbox 18.5 kW - Control cabinet (fully wired) including 5 m cable - Automatic star-delta start-up - Weight 3600 kg - Power depends on material Main applications and treatable materials: Iedpfjwb Sdqjx Afijih Recycling and volumetric reduction of non-ferrous metals Recycling and volumetric reduction of wood waste Recycling and volumetric reduction of plastics Recycling and volumetric reduction of electrical cables and coils Recycling and volumetric reduction of plastic containers and composite materials .

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Iedpjw Tbmdsfx Afisih Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ...

Condition: new, - 1 discharge power 5,5 (7,5) kW (PS) throughput approx. ……………. 800 kg/h electric outlet 400V 50Hz (3 phases) fuse 20 A dimensions: length 725 mm width 690 mm Iiodpob Nvr Isfx Afioh height 1 520 mm weight 70 kg material 1.4301 / AISI 304 discharge height 475 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23 03 28 / 1, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min Iiedpfjt Hvkvjx Afieh - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: good (used), Year of construction: 1986, working width: 500 mm, overall weight: 12,500 kg, machine/vehicle number: 017128, CASE IH 1660 axial flow Brand: Case IH Model: 1660 Year: 1987 Iedpfjvr Dxpox Afieih Operating hours: 3,300 h Cross-section width: 5.00 m Various types of equipment: straw chopper, straw spreader

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm Iisdpsb Hiylofx Afieh -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Condition: new, power 4,0 (5,45) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 880 mm width 735 mm height 1 540 mm weight 70 kg material varnished steel discharge height 450 mm suitable for branch diameter up to 50 mm Iedpfx Aeb Nvn Tsfioih

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete Iisdpovwlxhefx Afijh -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

Condition: new, power 11 (15) kW (PS) throughput approx. ……………..… 1500 kg/h electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: Iijdpfjb Nvtkjx Afioh length 810 mm width 725 mm height 1 570 mm weight 125 kg material 1.4301 / AISI 304 discharge height 495 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, -Manufacturer: Holac, cutter knife Iiedpfxovwlzio Afijh -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, power: 4 kW (5.44 HP), fuel type: electric, machine/vehicle number: 10038627 / 316200002G, Voran Muser steel version Isdpfstr Dx Sex Afieih New machine - Slight paint damage Subject to prior sale!

Condition: used, Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax=15A -Output: Pav= 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price per piece -Dimension: 210/50/H170 mm Iodpfxeh Rn U To Afijih -Weight: 1.1 kg/pc.

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available Isdpfsq Untrsx Afisih -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW100-005 -Item no.: 826 269 1. -Power: R=100ohm P=500W Iisdpfx Ajnch Ixofioh -Dimensions: 255/160/H60 mm -Weight: 1.1 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 Iedpsvwll Iofx Afieih -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, Kuttermesser -Type: R350 5 220V 0.R 230 92 Iiedpfx Afevwlvaoish -Quantity: 1x knife. available -Dimensions: 390/230/H20 mm -Weight: 1.7 kg

Condition: used, Brake module, brake unit, brake chopper Iedpfx Afob A Sfaeisih -Manufacturer: Lenze, brake module type EMB8252-E -Input: DC 725V Imax=2.7A -Output: Pav= 70W Ppk = 2kW -Number: 6x converters available -Price per piece -Dimension: 210/50/H170 mm -Weight: 1.4 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 1 set / 3 pieces Iiedjvwlk Dopfx Afish -Type: R320.5-09971 -Quantity: 2 sets of 3 available -Price: per set -Dimensions: 330/300/H70 mm -Total weight: 4.7 kg

Condition: used, Brake module, brake unit, brake chopper Ijdeltrfiopfx Afieih -Manufacturer: Lenze, brake module type EMB6032-G -Input: G 325V DC -Output: G 375V DC 8.0A -Number: 2x module available -Price per piece -Dimension: 215/150/H90 mm -Weight: 0.4 kg/pc.

Condition: used, DC brake, braking device, electric motor brake, brake module, brake unit, brake chopper -Manufacturer: HuK Hilger u. Kern, Statomat brake device frenotron-se unused in original packaging -Motor power: max. 3.5 kW Ijdpsqrwxdsfx Afioih -Techn. Data: see photo -Quantity: 2x power supply available -Price per piece -Dimensions: 100/70/H110 mm -Weight: 0.4 kg