Used Chopper for sale (111)

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Guedpfx Aoyt Iawok Ujg Machine is without gearbox.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Guodevvi Anepfx Ak Ueg Storage location: Supplier

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Godpoy D E Tdofx Ak Usug

Condition: new, Year of construction: 2026, functionality: fully functional, construction height: 1,207 mm, construction width: 420 mm, number of blades: 30, rotor diameter: 180 mm, rotor length: 300 mm, Equipment: CE marking, Slow-running mill for storage Gusdpfxeyzrfus Ak Ueg Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Gsdpfx Akjzu A Haj Uoug Storage location: Supplier

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Gsdpfx Aezuwu Eok Ueug Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Number of axles: 2 Number of fixed blades: 18 Screen perforation: 20 mm MACHINE DETAILS Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1442, power: 37 kW (50.31 HP), filling opening length: 1,300 mm, filling opening width: 1,350 mm, rotational speed (max.): 1,480 rpm, rotor width: 1,000 mm, TECHNICAL DETAILS Rotational speed: 1,480 rpm Opening width: 1,050 mm Opening length: 1,300 mm Rotor width: 1,000 mm Screen perforation: 20 mm Number of rotating knives: 26 pcs. Number of fixed knives: 36 pcs. MACHINE DETAILS Main motor power: 37 kW Power of hydraulic unit: 2.2 kW Oil tank capacity: 125 l Stroke of hydraulic cylinder: 1,000 mm Dimensions & Weight Gsdpfxjzuwthj Ak Ujug Dimensions (L x W x H): 4,100 x 1,800 x 3,0520 mm Weight: 5,000 kg Transport packages: 1 pc. EQUIPMENT Hydraulic cylinder

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes. Gujdeztxy Tepfx Ak Ujg

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Gedpfx Aoy Hi D Sek Ujug Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Max. feed width: 320 mm Max. feed height: 80 mm Gujdpfx Aexc H Rljk Uog With conveyor belt

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Guedpfxeynzg Hj Ak Uog Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: good (used), Year of construction: 2017, operating hours: 12,000 h, Single-shaft shredder with pusher floor Guodpfezbzuwex Ak Ujg Rotor diameter: 500 mm Rotor width: 1300 mm 87 knives on the rotor Knife size: 40 x 40 mm Motor: 75 kW with hydraulic pusher floor: 7.5 kW Screen with 20 mm and 30 mm openings Hopper capacity: 14 cubic meters with discharge conveyor belt, approx. 3 m long Total weight: approx. 10 tons

Condition: ready for operation (used), functionality: fully functional, loading space width: 1,400 mm, loading space length: 2,900 mm, total length: 6,600 mm, total width: 2,150 mm, total height: 2,550 mm, TECHNICAL DETAILS Loading area length: 2,900 mm Loading area width: 1,400 mm Cutting shaft: 1 MACHINE DETAILS Total installed power: 48 kW Cutting shaft motor power: 37 kW Dimensions (L x W x H): 6,600 x 2,150 x 2,550 mm Guodpfx Akoxw U Hqe Ueg

Year of construction: 2010, condition: good (used), functionality: unexamined, For sale: straw shredding line. The line consists of: - horizontal feeder, Gedpfx Akewttp So Usug - inclined feeder, - chopper with housing, - individual bag filter. Line capacity: approx. 5 t/h Length of horizontal feed table: 7.6 m Drive motor power of horizontal feed table: 1.5 kW Length of inclined feed table: 12.5 m Drive motor power of inclined feed table: 1.5 kW Shredder dimensions: Height: 8.2 m Length: 5.2 m Width: 3.8 m Power: 2 x 132 kW Each shredder is equipped with an individual bag filter. For more photos and details, please contact us. Machines can be viewed in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Year of construction: 2010, Heavy-duty shredder with large rotor Low operating hours Used, excellent condition, low usage Manufacturer: DHB-Maschinenbau Type 800 Year of manufacture: 2010 Operating hours: 2108 Machine number: 30123 CE type-approved Motor: 30 + 2.2 kW Slow-speed With hydraulic push floor Hopper opening: 800 mm x 1000/1300 mm / 1.25 m³ Cutting width: 800 mm Rotor size: 800 x 400 mm diameter Guedpjxddukjfx Ak Usg Vibration dampers Number of blades: 46 concave pieces Screen hole size: 15/20 mm New price approx. €45,000 Extraction connection D 200 mm Required space approx. 2700 mm x 1600 mm x 1900 mm Weight approx. 3400 kg Total connected load approx. 32.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in current condition No warranty or guarantee

Condition: good (used), Year of construction: 2021, Rotor 264 mm Feed opening approx. 510 x 815 mm Rotor length approx. 510 mm Motor 15 kW Knives 24 Screen 15 / 20 mm (can be exchanged) Technical specifications on request Guedpfx Akoyf D Ris Uog

Condition: used, Year of construction: 1995, with new perforated screen used Brand: RSN Model: SL 400 Year of manufacture: 1995 CE type certified GS wood dust tested Motor: 18.5 kW Slow-running with hydraulic moving floor Hopper opening: 800 mm x 1000 mm Rotor width: 800 mm x 250 mm Vibration damper Number of knives: 18 pcs Screen hole diameter: 20 mm Original price approx. €27,000.00 Extraction connection: D 180 mm Space requirement approx. 1900 mm x 1300 mm x 1620 mm / plus platform Weight approx. 1500 kg Total connected load approx. 19.5 kW Guodpow U Emksfx Ak Usg Storage location: 97447 Gerolzhofen, free loaded, unpacked Transfer in current condition as inspected without guarantee or warranty

Condition: used, Industrial shredder chopper Gjdpfx Akoymaiqe Ujug This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: good (used), functionality: fully functional, We are selling a mobile auger chipper type HP50 from the manufacturer Sasmo/Laimet. It is powered by an 8-cylinder Scania diesel engine. The machine has a tracked chassis. The chipper can chip trunks up to a diameter of 60 cm. Gedpfx Ast Id Ixsk Usug

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 19632, Eldan Super Chopper SC1412T Gjdpfx Asl Tn Uiek Ujug for tyres, cable, wood, plastic or waste Hägglunds NB 400 S N 02 12 heavy duty frame vibrating extractor hopper cabinet very clean machine

Condition: good (used), 1 x Alpina 330 Bowl Cutter 330 litres Gedpfoytgwzsx Ak Ueug with loader and emptier

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, For PTO drive (200-450 hp). Equipped with a loading crane and a telescopic tipper body (hopper, 25 m³). Gedpszz Ryuefx Ak Ujug

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc Guodpfx Ajvn D I Nsk Uog +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Equipment: Air conditioning, straw chopper, cutterbar carriage, hillside compensation, onboard computer/monitor, throughput control, yield measurement, reel horizontal adjustment, hydrostatic drive, reversing device, cutterbar, loss measurement Shaker with JD625R cutterbar with a working width of 7.60m, transport trailer, and rape seed table Guodpfxsil Hade Ak Ujg ENGINE IS MAKING NOISE.

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Guodpfxjbxu Dho Ak Ueg Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale