Used Chamfer for sale (362)

Condition: used, overall weight: 58,000 kg, maximum load weight: 45,830 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, Year of construction: 2024, Equipment: ABS, You can find our complete inventory of immediately and soon available vehicles on our website. Below is a selection of features. Complete specifications available upon request. Gooseneck * Designed in SNT format to optimize loading platform length * Length approx. 4,100 mm, front with chamfered corners approx. 400 x 400 mm * Rear chamfer approx. 1,000 mm x 10° * Steel front wall, removable, approx. 400 mm high * Plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized finish * 2 pairs of lashing rings (LC 16,000 daN) integrated inside on the outer beams of the gooseneck, rotated approx. 45° * 1 pair of lashing rings (LC 10,000 daN) integrated inside at the front of the gooseneck outer beams, rotated approx. 45° * 2 pairs of stake pockets integrated in the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 2 pairs of lashing rings with retaining spring, suspended on the outer beams of the gooseneck (LC 5,000 daN) * 1 pair of plug-in aluminum side boards on the gooseneck, approx. 1,200 mm long, approx. 400 mm high, anodized finish * 3.5-inch kingpin Loading Platform * Telescopable loading platform, length approx. 9,300 mm, with rear chamfer approx. 500 mm x 10° * Recess in the chamfer and extending into the platform for excavator stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the platform and interrupted between axles (increases friction coefficient) * Platform locked with conically welded locking profiles every approx. 250 mm * Including pre-tension plate * 1 pair of recessed horizontal lashing rings in the fixed front part of the platform (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN) Itedpfx Afsxc Ax Eeisn * 5 pairs of stake pockets integrated in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the fixed support of the platform, for plug-in stakes approx. 100 x 50 mm * Wheel wells with square climbing strips approx. 15 x 15 mm * Wheel wells in front of the axles continuously open up to the cross member of the gooseneck, approx. 1,310 x 700 x 410 mm (L x W x D) * Wheel wells between the 2nd and 3rd axle approx. 1,310 x 700 x 250 mm (L x W x D) * Aluminum covers for the wheel wells, which can also be used as bridge elements for the extension OR as widening planks * In front of and behind the rear wheel well, 1 pair of horizontal lashing rings each (LC 10,000 daN) in the outer frame of the platform * WADER container pockets in the platform and gooseneck for transporting 2x 20' containers * 1x over gooseneck with long goods rack * 1x in the platform * Extension (galvanized) extendable by approx. 230 mm per side * Loose widening planks, steel reinforced * 4 pairs of plug-in WADER container locks * Long goods rack in the lowbed, level with gooseneck, required for transporting 2x 20' containers * 1 pair of aluminum loading ramps VFR 120, approx. 2,400 x 620 x 120 mm (L x W x H) Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd and 4th axle friction-steered with electromagnetically activated reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF dual tires * 1st axle with automatic lift axle function Braking System WABCO EBS-E according to EU regulations Landing Legs * Me

Condition: reconditioned (used), Year of construction: 2017, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT MODEL:AMBITION 1650 FC Machine completely regenerated New dice , new rollers , regenerated aggregates , set of new tools glue pot regenerated and much more SUMMARY,EQUIPMENT: GLUING AGGREGATE 2 X 2,2 KW 200 HZ GLUING UNIT A12 CUTTING UNIT TRANSVERSE CHAMFER/STRAIGHT 2 X 0.35 KW MILLING UNIT 2 X 0.55 KW COUNTER-ROTATING FORMING UNIT 2 X 0,35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS FREE SPACE GLUE JOINT SCRAPER POLISHER - Feed speed ¦ 8 - 18 m/min - Max. feed rate with shaping knife ¦ 11 m/min - Max. feed rate with shaping knife Ijdpfxephnzao Afistn In conjunction with VKNR 4839 ¦ 14 m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 5,760 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Iodsw T Sl Dopfx Afiotn Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: used, OTT Pacific V12 - Edgebanding SPS-compatible control with LCD display Pre-milling unit with plunge control Fully automatic roll magazine / crosscut shear High-speed gluing station Automatic pressure unit Pneumatic trimming 0-10° Flush milling/chamfer milling 15/30/45° - 8 mm Radius milling R-2, R-5 Corner rounding Iedpfx Aow Nqg Ejfietn Radius scraper Surface scraper - will be converted to Schwabbel unit Soundproof cabin with central extraction Machine is WORKSHOP OVERHAULED in VERY GOOD CONDITION Available from stock Lieboch

Condition: good (used), Year of construction: 2001, functionality: fully functional, On offer: A used edge banding machine Manufacturer: Brandt (Optimat series, later Homag Group) Type: KD 68 CF Machine type: Edge banding machine Year of manufacture: 2001 Weight: approx. 2,000 kg Ijdpfx Afjxb E D Ioistn Workpiece data: Workpiece thickness: up to approx. 50 mm Minimum workpiece width: approx. 60 mm Minimum workpiece length: approx. 160 mm Edge thickness: 0.4 – 3 mm (PVC/ABS/coil material) Strip/solid wood edges: up to approx. 9 mm possible Feed speed: approx. 12 – 18 m/min (adjustable, model dependent) Units and equipment: Pre-milling unit for edge processing prior to glue application Glue application station with hot-melt adhesive tank Guillotine for edge material up to 3 mm Pressure station with 3 rollers Milling units (radius/chamfer) Corner rounding unit Scraper unit for removing glue residue Polishing unit for finished edges Electrical data: Total connected load approx. 10 – 12 kW Extraction ports: multiple connections Ø 120 mm Voltage: 400 V / 50 Hz / 3 phases

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Isdpow Tfw Hofx Afistn Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,410 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Iedpfxsxc Axro Afiotn Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear Iedpfx Afsw Itmreijtn The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Ijdsrq Ebfopfx Afiotn Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display Isdpfowtz T Sox Afistn pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) Iedpeu N D Ipofx Afietn *

Condition: used, Year of construction: 2020, Numerical Control with Sintra Software Panel height 60 mm Solid wood 8 mm PVC/ABS 0.4 - 3 mm Feed speed 12 m/min Adjustable infeed guide Side roller conveyor with idle wheels for panel support Precision unit Reel holder plate Gluing unit for EVA hotmelt glue and glue pot End trimming unit with 2 motors Chamfering unit with 2 tilting motors Multifunctional rounding unit with 2 motors (cornering unit + rounding unit) Edge scraping unit Brush unit TECHNICAL DETAILS TO BE VERIFIED Isdpfew Ew Ddjx Afistn

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder Iodsgtx Aqspfx Afistn edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk Itedpew Itmlefx Afisn – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of Ijdpsxayvpsfx Afijtn - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: used, OTT Tornado - TOP Control - via a 15-inch color touchscreen monitor for full automation and maximum ease of use CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules Joining unit for joining chipboard Automatic roller magazine Automatic edge magazine Double end mill with automatic tilting 0° / 3° Flush milling unit - for flush milling - 12mm Fine milling RADIUS - radius milling - profile knives R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius - chamfer Surface scraper unit Lubricant spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tooling included Machine is in EXTREMELY MINT CONDITION WELL-MAINTENANCE First commissioned in 2011, very few operating hours, approximately 1200 Machine from lease / leasing option Itsdpfxswcymcj Afien from Lieboch warehouse

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Iedpew Sbblofx Afietn Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Itjdpfx Ajwwtpysfien

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Iedpfx Afsw R Sypsistn Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear Itedpow Itl Ujfx Afien The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Ijdpfx Afew R E Hpsietn Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: used, OTT Atlantic SPS-based control system High-speed gluing unit Automatic roll and edge magazine Automated swivelling flush-trimming unit Flush milling Chamfering and radius milling Scraper unit Finish buffing unit All units are controlled via SPS from the operator panel Soundproof enclosure with integrated central extraction The machine is WORKSHOP-TESTED and FULLY FUNCTIONAL Ex stock Lieboch, net €3,000.00 Itsdpfow Np Dpjx Afion

Condition: used, Year of construction: 2013, Touch Panel Control Panel height 60 mm Solid 15 mm Pvc/Abs 3 mm Variable feed speed Working height electronically adjustable by C.N. Adjustable panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive unit 2-motor rectifier unit Lamps for heating the edge of the panel Roll holder plate Gluing unit for EVA hot melt glue Gluing unit with AFS (Air Force System) Edge pressure unit on straight profiles with adjustable pressure rollers End trimming unit with 2 motors Chamfering unit with 2 tilting motors Multifunctional 2-motor rounding unit (cornering unit + rounder) Edge scraper unit Glue scraper unit Brush unit Itodpfx Afswwkyisisn

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit Iedpfou Tyx Ajx Afietn End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Itedsw Db Rfopfx Afion