Hydr. pressbrake

ERMAK POWER BEND PRO 4.220

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck Ledpfx Adov Epigs Njhb 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: excellent (used), Year of construction: 2000, pressure 105 t chamfer lenght 3100 mm distance between columns 2600 mm table width 100 mm table height 750 mm Control DELEM DA 65 dayligth 200 mm working feed 0 - 10 mm/sec return speed 0-100 mm/sec rapid traverse - up max. 100 mm/sec voltage 380 V / 50 Hz Ledovq R Uuspfx Ad Nehb total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • controlled backgauge 2 axis • upper and lower tool • 2 hand control / foot switch

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm Lhsdpfx Asg Eubnod Nsb - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: good (used), functionality: fully functional, Year of construction: 1995, working width: 4,100 mm, throat depth: 250 mm, overall weight: 20,000 kg, pressing force: 200 t, Hämmerle BM200-4100. The machine was dismantled at the old plant in 2023, but it was not reassembled or put into operation at the new site. Since then, the machine has been kept in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. Lodpfjwa S Dnex Ad Nohb All data can be found in the pictures... No tools are included, as these were compatible with the new machine.

Condition: used, Year of construction: 2008, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, AMADA HFE2204 Pressbrake Ljdpfx Adow I Dmcs Njhb Pressforce: 220t Bending length: 4m Backuage: 4-axis backgauge system Clamping system: Amada

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Lhsdjxqyxlopfx Ad Nob Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Lhsdpfxjuhf Tzs Ad Njb Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: good (used), Year of construction: 1991, Pressing force 1500 kN Working width 3100 mm Stroke 200 mm Motor 11 kW Lodpfx Ajvy Hd Rjd Njhb Dimensions LxWxH: 2100 x 2000 x 2800 mm Weight 9,600 kg Incl. tools, see PDF

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 Lsdpsw Dnd Ssfx Ad Njhb - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA Lhjdevncfmepfx Ad Nob - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg