Used Chamfer for sale (362)

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed Itodpfx Afjr I E Exoion The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: ready for operation (used), Year of construction: 1999, SCM Edge Banding Machine OLIMPIC S 220 - Manually adjustable infeed fence - Jointing unit - End trimming unit - Flush trimming unit - Chamfer trimming unit - Automatic feed Itodor A Eumepfx Afion - Corner copying unit with 4 motors - Radius scraper knives - Flat scraper knife - Buffing unit - Hot air blower - Machine length: 7.50 m

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm Isdpju Icc Aefx Afistn work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Itedpfx Asxly I Aefijn Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: good (used), Year of construction: 2025, • Additional interchangeable glue pot • PLC control (incl. touchscreen) • Hotmelt application onto the workpiece up to 3 mm jointing cutter Ijdpfx Asxgfpzefistn • Jointing cutter (incl. DIA tool) up to 2 mm cutting depth • Maintenance-free glue pot with quick-change function, incl. glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter heads (combination execution) • Corner rounding unit • Surface scraper (incl. pneumatic lift) • Free position (for cleaning station or radius scraper) • Robust chain feed • Ball bearing mounted double pressure rollers (top pressure) • Inspection window on rear of machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock F4/09 radius scraper (incl. pneumatic lift) • Hebrock pneumatic 3-point adjustment (for radius, chamfer, or flush milling) Available from: immediately Delivery terms: ex works – EXW Berlin Payment terms: Payment before collection Accessories supplied without guarantee. The following applies: "Item sold as seen." The buyer is responsible for inspecting the completeness of the item on site.

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors Iodpfx Afsxggmboiotn SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm - DELEM CNC control DA69 - controlled axes: Y1 + Y2 + X + R + Z1 + Z2 - hydr. bombing device - Electric back stop, travel range 600 mm - hydr. Upper tool holder standard R - hydr. Lower tool holder standard R Iedpfx Ajuiz I Djfijtn - front laser protection device FIESSLER - 2x CNC electrically movable stop fingers, foldable - side + rear protection device - 1x set of upper tools - Hand and foot controls - Operation manual

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm Isdpfx Aoxf Na Uofiotn 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. Iodpfswkf Ihsx Afijtn - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, Iedpewugpbofx Afistn the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Itodpfxoxfw A Ro Afijn Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Year of construction: 2005, condition: excellent (used), chamfers PVC edges and others pneumatic pressure power supply 380V Iodjidmvnepfx Afietn perfect condition

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced Itodpfok Uqhaex Afijn - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Itedjwazn Ajpfx Afisn Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: Iodpfx Afoxhat Deijtn - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Iedpjvnwf Usfx Afistn Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements depth 7300 mm Isdexfct Iepfx Afiotn Additional Equipment Glue pot granules including 2 glue pots for PUR Jointing unit Spraying device Crosscut saw unit Flush, radius, and chamfer capability Corner copying Scrapers Buffing unit This OTT Twister edgebander was manufactured in 2009. It features a panel thickness capacity up to 60 mm and a feed rate of 20 m/min. Equipped with multiple units including jointing, crosscut saw, and corner copying, it also offers flush, radius, and chamfer capabilities. Ideal for efficient edge banding operations. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW HOOK-UP CONTAINER, SQUARE TANK WITHOUT INTERNAL CHAMFERING, REAR OPENING WITH TWO FOLDING DOORS WITH 200 MM BEAMS AND 0.60 MT CIO FLOOR, LARGER WHEELS AND REINFORCEMENT IN THE CENTRAL EXTERNAL PART OF THE CENTERLINE PLUS REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT REF: 24-N-21 TYPE: for aggregates C NEW: yes LID: no OPENING: rear with two folding doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m + 0.20 m INTERIOR / EXTERIOR WIDTH OF THE BODY: 2.35 m / 2.55 mt INTERIOR / EXTERIOR FRONT TAILGATE: 1.50 mt / 1.70 mt INTERIOR / EXTERIOR REAR TAILGATE: 1.00 mt / 1.20 INTERIOR / EXTERIOR SIDE TAILGATE: 0.80 mt / 1.00 mt MC: 12 WEIGHT: 2220 Isdpjw Szahjfx Afietn BOTTOM: 5 mm WALL: 4 mm COLOR: green ral 6029The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specializing in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable Ijdpfjppgcrox Afiotn machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP Itjdpexhatqefx Afien - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm - DELEM CNC control DA69 - controlled axes: Y1 + Y2 + X + R + Z1 + Z2 - hydr. bombing device - Electric back stop, travel range 600 mm - hydr. Upper tool holder standard R Itodot I D U Eopfx Afion - hydr. Lower tool holder standard R - front laser protection device FIESSLER - 2x CNC electrically movable stop fingers, foldable - side + rear protection device - 1x set of upper tools - Hand and foot controls - Operation manual

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, overall weight: 18,000 kg, first registration: 03/2022, next inspection (TÜV): 09/2026, emission class: euro6, color: red, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Itodjxhargjpfx Afijn Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm Itsdjppgcyspfx Afijn - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) Itodpfexharysx Afion - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 2010, pressure 220 t chamfer lenght 3720 mm distance between columns 3020 mm column arm 400 mm ajustment speed 125 mm/sec working feed 10.0 mm/sec return speed 132 mm/sec back stop - adjustable 800 mm stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. total power requirement 18.5 kW weight of the machine ca. 12800 kg. range L-W-H 5850 x 2220 x 2820 mm Good condition Current new price approx. 100.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality color LCD screen (TFT) - Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + crowning - CNC electric motor-driven backgauge (X axis) - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor-driven bending table crowning - 2x manually adjustable stop fingers - AMADA/PROMECAM upper tool holder - 1x reversible MULTI-V die block - 2x front sliding support arms (“sliding” system) - Side guard * Swivel doors + FIESSLER laser safety device - Rear safety device (light barrier) - 1x freely movable foot control Iodpfx Aexfwc Djfistn - Original operating instructions * Special accessories included in delivery: - 1x NEW complete upper tool set - split (currently not installed) * ROLLERI PS.135.85.R08 * Height 135 mm / 85 degrees / R 0.8 mm