Used Altendorf F 45 Elmo 3 for sale (129)

Condition: good (used), Year of construction: 1993, Functionality: fully functional, Altendorf sliding table saw Type: F 45 Elmo Year of construction: 1993 sliding carriage length 3200 mm Cutting width 1350 mm With duplex fence With Digit L digital display on the angle stop With Digit X digital display on width stop With scoring unit Main saw motor 5.5 kW Scoring motor 0.75 kW Control panel above the machine Electric lifting/lowering/swiveling of the saw blade Table extension and table widening Maximum saw blade diameter 350 mm with scoring unit Max. saw blade diameter 400 mm without scorer Maximum cutting height at 90° 130 mm Maximum cutting height at 45° 90 mm Saw shaft speed 3000/4000/5000/6000 rpm Beizi8A Weight approx. 1100 kg

Condition: excellent (used), Year of construction: 2017, Operating hours: 266 h, Machine/vehicle number: 17-07-12-050, Cutting width (max.): 1,300 mm, Cutting height (max.): 154 mm, Saw blade diameter: 450 mm, Cutting width at rip fence: 1,300 mm, Equipment: Scorer, F 45 sliding table saw with ElmoDrive control, swivel control panel at eye level, max. saw blade diameter D = 450 mm, max. cutting height 154 mm, Npy2Ufc3 Double roller carriage 3,400 mm, max. cutting length 3,305 mm, Table top extension 2,000 mm, CNC parallel fence with 1,300 mm cutting width, Angular mitre fence with DIGIT LD, 2-axis scoring unit Motor 5.5 kW (7.5 hp) with 3 speeds (3,000/4,000/5,000 rpm), ex location Seevetal, without transportation, as seen, subject to prior sale

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Machine/vehicle number: 18-02-12-033, Altendorf F45 ElmoDrive sliding table saw 2018 special machine For sale is a used sliding table saw Manufacturer: Altendorf (DE) Model: F45 Elmo Drive C0Ogcxovee Year of construction: 2018 Main engine 7,5kW Equipment: -ElmoDrive control unit -7.5KW VARIO drive -Trolley with floor supports -TIP-SERVO-DRIVE -CNC stop 1300mm reinforced version -air cushion table -spraying device The machine is equipped to cut both wooden and metal panels!

Year of construction: 2022, Condition: used, Used machine Year of construction 2022 Basic equipment - Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height when swiveling the saw unit - Control at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection max. 150 mm, max. saw blade Ø 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3/4/5000 rpm) - AKE tool clamping system for the Uthc0Pw0Gz main saw blade - Working height 91 cm - CNC parallel fence 1000 mm - Angular mitre fence - On/off switch on the double roller carriage - 2-axis scoring unit one-sided tilting - LED lighting Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 1996, Format saw Altendorf F45 Serial no. 96-1-139 Year of construction 1996 Roller table 3200mm E2Pq2Aq Tiltable 45 degrees Main motor 5,5kW Max saw blade diameter 350mm 400V *No pre-zipper

Condition: excellent (used), CIRCULAR SAW model ALTENDORF F45 with 2 axes by CNC second hand machine in Excellent working conditions CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control electric movements of scoring unit , from the control panel technical data : anodized aluminum carriage mm. 3000 max.diam. blade ( with scoring blade ) mm.350 max.diam. blade ( without scoring blade ) mm. 450 blade rotation speed g/min.3000/4000/5000/6000 with scoring unit : Yes blade group inclinable at 45° cutting width on the parallel guide mm.1350 main saw blade . motor power 7.5 Hp scoring unit motor power Hp 1 Bwskxebl9E machine equipment: aluminum telescopic rod n.01 DIGIT L digital display n.01 mechanical stop n.01 DUPLEX register suspended "bridge" protection on the blade n.02 additional aluminum frames (rear and side) net weight kgs. 1000 volt. 380/50

Condition: as good as new (ex-display), with 7? touchscreen - display machine - Bxk7Tcw9H new display machine

Condition: excellent (used), Year of construction: 2015, Undercutter table length 3.2m Bogrg98Xcf0 Motor 5.5 kw

Condition: excellent (used), F 45 3200 mm in well-maintained condition from a small Swiss company 10 HP engine Hydr lift swivel Cutting width 950 mm Bwq2Hgu29G

Condition: used, Year of construction: 2000, No. 04431 Sliding table saw Altendorf F 45 POSIT / c.a.t.s. Used, year of construction 2000 Sliding carriage 3000 mm Positioning control POSIT / c.a.t.s Main motor 5,5 kW Vario Infinitely variable speed 2500 - 6000 rpm Saw blade Ø max. 450 mm Maximum cutting height 150 mm Cutting height and cutting angle electronically controlled RAPIDO scoring unit 0.75 kW, 2-axis controlled Bvhnawngcg Cutting width 800 mm, electronically controlled Length stop with 2 stops, electronically controlled Parallelogram protective hood with 80 mm suction connection Suction connection under table 120 mm Transport dimensions approx. 3200 x 1900 x 1900 mm LWH Weight 1100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, Engine power 5.5 kW (7.5 hp) Speed: 3/4/5/6000 rpm. Saw blade diameter max. 450 mm, cutting height max. 150 mm, at 45° max. 90 mm Cutting width 1000 mm with digital display Height adjustment hydraulic by foot pedal Swivel angle adjustment hydraulically by foot pedal 0 - 45°. Angle stop, cutting to length up to 3200 mm Two suction nozzles, top 80 mm, bottom 120 mm Machine weight approx. 1200 kg working table height 910 mm Zq7Ayc2Pp Cutting length 2800 mm

Condition: good (used), Year of construction: 1990, Cutting width (max.): 1,000 mm, Cutting height (max.): 140 mm, Table length: 1,400 mm, Power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Sci77Fxith

Condition: good (used), Year of construction: 1995, From liquidation: Altendorf F 45 Year of construction 1995 Scorer Digit X Digit L --without function Bohsmwtopkc Saw blade 350mm Motor brake scorer electr. adjustable hydr. by foot control saw blade adjustable in height and miter Digital speed display 3/4/5/6000 rpm Main motor 5,5KW Sliding table length 2800mm Table extension Cutting width to the right of the saw blade 1200mm

Year of construction: 2022, Condition: new, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively Dj0L7L into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Year of construction: 1980, Condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm Q7Xqj 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject

Condition: excellent (used), Year of construction: 2019, F45 ProDrive Machine height 91 cm Operation at eye level Saw blade diameter 450 mm Motor 5.5 kW VARIO 3-axis pre-seater with parking position LED lighting/ pre-seater Double roller carriage 3000 mmOn/off switch on double roller carriage Table top extension 840 mm Angle mitre fence Dmx7Ep Extendable cross slide extension CNC rip fence 1000 mm Front support roller DUPLEX - second-hand - on request Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, Machine/vehicle number: 24-01-12-041, with 7" touchscreen and separate keyboard Machine height 910 mm, Operation at eye level with template holder, 2-axis scoring unit and extended cutting height, max. saw blade diameter D = 500 mm, max. saw blade projection 179 mm, Vario motor 7.5 kW (10 HP), LED lighting scoring unit, Table top extension 840 mm, Double roller carriage 3000 mm, max. cutting length with scoring unit 2905 mm, On/off switch on the double roller carriage, Angle mitre fence, CNC parallel fence, cutting width 1000 mm, template holder, Front support roller, STEG, second support on the double roller carriage, Oioot DUPLEX, double-sided mitre fence, incl. pre-freight and packaging. List price of the machine € 38,300.00 + VAT. Available immediately from stock Seevetal, subject to prior sale, without freight, assembly and instruction

Condition: excellent (used), CATALOG NO. 7015 TECHNICAL DATA - max diameter of the main blade with scoring tool 350mm - max cutting height 100mm - main dial adjustable up/down - spindle diameter 30mm - spindle locking Djflet - with a format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with a sidecar - with undercutter - max diameter of the scorer 100mm - spindle diameter 22mm - scoring machine motor 0.75 kW - main engine 5.5 kW - 4 types of rotation speed 3000, 4000, 5000, 6000, rpm - diameter of the exhaust connection 120mm, 60mm - tabletop dimensions 1220x730mm - table top size with extension 1220x1150mm - shield cover - dimensions L/W/H 2880x2800x1100mm, - weight 961kg – German production – unpainted - saw used, very good condition Net price: PLN 15900 Net price: EUR 3573 Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, CATALOG NO. 7075 TECHNICAL DATA - max diameter of the main blade with scoring tool 350mm - max cutting height 100mm - main dial adjustable up/down - spindle diameter 30mm - spindle locking - with a format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1250mm - with a sidecar - with undercutter - max diameter of the undercutter 120mm - spindle diameter 22mm Bawkhp8Piyy - scoring machine motor 0.75 kW - main engine 4kW - 4 types of rotation speed 3000, 4000, 5000, 6000, rpm - diameter of the exhaust connection 140mm - tabletop dimensions 1220x730mm - shield cover - dimensions length/width/height 2920x3200x1000mm - weight 727 kg Net price: PLN 12500 Net price: EUR 2809 depending on the price of EUR 4.45 (Prices may change with higher volatility)

Condition: used, Year of construction: 1995, Machine has a 4-axis control plus 2-axis scorer Programmable - cutting height - cutting angle - rip fence - angle fence - scorer height - scorer side The machine has been checked and adjusted by a factory fitter The interface card has been renewed Wear parts have been renewed The machine has been cleaned and is ready for operation Used Make Altendorf Type Elmo 4 Myvfbm8Y07 Year of construction 1995 MachineNo. 95-6-31 GS-holzstaubgeprüft Motor 5,5 kW Carriage length approx. 4300 mm Cutting width approx. 1300 mm max. blade diameter 350 mm tiltable up to 45° scoring unit 2 axes control panel top tiltable rip fence with automatic control table top extension height adjustment electric tilt adjustment electric digital display: - height - cutting angle - rip fence - angle fence - space requirement approx. 4300 mm x 3200 mm x 1700 mm weight approx. 1100 kg storage location 97447 Gerolzhofen, free loaded, unpacked handover as seen, without guarantee and warranty

Condition: good (used), Panel saw Altendorf Type: F 90 Machine no. 67-6-7 Sliding carriage length 2550 mm Motor power 5.5 kW belt drive, 2 speeds Extraction hood from above Cutting width to the right of the saw blade 800 mm Maximum saw blade diameter 400 mm Information on cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Fzja2Ak Including 3 saw blades diameter 350 mm Packaging dimensions 2600 mm x 1400 mm x H 1500 mm Weight 855 kg

Condition: as good as new (ex-display), -Exhibition machine- Double trolley swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm F3Hqvax Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm New exhibition machine

Year of construction: 2021, Condition: new, New machine Year of construction 2021 BASIC EQUIPMENT Type 1 Manual height and tilt adjustment 0 46° of the saw blade, with digital display Drive power 4 kW (5.5 hp) with one speed, 4,200 rpm. Double roller carriage, carriage length 3,200 mm Angle mitre fence, cutting to length up to 3,450 mm Saw blade diameter max. 315 mm, saw blade projection max. 104 mm Cutting height 100 mm, 70 mm at 45° Machine height 88 cm ? 4kW (5.5 HP), 1 speed ? Rip fence, 1,000 mm ? Large extraction hood (PSV) ? Basic scoring unit with LED lighting Dei3Ljjpx Availability: short term Storage location: Solingen

Condition: new, The Altendorf F 25 offers everything in a small space, what a sliding table saw must be able to do. And that in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: By9Cvudwed - Manual height and swivel adjustment 0 - 46 ° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Sliding trolley, trolley length 3200 mm - Crosscut-miter fence, lengths up to 3450 mm - Braking device, illuminated button - saw blade diameter max. 315 mm, - Saw blade protrusion max. 104 mm - Cutting height 100 mm, 70 mm at 45 ° - Machine height 88 cm Package 3 including: - 5.5 kW (7.5 HP), 2 speeds - DIGIT X rip fence, 1000 mm - Large suction hood (PSV) - Basic scorer with LED lighting

Condition: as good as new (ex-display), The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. ? the F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, Bxqqnegbd man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - new exhibition machine