Used Chain Rotator for sale (10,314)

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Dsdpfx Alstp S E Esbocl Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Dcsdpfx Aewd Tgfolbsl Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw. Dcedpfeufib Rex Albol

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Dcodpfjh Un Haex Albsl Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, weight max. 0,25 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Dcjdsh Un Hdopfx Albel Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, weight max. 0,5 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Dcedpfx Aeh Un E Sslbjl Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 29,900 mm, fork length: 1,200 mm, total length: 9,140 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 29.90 m · Maximale seitliche Reichweite 25.90 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Turret rotation (Max.) 360 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FTT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW · Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatic with Speedshift · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 9200 daN · Parkbremse Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % Dedpfx Aozy Spnslbecl · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Hydrauliköl 300 l · Fassungsvermögen des Kraftstofftanks 320 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 67 dB · Außenschallpegel (LwA) 108 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Electric chain hoist, electric lifting device, crane HADEF Load capacity: 125 kg Hook path: 3.8 meters Lifting speed: 10 m/min. Fine lifting speed: 3.3 m/min. Dcodpfx Asxcil Eelbol 1 load strand

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Dcsdpfxjxcil So Albjl Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min 1 load chain

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, overall weight: 428 kg, load capacity: 4,000 kg, DGUV certified until: 08/2027, Seith 40.55 rotating device with the following specifications: Load capacity: 4,000 kg Load center of gravity: 500 mm Mounting: FEM IIIA Overall width: 1,100 mm Year of manufacture: 2015 Weight: 428 kg Center of gravity: 95 mm Overhang: 210 mm Dodpfozhhcyox Albocl Net price ex works, excluding forks (Price for forks available upon request) Inspection and demonstration are available by appointment. Sale is exclusively to commercial customers; subject to prior sale, errors and omissions excepted. Transportation costs available upon request. Further information and offers can be found on our newly designed website.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Coming soon: Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Length of infeed belt: 6804 mm Length of incline belt: 11056 mm Gooseneck: 2167 mm Incline: 27.5° Usable width: 1400 mm Note: The conveyor belt is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. Djdpszyl H Tsfx Albscl The baler shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is possible, and it can be revoked at any time. Inspections are possible by arrangement. Sale is made upon advance payment, ex works, without warranty.

Condition: used, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, Rotating forklift Magni RTH 8.35 Drive Diesel Year built 2026 Lifting height (mm) 34,900 Lifting weight (kg) 8,000 Dcodjzgltyepfx Albjl

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 645 h, load capacity: 6,000 kg, lifting height: 21,800 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, fork carriage width: 1,030 mm, fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic forklift Load center: 500 Fork width: 100 mm Fork thickness: 60 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 20 Condition: As new Technical condition: Good Front tire type: Air Front tire size: 445/65 R22-5 Front tire condition: 60 - 80% Rear tire type: Air Rear tire size: 445/65 R22.5 Rear tire condition: 60 - 80% Battery voltage: 12V Dcedpfxezy Tl Re Albel Battery type: Starter Battery year of manufacture: 2023 Battery condition: 60 - 80% 3rd valve, 4th valve, heater, dust filter, full cabin, full free lift, CE certificate, scale, interior mirror, exterior mirror, windshield wiper, seat, quick-change coupling for 3rd hydraulic function, quick-change coupling for 4th hydraulic function, Easy Link module, TÜV preparation: 20 km/h, attachment recognition system.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,200 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Dcsdpszxu Hmofx Albsl Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 18-22 Front tires condition: 80-100% Rear tires type: Pneumatic Rear tires size: 18-22 Rear tires condition: 80-100% Description: Thanks to its 3-in-1 design (telehandler, crane, and work platform), the MRT 2660 is a highly versatile tool for your material handling needs. The MRT 2660 can lift up to 6 tonnes, and its pentagonal boom profile along with exceptional 360° visibility ensures precise control over your loads. With 360° rotation, you can perform various tasks without repositioning the machine. It can be used on wheels or stabilizers, which provide an increased footprint for safe operation. The MRT 2660 is intelligent, ergonomic, and comfortable, making it ideal for construction and industrial applications. It is a powerful and precise tool you won’t want to be without! A variety of attachments such as man basket, winch, or bucket are available for this telehandler. 3rd hydraulic valve, heater, full cab, air conditioning,

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Rotating forklift Manitou MRT 2660 vision Drive Diesel Dcedpfezxug Hsx Albol Year built 2026 Lifting height (mm) 25,900 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Djdpfx Alozy I Tcobscl

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist Dcodpfji A S Edox Albjl -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m Quantity: 1 piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

Condition: excellent (used), functionality: fully functional, power: 120 kW (163.15 HP), operation weight: 24,700 kg, chain condition: 85 %, digging bucket width: 1,200 mm, Year of construction: 2017, operating hours: 12,261 h, Equipment: cabin, LIEBHERR R924 LC, with additional hydraulics, air conditioning, year 2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of manufacture: 2017 • Operating hours: 12,261 hours • Weight: 24,700 kg • Power: 120 kW / 163 hp • Bucket: 1.20 meters wide, with teeth Dedpfxszd Tdhs Albocl • Mono boom • Central lubrication system • Additional hydraulics for hammer and grapple • Additional work lights • Cab protection • All-round view cameras • Chains in 85% condition • Air conditioning • Heated seat • Full service history at Liebherr • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions.

Year of construction: 1999, condition: used, Crane attached to the warehouse, 5 m reach, 500 kg load capacity, without Schmalz lifting device! Dodpfxjv Dau Do Albocl Storage location: Nattheim

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Dodpfxovvku Eo Albscl

Condition: used, Year of construction: 2014, operating hours: 15,113 h, * Deep-excavation bucket * Central lubrication system * Camera Dodezyzntopfx Albecl * Power: 170 kW * Weight: 33,200 kg -----Internal vehicle number: 12435 Errors and prior sale excepted.

Condition: good (used), Year of construction: 2002, Track excavator with 3 buckets Dsdpfxezcribj Albjcl with additional counterweight

Condition: new, functionality: fully functional, machine/vehicle number: HR14346, Year of construction: 2026, load capacity: 4,500 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 14,100 kg, total length: 7,260 mm, drive type: Diesel, construction width: 2,420 mm, Rotatable telehandler Chassis number: HR14346 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: CAMSO A8 158 4LR1 4057020 14PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: CAMSO A8 158 4LR1 4057020 14PR Dcodpfx Aleyn Tcmebol Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, seat, battery 2x12V wheel chocks TÜV preparation

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 250 kg, For sale is a used ABUS LW wall-mounted jib crane from our workshop. Technical specifications: Manufacturer: ABUS Kransysteme GmbH Model: LW wall-mounted jib crane Type according to nameplate: LWW Rated load: 250 kg Outreach: approx. 7.00 m Year of manufacture: 2009 Factory number: 151-016821 Article number: NOH375-48 Includes existing accessories Excluding chain hoist The crane is in used condition, with signs of wear and tear consistent with its age. Typical signs of use and paint chipping are present. The crane is sold as is, in the condition and with the accessories shown. An inspection is possible after prior appointment. Dismantling and collection are the responsibility of the buyer. Assistance with loading can be provided upon request. Dodpfxszylame Albocl

Condition: ready for operation (used), functionality: fully functional, mileage: 1,727 km, power: 202.26 kW (275.00 HP), fuel type: diesel, next inspection (TÜV): 08/2027, shovel volume: 1.6 m³, digging bucket width: 1,560 mm, Year of construction: 2018, operating hours: 1,727 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast type: Mono Bucket volume: 1.6 m³ Bucket width: 1,560 mm MACHINE DETAILS Power: 202.26 kW (275 hp) Fuel type: Diesel Fuel tank volume: 450 l Drive condition: 100% Next inspection (TÜV): 08/2027 Total weight: 37,000 kg Operating hours: 1,727 h EQUIPMENT Additional headlights Air conditioning Grabber hydraulics Dedpfx Aszygabelbocl Hydraulics Low noise On-board computer Auxiliary heater Standard bucket