Used Rotation Gear for sale (14,721)

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Lajdpfjzw H Hiox Abzog Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Lsdpfezxxifox Abzeag Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Laodewvbqiopfx Abzog Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Ljdpfx Abergahxszeag

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle Laedpfx Absrtrzdszog (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Hydraulically switchable gearbox for changing the direction of rotation Lasdpodz Sp Djfx Abzeg Hydraulic reversing gearbox for a lathe Year of manufacture: approx. 1985 Reversing gearbox for quick changes in the direction of rotation, either clockwise or counterclockwise - Electric hydraulic pump for generating hydraulic pressure (380 volts, 0.25 kW) - 2 solenoid valves for switching from counterclockwise to clockwise rotation - Equipped with pulleys with a diameter of 230 and 200 mm - Was driven by a 15 kW drive motor, enabling quick changes in the direction of rotation with high torque transmission - The drive motor always runs clockwise; the gearbox is hydraulically switched to clockwise rotation, counterclockwise rotation, or brought to a standstill without any control input. Overall dimensions (L x W x H): 480 x 520 x 430 mm Weight: 170 kg In good condition.

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Lsdpfx Absqcvkvezsag Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: Lsdpfxjymf Daj Abzsag - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm Lasdpfxewftuxj Abzjg --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Total weight: 38 tons Ljdpsz Df A Tofx Abzsag The clamping table has been disassembled and overhauled.

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 Lajdezr Rpdopfx Abzog total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm Lsdjzr Rpkopfx Abzsag max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Lasdpfx Ajxdfa Uobzsg Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Laodpfxezn Aymo Abzeg Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Laedpfxozwqyyo Abzjg Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 Lajdpfx Abjz Dk Afozeg turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 min. module 1 Laedpfx Absz Drcajzog total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. Ledpfexwlthjx Abzoag A video of the machine can be sent via WhatsApp.

Condition: ready for operation (used), Year of construction: 2008, Fells axial forming machine with automated part feeding. Laodoz Dnt Uepfx Abzog The machine was used to apply splines to tripod joints. CV joint splines, etc. The manufacturer specifies a maximum diameter of 50 mm for the spline working area. Further technical data can be found in the images.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 679, overall weight: 8,000 kg, Equipment: documentation/manual, Höfler Helix 400k gear grinding machine The HÖFLER Helix 400k is currently in operation at our customer's production facility and is fully ready for use. An inspection and machine demonstration under production conditions can be arranged by appointment. The machine has been regularly serviced and maintained by Buss-Maschinenservice for several years. As part of the maintenance work carried out to date, all pneumatic hoses have been replaced, and several servo drives and servomotors have been overhauled or replaced. The mechanics have been inspected, and any necessary repairs have been carried out. Lasdpfx Asz Dqtwjbzsg The machine is being sold due to the purchase of new equipment. If desired, we will handle the complete machine relocation – from professional dismantling and packaging to transport, installation, commissioning, and customer training at the new location.

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Colour: Blue Empty weight: 2.500 kg - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 Lajdpfxjzkui So Abzeg - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Ljdpfspxmlisx Abzoag Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: excellent (used), max. wheel diameter 250 mm gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 cone distance 310 mm Ljdez Dbzrepfx Abzjag pressure angle 15 - 30 ° blade cutter head diameter 450 mm pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...

Condition: good (used), Year of construction: 2009, operating hours: 41,994 h, functionality: fully functional, GLEASON-PFAUTER P 1600/2000 – Internal and external gear cutting – Ø 2,000 mm – 2009 Machine data Field | Information Manufacturer | GLEASON-PFAUTER Type | P 1600/2000 Year of manufacture | 2009 Machine type | CNC gear hobbing machine / gear cutting machine Machining process | Internal and external gear cutting Workpiece nominal diameter | 1,600 mm Max. workpiece diameter | 2,000 mm Nominal module | 20 / 30 mm Module, special version | 25 / 35 mm Tool head swivel range | +30° / −45° Tool diameter max. | 350 mm Tool length max. | 375 mm Tool speed | 20–200 min⁻¹ Further speed ranges according to manufacturer | 26–265 / 36–360 min⁻¹ Tool head drive power | 35 kW Special version according to manufacturer | 52 kW Distance between workpiece and tool axes | 100–1,000 mm Special version | 100–1,200 mm Axial slide travel, standard | 700 mm Lowest tool head position above table | 450 mm Table diameter | 1,460 mm Table bore Ø | 500 mm Table bore depth | 875 mm Table speed max. | 8 min⁻¹ Table load max. | 20,000 kg Machine width | approx. 6,900 mm Ledpfx Aez Au Rtebzsag Machine length | approx. 8,400 mm Machine height | approx. 4,700 mm Machine weight | approx. 33,000 kg Electrical data for the specific machine Field | Value Operating voltage | 400 V Frequency | 50 Hz Connected power | 100 kVA Rated current | 155 A Fuse rating | 160 A Control voltage | 24 V Description for machine search GLEASON-PFAUTER P 1600/2000 CNC gear cutting machine, year of manufacture 2009 Heavy-duty vertical CNC gear cutting machine for machining large gear components. The machine is equipped for machining both external and internal gears and features a very large working area up to Ø 2,000 mm. The massive workpiece table has a diameter of 1,460 mm and is designed for workpiece weights up to 20,000 kg. The tool head can be swiveled from +30° to −45°. Maximum tool diameter 350 mm, maximum tool length 375 mm. Of particular interest is the existing configuration for internal gear cutting, which distinguishes the machine significantly from a classic external gear cutting machine. The machine is particularly suitable for the production of large: Gears, internal gear rings, bevel gears, large gearbox components, industrial gearboxes, wind turbine gearboxes, planetary gearboxes, and heavy-duty drive components. Technical key data: Workpiece diameter up to 2,000 mm, module up to 25/35 mm according to manufacturer's specifications, table Ø 1,460 mm, table load 20 t, machine weight approx. 33 t. Technical data according to available manufacturer documentation and nameplate. Subject to prior sale and errors.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg Lasdpozy Satsfx Abzeg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode