Used Button for sale (1,935)

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection Ijdez A Hh Ujpfx Ah Estl

Condition: good (used), Year of construction: 1997, Industrial Pasta Mixer / Extruder Dominioni Punto & Pasta PT100 – Stainless Steel – 380V General Information Manufacturer: Dominioni Punto & Pasta Model: PT100 Year of Manufacture: 1997 Country of Origin: Italy Condition: Used – good working condition Availability: Immediately available Machine Description Industrial pasta production machine manufactured by Dominioni Punto & Pasta (Italy), model PT100. The machine is designed for fresh pasta production and dough processing in professional food production environments. Suitable for: fresh pasta production, dough mixing and kneading, pasta dough preparation, food laboratories, pasta factories, industrial food processing. The machine is made entirely of food-grade stainless steel and built for continuous industrial operation. Equipped with: large stainless steel mixing hopper, industrial extrusion outlet, electrical control panel, emergency stop button, heavy-duty industrial drive system. Technical Specifications Model: PT100 Machine Type: Industrial pasta mixer / extruder Capacity: approx. 100 liters Voltage: 380V / 3-phase Construction: Food-grade stainless steel Year: 1997 Manufacturer: Dominioni Punto & Pasta Made in: Italy Advantages Professional pasta production equipment Heavy-duty industrial construction Fully stainless steel machine Reliable Italian manufacturing Easy cleaning and maintenance Suitable for continuous production Ideal for pasta workshops and food factories Machine Condition The machine is in good working condition and can be inspected/tested on site. Normal signs of use according to age. Sold as shown in the pictures. Iedsy Uczaspfx Ah Eetl Included electrical control panel, extrusion outlet, accessories visible in the photos. Additional Information Upon request, we can provide: working video, additional photos, additional technical information.

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Itedpfx Ahjzq E Hbo Eol Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, mileage: 27,000 km, power: 215 kW (292.32 HP), first registration: 07/2025, fuel type: hybrid, color: black, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Comfort Package, lumbar support for front left and right seats, electrically adjustable, ambient lighting, inductive charging tray for smartphone (wireless charging), luggage compartment package, light alloy wheels front/rear: 7.5x18 / 8.5x18 (V-spoke 780, bicolor), metallic paint, seat cover / upholstery: perforated Sensatec, sun protection glazing (darkened at the rear), sports seats front Additional equipment: Ijdpfx Aozt D Hxsh Eotl Storage package, airbag on passenger side can be deactivated, airbag driver/passenger side, acoustic pedestrian protection (exterior sound), equipment package: Connected Professional, service system: Remote Services, exterior equipment: Shadow-Line high-gloss, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, BMW Live Cockpit Plus, service system: Intelligent emergency call including TeleServices, service system: BMW Intelligent Personal Assistant, BMW Curved Display, on-board computer, DAB tuner (digital radio reception), roof rails high-gloss Shadow-Line, anti-theft wheel bolts, through-loading system (rear center armrest), dynamic brake light, dynamic traction control (DTC), first aid kit, driving assistance system: driving experience switch, remote unlocking of tailgate, floor mats velour, footwell lighting front, luggage compartment separation (net), luggage compartment lighting, speed limiter (speed limit device), rear lights LED, hybrid 215 kW (engine 2.0 L - 135 kW), interior equipment: interior trim Quartz Silver matte, body: 5-door, automatic climate control 3-zone with automatic recirculation control, head airbag system rear, head airbag system front, rear headrests folding, charging cable with Schuko plug, steering wheel (sports/leather) with multifunction buttons, light alloy wheels, model refinement (2), gasoline particulate filter (OPF), park distance control (PDC) front and rear, parking assistant package, driving assistance system: parking assistant, driving assistance system: parking aid side, driving assistance system: reversing assistant, driving assistance system: reversing assistant with emergency braking function (Active PDC), parking brake electrical, personalization system (Personal eSIM), low emission according to emission standard Euro 6e, turn signal lights LED, side airbag rear, side airbag front, service system: eDrive Services, seat heating front, mirror package, exterior mirrors electrically foldable, exterior mirrors with automatic curb function, right, interior mirror with automatic anti-dazzle function, start/stop system (function), warning triangle, widescreen display, heat protection glazing tinted, windshield (version: climate comfort).

Condition: used, mileage: 58,100 km, power: 120 kW (163.15 HP), color: white, gearing type: mechanical, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: CF0 Basic chassis, CL1 Steering wheel adjustable for inclination and height, CL2 Leather steering wheel and leather gearshift lever, CL4 Multifunction steering wheel with trip computer, D51 Solid partition with 1 window, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E2R Radio generation 2, E34 Buffer battery for starting, E57 Electrical system for trailer socket, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EL8 2-way front speakers, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, EZ5 Parking package, EZ8 PARKTRONIC, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FKA BOX VAN, FR1 Rear camera, not foldable, FR8 Reversing camera, FY7 Multi-button remote control, FZ8 Comfort opening and closing with IR remote control, GE1 6-speed manual transmission TSG 380, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN3 Wheelbase 3430 mm, long overhang, J55 Seatbelt warning for passenger seat, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K56 Diesel filler neck in red, KB5 Main tank 70 liters, LA2 Headlamp assist, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, M60 Generator 14 V / 250 A, M72 Vehicle capable of running on HVO, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 TEMPOMAT, MT6 Emission class Euro 6d N1, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, S23 Passenger seat, single seat, SA6 Airbag passenger, SB1 Comfort driver's seat, V3L All-weather floor mats, V43 Wooden floor, VA2 Interior lining cargo area up to roof height (wood), VF4 Fabric Caluma black, VV2 Load securing rail system, VV9 Attachment points in the roof frame, W54 Rear doors, double-leaf, opening to the side wall. We would be happy to provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we would be happy to provide you with a customized offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior appointment! All information without guarantee, errors and prior sale reserved! Images are for illustration purposes only! Deviations from advertisements or other descriptions are possible due to errors, incorrect data, transmission errors, etc.! ESP, Navigation system, Particulate filter, New MOT, Partition = Further information = Engine displacement: 1,950 cc GVWR: 2,800 kg Please contact Tobias Ebert for further information. Itodpfsz Dqpfex Ah Esl

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Isdpoz Afhpefx Ah Eetl Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Iodpfx Ahjzbunks Ejtl Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min Itodpfszh Hbnex Ah Eol • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: good (used), Year of construction: 1984, functionality: fully functional, Offered from a workshop for people with disabilities is a fully functional panel saw. Altendorf F45 Tiltable up to 45° via handwheel Year of manufacture 1984 With scoring saw (no saw blade included) Itedpfx Aezdqxveh Esl Max. saw blade diameter 400 mm A 350 mm blade is installed Max. cutting height with a 350 mm blade = 98 mm at 90° – 75 mm at 45° With motor brake (approx. 2.5 seconds to stop) Carriage length 2500 mm Cutting width to the right of the saw blade 850 mm Speeds 3/4/5/6000 rpm With cutting line laser Gresser HEnE 632.8 nm 380 Volts Weight 990 kg Emergency stop button + used and new saw blades as shown in the picture

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button Iodpew Aqndofx Ah Ejtl - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Itjdpozuw H Iefx Ah Ejl Operating Hours: 9370 hours

Condition: used, Year of construction: 2021, Universal tool milling machine Manufacturer: FPS Model: 620 M-NC Year of manufacture: 2021 - workshop inspected Machine No.: 00 7020 Approx. 1,200 operating hours for the spindle Geometric acceptance with test report Iedezy Eqrjpfx Ah Estl Accessories and installed options: - 3D control system SIEMENS 840D sl - Portable electronic handwheel - LED machine light - Machine type switch via key switch to machine tool type, manually controlled milling machine. With the machine open, the manual operation mode and the electronic handwheel can be used. The functions of axis movement and speed control are possible without having to continuously press the enable button. The machine type switch only affects the vertical machining. - Mechanical safety handwheels with scale in all axes - Orientated spindle holder, vertical and horizontal with cycle for thread cutting without a collet - Fixed table 820 x 420 (T-slot: 14 mm) - Tool holder, vertical and horizontal SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system, free-standing, 80 liters - Splash guard cabin, moving with the machine with sliding doors and foldable, electrically secured - Control panel mounted on the lower frame and swiveling - CE documentation in printed form and on USB stick - CE declaration of conformity Used, as is The machine is technically in the condition of its year of manufacture.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame Itsdpfjykam Dsx Ah Eol • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 99-13537, conveyor belt length: 7,000 mm, conveyor belt width: 800 mm, total length: 12,600 mm, overall weight: 3,800 kg, type of input current: three-phase, input frequency: 50 Hz, input current: 50 A, motor manufacturer: Caljan, load capacity per storage section: 50 kg, Equipment: emergency stop, Conveyor is used, but still in a good condition. It was not used a lot. Everyting is working fine. Belt is moving forward and back just in a second switching and using button. For best result it has to be anchored into the concrete. It is possible to check ant it is ready to ship. Isdpfxjy Ntwns Ah Ejtl

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° - Hydraulic clamping device - Coolant system Itodpfjyzy Azsx Ah Ejl - Emergency stop push button

Condition: excellent (used), Year of construction: 2021, operating hours: 293 h, functionality: fully functional, machine/vehicle number: 2115011184, - Heavy-duty design - Compact construction - SIEMENS servo motors on all axes - All servo motors with integrated encoder for maximum precision - 30° slant bed design for particularly large machining diameters - Improved, unobstructed chip flow into the chip tray - Hydraulic three-jaw chuck Ø 200 mm - Hard and soft top jaws - Standard tool turret VDI 30 with 8 tool stations - Hardened and precision ground ball screws for high rapid traverse speeds on all axes - Dimensionally stable linear guides ensure a long service life through maximum static and dynamic rigidity - Manual tool measurement device - Tailstock with hydraulic quill - Heat exchanger - Portable electronic handwheel with enabling button and emergency stop rocker switch for easy program setup - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Halogen work light for complete illumination of the workspace - Coolant system - EMC (Electromagnetic Compatibility) - SINUMERIK 828D Basic ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer tailored financing options to suit your needs. Whether it is a down payment, installment plan, or a customized financing model – together we will find the right solution. On request, we can also handle the entire transport process. From planning to reliable delivery, we ensure a smooth and punctual transaction so you don’t have to worry about a thing. Iedpsyzr Snefx Ah Ejtl 📞 Feel free to contact us for further information or a non-binding offer. We offer you personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, mileage: 16,142 km, power: 90 kW (122.37 HP), first registration: 03/2002, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro3, loading space width: 1,800 mm, loading space length: 3,250 mm, loading space height: 1,870 mm, Year of construction: 2002, total length: 5,506 mm, total width: 1,998 mm, total height: 2,490 mm, number of seats: 4, Equipment: ABS, all wheel drive, parking heater, Extremely clean and like-new Fiat Ducato 2.8 JTD with Dangel all-wheel drive, differential lock, and off-road gear reduction; former reconnaissance vehicle from the disaster relief service, originally with only 16,142 km +++ original condition, no welding Two-seater bench seat mounted on adjustable rails with a large storage compartment – 4 registered seats, 2 built-in shelves, 2nd battery with integrated charger via 220V external power supply, voltage converter, 2 sliding windows in the sliding door and opposite, with curtains or a roller blind on the sliding door, small roof hatch, auxiliary heater, electric mirrors, ABS, airbags, rear doors with a 270-degree opening angle, fog lights, Dangel 4x4 all-wheel drive with differential lock Includes technical modifications to convert it into a commercial vehicle (SoKFZ) for office use with 4 seats or as a truck – making it fully tax-deductible for businesses Special signals are functional, rotating beacons with imitation leather cover and push buttons Unladen weight 2,694 kg, permissible total weight 4.0 tons, can be reduced to 3.5 tons without technical modifications Fresh inspection recently completed with engine oil and brake fluid change Differential on the rear axle newly sealed Hose system for headlight adjustment renewed M+S tires from Continental with 8.5-9.5 mm tread depth all around, DOT 2021 A beautiful vehicle ready to drive Interior dimensions from partition: 3250 x 1750 x 1850 mm (L x W x H) Exterior dimensions: 5505 x 1998 x 2490 mm (L x W x H) +++ Subject to errors, changes, and prior sale Ijdsz A Ncnjpfx Ah Eotl

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm Itodpfx Ahszz S D Is Eel dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Itodpfx Aszmh Nkeh Eel Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed

Condition: used, functionality: fully functional, machine/vehicle number: 102, Jumberca SJM-3 single-sided circular knitting machine, machine number 102. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA: Diameter: 30 inches, Gauge: GG 24, Number of needles: 2304, Manufacturer: Jumberca S.A., Badalona, Made in Spain, No CE marking. APPLICATION: Single-sided knitted fabric in fine gauge: shirts, underwear, nightwear, and lightweight outerwear. FREQUENCY CONVERTER: The machine is equipped with a 400 V Toshiba frequency converter mounted on the control column, with electronic speed regulation. INSTALLED EQUIPMENT: Toshiba 400 V frequency converter, Kübler hour meter and counter, Jumberca panel with eight indicator lights, main switch, Square D control panel with start, stop, and emergency stop buttons, Memminger-IRO Pulsonic 3 Mini lubricator, complete upper cam, fabric take-up system with chains and sprockets. CONDITION: Complete and assembled machine, currently protected with film for storage. Fabric from the last production run remains in the machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: Approximate dimensions: length 2.70 m, width 2.00 m, height 2.70 m. No disassembly required. Location: Albacete, Spain. Itjdpfxozvphto Ah Eol

Condition: excellent (used), Year of construction: 2021, TMUA VR30 Belt Grinder, variable speed. Year: 2021. The WR can be used for deburring, edge rounding, brushing, superfishing, or manual polishing of parts made of any material and of any shape. The motor and unit assembly can optionally be mounted on a reinforced sheet metal base. The working units are adjustable around the motor shaft, and the housings are equipped with a Ø 120mm suction nozzle. Motor specifications: WR30: 2.2 Kw – 3000 rpm – 220/380v three-phase power supply. Control box: Variable speed drive in an enclosure with a potentiometer, emergency stop, and push button. Itedpfoy U N A Rsx Ah Eel

Condition: used, input voltage: 380 V, total length: 1,320 mm, total width: 940 mm, total height: 830 mm, tank capacity: 250 l, overall weight: 540 kg, power: 1.5 kW (2.04 HP), Ref: SP 100 L Flour capacity: 100 kg Dough capacity: 160 kg Bowl volume: 250 L Number of speeds: 2 Tool speeds: approx. 110 / 220 rpm Spiral power: 6.5 kW Bowl power: 1.5 kW Timers: 2 Bowl rotation: right / left Controls: push buttons Dimensions: 940x1320x830mm Weight: 540 kg KEMPER SP 100 L spiral mixer – 100 kg of flour The KEMPER SP 100 L is a professional spiral mixer with a fixed bowl, designed for bakery productions requiring large-scale kneading. Its documented capacity reaches approximately 100 kg of flour for 160 kg of dough, with a bowl of approximately 250 L. This configuration makes it a suitable model for bakeries seeking high capacity while maintaining a simple workflow around an integrated bowl. Why this model stands out The SP 100 L uses the zone kneading principle developed by KEMPER. The dough is worked between the spiral and the bowl according to a geometry designed to promote homogeneous kneading while limiting its heating. The model has two speeds, with tool speeds of approximately 110 and 220 rpm, to differentiate the phases of the cycle. Two electromechanical timers allow the working times to be adjusted. The bowl rotation is reversible, to the right or left, which provides greater control during incorporation and kneading. Key advantages 100 kg flour capacity Iedpfoz Arlujx Ah Eetl 160 kg dough capacity 250 L bowl Two kneading speeds Two electromechanical timers Reversible bowl rotation (right / left) Bowl and spiral made of stainless steel KEMPER zone kneading system Bowl protection with safety device Closed body facilitating routine maintenance

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment Itsdpfozpzy Iox Ah Esl - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Dough mixer Rego SM 2 E For mixing and whipping doughs/creams/mixtures Includes 1 whisk Includes 1 20-liter stainless steel bowl Bowl size (liters): 20 / 16 Digital timer Continuously variable speed control Electric bowl height adjustment Ijdpsz A Sr Ejfx Ah Eetl Switch from whipping to mixing with the push of a button

Condition: used, Lippelt Moli 580 seed station Working width: 580 mm One-sided seed application 1 x distribution hopper with brush 1 x distribution hopper with fine and coarse spreading roller Itedpfx Ahjz A Sbge Eel Humidification via water bath Pressing roller to secure the seeds to the dough pieces Grid belts, removable Movable seed collection container Control with start/stop button, 2 x potentiometers for belt speed and spreading rate, and emergency stop button.