Used Button for sale (1,916)

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Pedpei Ri Szofx Ah Hegg Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis Jumbo semi-trailer Welded steel construction with narrow cross member spacing and reinforced design, low loader external frame profile, for transporting construction machinery up to 32000 kg and up to a max. external width of the construction machinery of 2550 mm, fifth wheel plate with replaceable 2 king pins. Rear inclination to approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/checker plate, In the low bed Omega rail on the side at the bottom of the outer frame as a suspension strip for tarpaulin and spacer for the lashing points, not in the wheel area. With lift table on an additional fixed lightweight outer frame with omega profile, lift table can then be raised with closed tarpaulin! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, free swing radius to the rear approx. 1950 mm, Folding rear support 2 wheel chocks with holder Aluminum side bumpers Quarter-shell mudguards in front of and behind each axle With anti-spray flaps behind each axle Steel underride guard Rear spray flaps across the entire width 4 stainless steel storage box, w=800/h=350/t=350 mm, with polished door, lockable 2 x in FR-left and 2 x in FR-right in front of the 1st axle Pedpoi Riw Aofx Ah Hjgg Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically for transfer to gooseneck, with mechanical locking when raised. (inclined cylinder for good ground clearance, Fliegl standard). Operation in FR-right + additional operation with radio remote control (same as ramp operation) Lifting table can be raised with closed tarpaulin! Tarpaulin suspension in the lift table area on an additional fixed lightweight outer frame with Omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms can also be used when lowered! Lashing eyes Gooseneck: 4 pairs of 5 to lashing eyes embedded in the outer frame 2 pairs of lashing points at the top and sides of the outer frameLow bed 8 pairs of lashing mushrooms at the top and sides of the outer frame, each 10 tons 9 pairs of 5to embedded in the outer frame Axles+suspension SAF drum brake axles last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve + auto-reset function H & S function with quick air release 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Wheels and tires 235 / 75 R 17,5 from leading manufacturers Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front, in LED 2 white/red lane departure lights at the rear, 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illum

Condition: new, machine/vehicle number: 8fbda13da8c595f64678f0f82, empty load weight: 2,100 kg, maximum load weight: 11,300 kg, overall weight: 13,400 kg, axle configuration: 2 axles, tire size: 275/70 r 22,5, Further information Chassis central axle trailer Fine-grained steel welded construction Fifth wheel coupling, make of our choice for 2 kingpins. with ball bearing slewing ring, max. 20° stop Support on drawbar and dolly at the front Wheel chocks with holder Steel underride guard Half-shell mudguards Towing device central axle trailer CLG under-coupler drawbar with tested 50 mm towing eyes to the dolly and to the motor vehicle, including drawbar lock on the truck! Axles + suspension BPW disc brake axles Air suspension for Swap Train version Standard Saddle height lowered approx. 1100 mm, saddle height raised approx. 1280 mm, saddle height approx. 1140 mm, Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the motorized trolley, 2 non-interchangeable coupling heads with Wendelflex connecting lines to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cable, EBS Wendelflex connecting lines to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering, ECAS, via truck control, Ecas CAN 2 bus required in the truckwithout Ecas CAN 2 bus in the truck, additional operating control required in the truck (not included in the scope of delivery):Electrical system with a pre-assigned cable and a distributor box. Operation with 15-pin socket pin 11 and 15 with 2 x 7-pin socket pin 7 and 5 Note! This version must still be technically tested in conjunction with the trailer, it is likely that the dolly and the trailer can only be raised and lowered together if this is not technically possible, operation is via WABCO eTASC with hold function in lowered position + auto-reset function (no power required from the truck). Additional operation on the vehicle via WABCO eTASC + hold function in lowering position + auto-reset function (no power required from the truck) Vehicle - driving stability system ECAS only possible in conjunction with WABCO EBS. Pjdpfx Asi Rizxeh Hogg Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Brake release function from truck (via button) on PIN 14 and additionally via button on vehicle next to H & S valve, for releasing the brake when coupled, EBS power supply must be guaranteed! with Can Router Wheels and tires 275/70 R 22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights 2 white LED position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 2 x 7-pin non-interchangeable plugs with helical flex connection cables to the trailer Cable + plug and/or socket for reversing camera system, depending on vehicle type Operating instructions Note! Please note the currently permitted route network! Towing vehicle must be taken to the Triptis factory for approx. 1 week for adjustment of the towing bar! Please note the CLG recommendation as per the appendixThe following is required before acceptance of the order: Submission of all relevant measurements and dimensions as per the Fliegl CLG form (see appendix) The coupling height of the planned trailer must be

Condition: used, machine/vehicle number: 3ca51192c90a3f38a59d77748, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, tire size: 385/65 r22,5, Year of construction: 2019, Further information Welded fine-grained steel construction, front stop, longitudinally adjustable and foldable, removable pair of guide rollers, front and rear, Swap Guard - swap body guide, in front of and behind each container lock, 4 container locks with sturdy outriggers on 20-base for swap bodies 7.15 and 7.45, turntable with strong ball bearing slewing ring, wheel chocks with holder, Aluminum side collision protection, side collision protection set inwards for optimum clearance to the swap body supports, steel underride guard, underride guard shortened for optimum clearance to the swap body supports, lighting system mounted in a protected position, quarter-shell mudguards at the front and half-shell mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox Psdpfxsi Ri Dzj Ah Hogg Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake systemColored line routing for easy servicing, air supply 208 liters, spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, )Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with lifting & lowering valve, holding function in lowering / lifting position, brake release function via button on the vehicle next to H & S valve, for releasing the brake when coupled, EBS power supply must be guaranteed! 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable, additional LED work light(s) at the rear, switched via reversing light, LED work light at the front centered between the beams, shining to the rear, switched via reversing light Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, hinged, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Psdpfx Ahji Riwqe Hogg Available immediately!

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system Podji Ri Hvjpfx Ah Hegg 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) Pgodpfx Ahsncfd Ro Heg - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. Pgedpfxsdyc Uaj Ah Hsg · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: refurbished (used), Year of construction: 2015, operating hours: 250 h, In the client's order: 3D coordinate measuring machine Hexagon Optiv 432 Pgedpfsdy Hlhox Ah Hjg used multi-sensor CMM with camera, push button • Measuring range single sensor: 400x300x200mm • Dimensions: 1232x910x1663mm Mufjyo • Weight: about 940kg • Max. Workpiece weight: glass plate approx. 30kg • Accuracy: MPEE = 2.9 + L / 100 [? M] • built in 2014 • Software: Vision3D with option on Opticheck3D • incl. Camera with CNC zoom • incl. 6-fold button changer • Including switching push-buttons HP-TM • incl. LED ring light • incl. Calibration standard • incl. 2-monitor operation • incl. New Windows 7 Ultimate evaluation station • incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE OF THE MANUFACTURER (All rights reserved by Hexagon Metrology)

Condition: used, machine/vehicle number: YS2R6X2000201xxxx, mileage: 405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Pgodpfx Ahew Raf Hj Hjg Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil m/ brøyteplate og underliggende skjær. SE VIDEO

Condition: excellent (used), I am selling Weller WSD 81 soldering station. Pgsdpsu Sviwefx Ah Hsg Digital station with soldering iron WSP 80. Infinitely adjustable temperature with buttons, in the range of 50-450 ° C. Digital display. Possibility of locking the temperature control, setting the function of saving the mainsheet (necessary device WCB 1 or WCB 2).

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Pedpfxjud A Hkj Ah Hegg Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically Pgodpfev T Truex Ah Hsg opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. Podsvyumyspfx Ah Hsgg • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch • Steel worktable with adjustable side guides • Power cabinet, distribution board, and cable management • Mobile table with transport brake Psdoud Rddjpfx Ah Hsgg Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Condition: used, Year of construction: 2002, operating hours: 15,900 h, Serial number: 80xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21960 Specifications: Model year: 2002 Hours: approx. 15,900 Operating weight: 15,800 kg Track width: approx. 80 cm Hydraulic grading bucket Digging bucket Extra lights Rotating beacon Radio/CD Pedpfex Azlqex Ah Hsgg Air conditioning Description:Kobelco SK135 tracked excavator from 2002.There are four auxiliary outlets on the stick: two controlled by buttons and two (for a breaker) controlled by pedal.The machine comes with a digging bucket and a hydraulic grading bucket.It has some minor oil seepage.Can be delivered on short notice. Hours: 15900 Own weight: 15800 Model: SK135 SR LC Beltegraver m/ Graveskuffe og hydraulisk pusseskuffe

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Travel distance: X=750mm Y=500mm Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Pedsw Ea Dgspfx Ah Hjgg Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe available directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D PPU 290 Touch Panel control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • Renishaw probe arm for manual tool measurement Pgsdpow Ebmiefx Ah Hjg • Ball screw drive for improved accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors equipped with integrated encoders for maximum accuracy • 45° slant-bed design for increased working capacity • Hydraulic 3-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and live tooling • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement capability • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency-stop impact switch greatly simplifies program setup • Belt-type chip conveyor • Work light for complete illumination of the work area • Coolant system with cleaning pistol Linear guides • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 positions powered by an integrated motor, rated for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High rigidity and durability • Facilitates chip removal SAFETY Integrated Overall package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Trace recording SIEMENS OSS Plus additional package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Dimensions and Weights Length approx. 4,570 mm Width/Depth approx. 1,845 mm Height approx. 1,955 mm Weight approx. 4,200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis Angular accuracy: 51" Repeatability: 20" Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed range: 30 – 4,000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ±0.002 mm Positioning accuracy: ±0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Continuous duty motor output S1: 11 kW Motor output S6-30% duty cycle: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30% duty cycle: 140 Nm Feed Force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN5480 Number of tool stations: 12 Drive motor output: 4.82 kW Max. permissible speed at tool coupling: 6,000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2024, The machine is on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and exceptional service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with recirculating rollers on all axes for high load capacities • High-torque servo drives directly connected to the ball screws on all three axes • Precision-ground, pre-tensioned high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm with inline spindle • Massive, highly precise milling table with five T-slots—large dimensions and precision-ground • Portable electronic handwheel with enabling button and emergency-stop key significantly simplifies program setup • Tool changer with arm gripper, 30 tool positions • Coolant system with chip flushing and cleaning gun • 20-bar internal spindle coolant • Belt-type chip conveyor ensures efficient swarf removal • Chip trolley • Oil separator • LED machine light in the working area • SIEMENS extended warranty package and free online/on-site service (OSS Plus) • 1 year Basic maintenance contract included for Germany/Austria/Switzerland • Control System: • 15.6" color display • 16:9 format • Complete Package: • Safety Integrated • Residual material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Additional Siemens OSS PLUS packages: • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 • Technical Features: • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions & Weight: • Length: approx. 2,856 mm • Width/Depth: approx. 2,300 mm • Height: approx. 2,850 mm • Weight: approx. 6,500 kg • Rapid Traverse Speeds: • X-axis: 36 m/min • Y-axis: 36 m/min • Z-axis: 32 m/min • Electrical Data: • Connection voltage: 400 V • Line frequency: 50 Hz • Power connection: Total connected load 30 kVA • Milling Table (horizontal): • Length: 1,200 mm • Width: 600 mm • T-slot size: 18 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy: • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel Path: • X-axis (auto): 1,000 mm • Y-axis (auto): 620 mm • Z-axis (auto): 630 mm • Vertical Spindle: • Spindle taper: SK 40 DIN 69871 • Speed range: 15,000 rpm • Main drive motor (S1 continuous): 20 kW • Main drive motor (S6-30% cyclical): 52.4 kW Pgodsw Ea Ifepfx Ah Heg • Motor torque (S1 continuous): 96 Nm • Motor torque (S6-30% cyclical): 250 Nm • Feed Force: • X-axis: 6.68 kN • Y-axis: 6.68 kN • Z-axis: 12.01 kN • Feed Motor Torque (S1 continuous): • X-axis: 20 Nm • Y-axis: 20 Nm • Z-axis: 36 Nm • Tool Changer: • Double arm gripper • Tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool change time (tool-to-tool): 2.5 sec.

Condition: used, Year of construction: 2024, Optimum Optisaw SD500AV – Vario Bandsaw with Siemens Inverter Used bandsaw with signs of wear Heavy-duty industrial design Smooth, low-noise operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting precision due to vibration-free running Mitre adjustment from -45° to 60° by swivelling the entire saw bow Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic shut-off Coolant pump Ball bearing saw band guide with carbide inserts for optimal cutting results Easy setting of descent speed via feed rate control valve on the control panel Large, hydraulically operated quick-action vise, self-closing, laterally adjustable Pgsdpox Dzv Eofx Ah Hog Manometer for correct saw band tension Clearly arranged control panel Semi-automatic operation functionality: Closing of the vise and activation of the motor Lowering of the saw bow for cutting Stopping of the motor and return of the saw bow to its home position Dimensions and weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Electrical data Output (motor power): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Supply voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 20–80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle range: -45 to 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data acquisition: Yes Data storage location: On device Data access: Via wireless interface Cutting capacities 0° round (solid): 355 mm 0° square (solid): 300 mm 0° rectangle upright (solid): 300 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle upright (solid): 250 x 250 mm +45° round (solid): 350 mm +45° square (solid): 290 mm +45° rectangle upright (solid): 290 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle upright (solid): 180 x 220 mm Explanation cutting capacity: Cutting capacity determined with aluminum based on saw bow weight. May vary when processing different materials and may be smaller in certain cases (this is not cutting capacity in the strict sense).

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup Pgsdpfxsw Ebv Rs Ah Heg • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Pgsdpfxsw Edbps Ah Hjg Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in showroom condition. Optimill F 200 HSC Premium CNC milling machine direct from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-free machine base · Linear guideway with roller circulation for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precise milling table with five large, precision-ground T-slots · The portable electronic handwheel with enabling button and emergency stop rotary switch significantly simplifies program setup · Coolant system with chip flushing and cleaning gun · Through-spindle coolant supply with 20 bar pressure · Belt-type chip conveyor ensures efficient chip removal · Chip collection trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the work area · Additional SIEMENS material defect warranty package and free online/on-site OSS Plus service · 1-year Basic maintenance contract included in Germany/Austria/Switzerland Milling spindle: Inline spindle Machine specifications Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Torque drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque drive motor S6-30%: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Power of coolant pumps, 3 pcs: 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeat accuracy: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse X-, Y-, Z-axis: 48 m/min Motor torque X-/ Y- / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed forces X-/ Y- / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Pedpfow Ea Avox Ah Hegg Speed range Spindle speed*: 12,000 rpm Pneumatics Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Spindle – table distance: 100 – 650 mm Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed Pgedow Ea Swepfx Ah Hsg X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Pedpfew Ea R Hsx Ah Hegg Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm